component
TCA39306DCUR
Public Made by Adomby adom
Texas Instruments Translators / Level Shifters, VSSOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTCA39306DCUR
Texas Instruments · Translators / Level Shifters · VSSOP-8
TCA39306DCUR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference, 0 V. Common return for both reference rails and internal logic. |
| 2 | VREF1 | power_in | Low-side reference supply for SCL1/SDA1. Recommended operating range 0 V to 5.5 V; supports translation down to 0.85 V (must be at least VREF2 - 0.6 V). |
| 3 | SCL1 | bidirectional | Low-voltage side serial clock line of the I2C/SMBus/I3C bus. Open-drain pass-gate connection to SCL2 when EN is high. |
| 4 | SDA1 | bidirectional | Low-voltage side serial data line of the I2C/SMBus/I3C bus. Open-drain pass-gate connection to SDA2 when EN is high. |
| 5 | SDA2 | bidirectional | High-voltage side serial data line of the I2C/SMBus/I3C bus. Open-drain pass-gate connection to SDA1 when EN is high. |
| 6 | SCL2 | bidirectional | High-voltage side serial clock line of the I2C/SMBus/I3C bus. Open-drain pass-gate connection to SCL1 when EN is high. |
| 7 | VREF2 | power_in | High-side reference supply for SCL2/SDA2. Recommended operating range 0 V to 5.5 V (must be at least VREF1 + 0.6 V). |
| 8 | EN | input | Switch enable input. Drive high (>=1.5 V, up to 5.5 V) to connect SCL1<->SCL2 and SDA1<->SDA2 through the pass-gate switches; drive low to isolate the two sides in a high-impedance state. Typically tied to VREF2 through a 200 kOhm pull-up. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Logic |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
TCA39306DCURTCA39306DCURDDFTCA39306DCURDTM
CAD (KiCad official)
- Symbol:
TCA39306DCUR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
tca39306dcur-etched.step/tca39306dcur-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tca39306dcur.step/tca39306dcur.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (28 pp, sha256
952449a0d65e2f3b, retrieved 2026-08-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).