main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tc4432coa: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tc4432coa-etched.glb Publish 0.1.0 · Ray
tc4432coa-etched.step tc4432coa: factory component page (tier=mfr) · Ray
tc4432coa-hero.glb tc4432coa: hero GLB from the etched model (keeps the MPN mark) · Ray
tc4432coa-hero.overlay.json Publish 0.1.0 · Ray
tc4432coa.glb Publish 0.1.0 · Ray
tc4432coa.kicad_mod Publish 0.1.0 · Ray
tc4432coa.kicad_sym Publish 0.1.0 · Ray
tc4432coa.lbr Publish 0.1.0 · Ray
tc4432coa.step Publish 0.1.0 · Ray

TC4432COA

Microchip Tech · Gate Drive ICs · SOIC-8

TC4432COA from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Bias supply input for the MOSFET driver, rated 4.5V to 30V with respect to the ground pins, and should be bypassed to ground with a local ceramic capacitor.
2 IN input TTL/CMOS compatible control input with 250 mV of hysteresis between the high and low thresholds; a series current-limiting resistor is recommended if the input exceeds 12V.
3 LOCK DIS input Enables or disables the undervoltage lockout: leave floating for lockout (output enabled at 8.4V typical on rising edge, disabled at 7.7V typical on falling edge), or tie to ground for operation below 7V.
4 GND power_in Ground return path for the bias current and high peak load discharge currents; both ground pins should be used and tied to a ground plane or short traces.
5 GND power_in Ground return path for the bias current and high peak load discharge currents; both ground pins should be used and tied to a ground plane or short traces.
6 OUT output Drive output, pull down (sink): can sink 1.5 A peak currents from a capacitive load.
7 OUT output Drive output, pull up (source): can source 3 A peak currents into capacitive loads.
8 VDD power_in Bias supply input for the MOSFET driver, rated 4.5V to 30V with respect to the ground pins, and should be bypassed to ground with a local ceramic capacitor.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Logic '1' High Input Voltage VIH 2.4 V 3
Logic '0' Low Input Voltage VIL 0.8 V 3
Input Current IIN -1 1 µA 0V ≤ VIN ≤ 12V 3
Low Output Voltage VOL 0.025 V 3
Output Resistance RO 7 10 Ω IOUT = 10 mA, VDD = 30V 3
Rise Time tR 25 40 ns Figure 4-1 3
Fall Time tF 33 50 ns Figure 4-1 3
Delay Time tD1 tD1 62 80 ns Figure 4-1 3
Delay Time tD2 tD2 78 90 ns Figure 4-1 3
Power Supply Current IS 2.5 4 mA VIN = 3V 3
Power Supply Current IS 0.3 0.4 mA VIN = 0V 3
Start-up Threshold VS 8.4 10 V 3
Drop-out Threshold VDO 7 7.7 V Note 3 3
Logic '1' High Input Voltage VIH 2.4 V Over operating temperature range 4
Logic '0' Low Input Voltage VIL 0.8 V Over operating temperature range 4
Input Current IIN -10 10 µA 0V ≤ VIN ≤ 12V 4
Low Output Voltage VOL 0.025 V Over operating temperature range 4
Output Resistance RO 12 Ω IOUT = 10 mA, VDD = 30V 4
Rise Time tR 60 ns Figure 4-1 4
Fall Time tF 70 ns Figure 4-1 4
Delay Time tD1 tD1 100 ns Figure 4-1 4
Delay Time tD2 tD2 110 ns Figure 4-1 4
Power Supply Current IS 6 mA VIN = 3V, over operating temperature range 4
Power Supply Current IS 0.7 mA VIN = 0V, over operating temperature range 4
Start-up Threshold VS 8.4 10 V Over operating temperature range 4
Drop-out Threshold VDO 7 7.7 V Note 3, over operating temperature range 4
Maximum Junction Temperature TJ 150 °C 3
Storage Temperature Range TA -65 150 °C 3
Specified Temperature Range (C) TA 0 70 ºC Commercial grade C (TC4432COA) 4
Supply Voltage (VDD) operating range VDD 4.5 30 V 3
Thermal Resistance, 8L-SOIC θJA 155 ºC/W 4
Peak Output Current (source) IPK 3 A Source: VDD = 30V 3
Peak Output Current (sink) IPK 1.5 A Sink: VDD = 30V 3
Latch-Up Withstand Reverse Current IREV 0.3 A Duty cycle ≤ 2%, t ≤ 300 µsec 3

CAD (KiCad official)

  • Symbol: TC4432COA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: tc4432coa-etched.step / tc4432coa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc4432coa.step / tc4432coa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (18 pp, sha256 2a6e62628b47c4fb, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF