Generated by kicad-footprint-generator · KiCad file format 20260206
TC74A4-3.3VCTTR
Microchip Tech · Pre-ordered MCUs · SOT-23-5
TC74A4-3.3VCTTR from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection; the pin is not connected inside the device. |
| 2 | GND | power_in | System ground and the ground return for all TC74 functions. |
| 3 | VDD | power_in | Power supply input with a range of 2.7V to 5.5V; accuracy is specified at the nominal 3.3V for this part and degrades 1°C/V as VDD varies from nominal. |
| 4 | SCLK | input | SMBus/I2C serial clock input that clocks data into and out of the TC74; logic input high is 0.8 x VDD minimum and logic input low is 0.2 x VDD maximum. |
| 5 | SDA | bidirectional | Bidirectional SMBus/I2C serial data pin; SDA output low is 0.4V maximum at IOL = 3 mA (0.6V maximum at IOL = 6 mA). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power-on Reset Threshold | VPOR | 1.2 | 2.2 | V | VDD Falling Edge or Rising Edge | 2 | |
| Supply Voltage | VDD | 2.7 | 5.5 | V | Note 5 | 2 | |
| Operating Current | IDD | 200 | 350 | µA | VDD = 5.5V, Note 1 | 2 | |
| Standby Supply Current | IDD-STANDBY | 5 | 10 | µA | VDD = 3.3V; Serial Port Inactive, Note 4 | 2 | |
| Temperature Accuracy (+25°C to +85°C) | TERR | -2 | 2 | °C | +25°C < TA < +85°C | 2 | |
| Temperature Accuracy (0°C to +125°C) | TERR | -3 | 3 | °C | 0°C < TA < +125°C | 2 | |
| Conversion Rate | CR | 4 | 8 | SPS | Note 2 | 2 | |
| Logic Input High | VIH | 0.8 | x VDD | 2 | |||
| Logic Input Low | VIL | 0.2 | x VDD | 2 | |||
| SDA Output Low | VOL | 0.4 | V | IOL = 3 mA | 2 | ||
| SDA Output Low | VOL | 0.6 | V | IOL = 6 mA, Note 3 | 2 | ||
| I/O Leakage | ILEAK | -1 | 0.1 | 1 | µA | 2 | |
| SMBus/I2C Clock Frequency | fSMB | 10 | 100 | kHz | 2 | ||
| Low Clock Period | tLOW | 4.7 | µsec | 10% to 10% | 2 | ||
| High Clock Period | tHIGH | 4 | µsec | 90% to 90% | 2 | ||
| SMBus/I2C Rise Time | tR | 1000 | nsec | 10% to 90% | 2 | ||
| SMBus/I2C Fall Time | tF | 300 | nsec | 90% to10% | 2 | ||
| START Condition Setup Time (repeated START) | tSU(START) | 4 | µsec | 90% SCLK to 10% SDA | 3 | ||
| START Condition Hold Time | tH(START) | 4 | µsec | 3 | |||
| Data In Setup Time | tSU-DATA | 1000 | nsec | 3 | |||
| Data In Hold Time | tH-DAT | 1250 | nsec | 3 | |||
| STOP Condition Setup Time | tSU(STOP) | 4 | µsec | 3 | |||
| Bus Free Time Prior to New Transition | tIDLE | 4.7 | µsec | 3 | |||
| Supply Voltage (absolute maximum) | VDD | 6 | V | 2 | |||
| Voltage On Any Pin (minimum, referenced to GND) | -0.3 | V | (GND, 0.3V) to (VDD + 0.3V), referenced to GND | 2 | |||
| Voltage On Any Pin (maximum, referenced to VDD) | 0.3 | V | (GND, 0.3V) to (VDD + 0.3V), +0.3V above VDD | 2 | |||
| Current On Any Pin | -50 | 50 | mA | 2 | |||
| Operating Temperature | TA | -40 | 125 | °C | 2 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
TC74A4-3.3VCTTR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated on the KiCad land (body 1.65 x 2.8 mm, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tc74a4-3-3vcttr-etched.step/tc74a4-3-3vcttr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc74a4-3-3vcttr.step/tc74a4-3-3vcttr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (18 pp, sha256
7672fa6ff96f44cb, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).