component

TC233A

Public Made by Adom

by adom

Shenzhen Fuman Touch Sensors, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentsensortc233a
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TC233A

Shenzhen Fuman · Touch Sensors · SOT-23-6

TC233A from Shenzhen Fuman, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Trigger drive output. Open-drain, active-low; requires external pull-up (typ. 10 kΩ) if internal pull-up is not used. Sink current typ. 26 mA at VDD=4V.
2 GND power_in Ground / power negative terminal.
3 TCH input Touch sensing input pin. Connects to the touch pad through a series resistor (R2, 0-5 kΩ, typ. 1 kΩ) with an optional sensitivity-trim cap (C2, 0-47 pF) to GND.
4 LHO input Output polarity select. Tie to VDD for active-low OUT operation (as described by the datasheet).
5 VDD power_in Positive supply. Operating range 2.3V-5.5V (typ. 3V). Decouple with 100 nF (C1) close to the pin.
6 OHO input Output mode select (One-shot or Hold). Tie to VDD for Hold mode (OUT stays asserted while touched); tie to GND for synchronous / one-shot mode (OUT tracks touch with a 16 s max active-time watchdog).

Key specifications

Parameter Value
Manufacturer Shenzhen Fuman
Package SOT-23-6
Category Sensor
Pins 6

CAD (KiCad official)

  • Symbol: TC233A
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: tc233a-etched.step / tc233a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc233a.step / tc233a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shenzhen Fuman datasheet (4 pp, sha256 aa22b7ed6928a34d, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF