component
TCA6408APWR
Public Made by Adomby adom
Texas Instruments I/O Expanders, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/tca6408apwr
5375f7d
TCA6408APWR
Texas Instruments · I/O Expanders · TSSOP-16
TCA6408APWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCCI | power_in | Supply voltage of I2C bus, 1.65 V to 5.5 V, provides voltage level translation. |
| 2 | ADDR | input | Address input connected directly to VCCP or ground for I2C device address selection. |
| 3 | RESET | input | Active-low reset input requiring pull-up resistor to VCCI if no active connection is used. |
| 4 | P0 | bidirectional | P-port 0 input/output with push-pull design structure, configured as input at power-on. |
| 5 | P1 | bidirectional | P-port 1 input/output with push-pull design structure, configured as input at power-on. |
| 6 | P2 | bidirectional | P-port 2 input/output with push-pull design structure, configured as input at power-on. |
| 7 | P3 | bidirectional | P-port 3 input/output with push-pull design structure, configured as input at power-on. |
| 8 | GND | power_in | Ground connection. |
| 9 | P4 | bidirectional | P-port 4 input/output with push-pull design structure, configured as input at power-on. |
| 10 | P5 | bidirectional | P-port 5 input/output with push-pull design structure, configured as input at power-on. |
| 11 | P6 | bidirectional | P-port 6 input/output with push-pull design structure, configured as input at power-on. |
| 12 | P7 | bidirectional | P-port 7 input/output with push-pull design structure, configured as input at power-on. |
| 13 | INT | output | Interrupt output with open-drain structure requiring pull-up resistor to VCCI. |
| 14 | SCL | bidirectional | Serial clock bus with open-drain structure requiring pull-up resistor to VCCI. |
| 15 | SDA | bidirectional | Serial data bus with open-drain structure requiring pull-up resistor to VCCI. |
| 16 | VCCP | power_in | Supply voltage for P-ports, 1.65 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
TCA6408APWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tca6408apwr-etched.step/tca6408apwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tca6408apwr.step/tca6408apwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (50 pp, sha256
4e444553aa8bf678, retrieved 2026-09-18, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TCA6408APWR
**Texas Instruments** · I/O Expanders · TSSOP-16
TCA6408APWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCCI | power_in | Supply voltage of I2C bus, 1.65 V to 5.5 V, provides voltage level translation. |
| 2 | ADDR | input | Address input connected directly to VCCP or ground for I2C device address selection. |
| 3 | RESET | input | Active-low reset input requiring pull-up resistor to VCCI if no active connection is used. |
| 4 | P0 | bidirectional | P-port 0 input/output with push-pull design structure, configured as input at power-on. |
| 5 | P1 | bidirectional | P-port 1 input/output with push-pull design structure, configured as input at power-on. |
| 6 | P2 | bidirectional | P-port 2 input/output with push-pull design structure, configured as input at power-on. |
| 7 | P3 | bidirectional | P-port 3 input/output with push-pull design structure, configured as input at power-on. |
| 8 | GND | power_in | Ground connection. |
| 9 | P4 | bidirectional | P-port 4 input/output with push-pull design structure, configured as input at power-on. |
| 10 | P5 | bidirectional | P-port 5 input/output with push-pull design structure, configured as input at power-on. |
| 11 | P6 | bidirectional | P-port 6 input/output with push-pull design structure, configured as input at power-on. |
| 12 | P7 | bidirectional | P-port 7 input/output with push-pull design structure, configured as input at power-on. |
| 13 | INT | output | Interrupt output with open-drain structure requiring pull-up resistor to VCCI. |
| 14 | SCL | bidirectional | Serial clock bus with open-drain structure requiring pull-up resistor to VCCI. |
| 15 | SDA | bidirectional | Serial data bus with open-drain structure requiring pull-up resistor to VCCI. |
| 16 | VCCP | power_in | Supply voltage for P-ports, 1.65 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `TCA6408APWR`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `tca6408apwr-etched.step` / `tca6408apwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tca6408apwr.step` / `tca6408apwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tca6408a.pdf) (50 pp, sha256 `4e444553aa8bf678`, retrieved 2026-09-18, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tca6408apwr-datasheet.pdf)