main
History Download
Ray Publish 0.1.0 81a358e

TC648VOA713

Microchip Tech · Motor Driver ICs · SOIC-8

TC648VOA713 from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Analog input for the thermistor network or other temperature sensor; 1.25V to 2.65V (typical) drives 0% to 100% PWM duty cycle on VOUT, and a logic low forces shutdown mode.
2 CF passive Analog output that is the positive terminal for the PWM ramp generator timing capacitor; 1 µF is recommended for 30 Hz PWM operation.
3 VAS input Analog input where an external resistor divider sets the auto-shutdown threshold (auto-shutdown when VIN < VAS, restart at VIN > VAS + VHAS); ground it if auto-shutdown is not used.
4 GND power_in Ground terminal.
5 NC unconnected No internal connection.
6 OTF output Open-collector digital output that goes low to indicate an over-temperature condition when VIN > VOTF; non-latching and inactive in shutdown mode.
7 VOUT output Active-high complementary PWM output with asymmetrical drive that drives the base of an external NPN transistor (via a base resistor) or the gate of an N-channel MOSFET.
8 VDD power_in Power supply input, 3.0V to 5.5V, which may be independent of the fan's power supply.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 3 5.5 V 3
Supply Current, Operating IDD 0.5 1 mA Pins 6, 7 Open, CF = 1 µF, VIN = VC(MAX) 3
VIN, VAS Input Leakage IIN -1 1 µA Note 1 3
VOUT Rise Time tR 50 µsec IOH = 5 mA, Note 1 3
VOUT Fall Time tF 50 µsec IOL = 1 mA, Note 1 3
Sink Current at VOUT Output IOL 1 mA VOL = 10% of VDD 3
Source Current at VOUT Output IOH 5 mA VOH = 80% of VDD 3
SENSE Input Threshold Voltage with Respect to GND VTH(SENSE) 50 70 90 mV Note 1 3
OTF Output Low Voltage VOL 0.3 V IOL = 2.5 mA 3
Voltage at VIN for 100% Duty Cycle and Overtemp. Fault VC(MAX),VOTF 2.5 2.65 2.8 V 3
VC(MAX) - VC(MIN) VC(SPAN) 1.3 1.4 1.5 V 3
Voltage Applied to VIN to Ensure Reset/Shutdown VSHDN 0.13 xVDD printed as VDD x 0.13 V 3
Voltage Applied to VIN to Release Reset Mode VREL 0.19 xVDD VDD = 5V; printed as VDD x 0.19 V 3
PWM Frequency FOSC 26 30 34 Hz CF = 1.0 µF 4
Supply Voltage (absolute maximum) 6 V 3
Storage Temperature Range -65 150 °C 3
Specified Temperature Range -40 125 °C 3
Supply Current, Shutdown/Auto-shutdown Mode IDD(SHDN) 25 µA Pins 6, 7 Open; Note 1; CF = 1 µF, VIN = 0.35V 3
Hysteresis on VSHDN, VREL VHYST 0.01 xVDD printed as 0.01 x VDD 3
Hysteresis on Auto-shutdown Comparator VHAS 70 mV 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin 8-Lead Plastic Small Outline (SN), Narrow, 150 mil (SOIC) Foot Angle f 048048 19

CAD (KiCad official)

  • Symbol: TC648VOA713
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tc648voa713-etched.step / tc648voa713-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc648voa713.step / tc648voa713.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (28 pp, sha256 16984572c60fe6b4, retrieved 2026-10-27, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF