component
TC2466A
Public Made by Adomby adom
Shenzhen Fuman Brushed DC Motor Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTC2466A
Shenzhen Fuman · Brushed DC Motor Drivers · SOP-8
TC2466A from Shenzhen Fuman, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VM | power_in | Motor power supply, which operates from 2 V to 11 V (absolute maximum 11 V). |
| 2 | OUTA | output | Motor drive output A; the maximum continuous output current is 1.4 A on SOP-8 and 1.8 A on ESOP-8, depending on heat dissipation. |
| 3 | OUTB | output | Motor drive output B; the maximum continuous output current is 1.4 A on SOP-8 and 1.8 A on ESOP-8, depending on heat dissipation. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | INB | input | Logic input B for PWM control; the recommended input voltage range is 0 V to 6 V. |
| 6 | INA | input | Logic input A for PWM control; the recommended input voltage range is 0 V to 6 V. |
| 7 | SLP | input | Sleep mode control: SLP=VCC enables the outputs and SLP=GND disables them (sleep mode); high input is 2 V to 6 V and low input is at most 0.8 V. |
| 8 | VCC | power_in | Logic power supply, which operates from 2.0 V to 6 V (absolute maximum 7 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Fuman |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic power supply voltage | VCC | 7 | V | 2 | |||
| Motor power supply voltage | VM | 11 | V | 2 | |||
| Operating Temperature | Topr | -20 | 85 | ℃ | 2 | ||
| Junction temperature | Tj | 150 | ℃ | 2 | |||
| Storage Temperature | TSTG | -55 | 150 | ℃ | 3 | ||
| Manual welding temperature | 350 | 370 | ℃ | 3 | |||
| Peak output current | IOP | 3.5 | A | 3 | |||
| Continuous Output Current (ESOP-8 package) | IOC | 1.8 | A | ESOP-8 package; depends on heat dissipation | 3 | ||
| Continuous Output Current (SOP-8 package) | IOC | 1.4 | A | SOP-8 package; depends on heat dissipation | 3 | ||
| PWM Frequency | FPWM | 40 | KHz | 3 | |||
| Power supply voltage | VCC | 2 | 6 | V | Ta=25℃ | 3 | |
| Motor Power supply voltage | VM | 9.6 | V | Ta=25℃; single value printed in table | 3 | ||
| High Input Voltage | VIN | 0 | 6 | V | Ta=25℃ | 3 | |
| Low Input Voltage | VIN | -0.8 | 0 | V | Ta=25℃ | 3 | |
| Continuous Output Current | IOUT | -1400 | 1400 | mA | Ta=25℃; depends on heat dissipation | 3 | |
| Standby Current | ICCST | 1 | 2 | uA | Ta=25℃, VCC=3V, VM=6V; INA=INB=GND, SLP=GND | 3 | |
| High Input Voltage | VINH | 2 | 4 | 6 | V | Ta=25℃, VCC=3V, VM=6V; VSLP | 3 |
| Low Input Voltage | VINL | 0.8 | V | Ta=25℃, VCC=3V, VM=6V; VSLP | 3 | ||
| High Input Current | IINH | 250 | 400 | uA | Ta=25℃, VCC=3V, VM=6V; ISLP, VIN=3V | 3 | |
| Low Input Current | IINL | -1 | 0 | uA | Ta=25℃, VCC=3V, VM=6V; ISLP, VIN=0V | 3 | |
| Output Impedance (HS+LS) | RON | 0.5 | 0.6 | Ω | Ta=25℃, VCC=3V, VM=6V; Io=±200mA | 3 | |
| Pull Down Resistor | RIN | 500 | KΩ | Ta=25℃, VCC=3V, VM=6V; RSLP | 3 | ||
| Thermal shutdown temperature | TTSD | 150 | ℃ | Die temperature | 4 |
CAD (KiCad official)
- Symbol:
TC2466A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
tc2466a-etched.step/tc2466a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tc2466a.step/tc2466a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen Fuman datasheet (7 pp, sha256
42f8cfbe6671e95d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).