main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs tc1055-2-5vct713: hero re-rendered with the chip (after the 10-30 render outage) · Ray
viewers tc1055-2-5vct713: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
tc1055-2-5vct713-etched.glb Publish 0.1.0 · Ray
tc1055-2-5vct713-etched.step tc1055-2-5vct713: factory component page (tier=mfr) · Ray
tc1055-2-5vct713-hero.glb tc1055-2-5vct713: hero GLB from the etched model (keeps the MPN mark) · Ray
tc1055-2-5vct713-hero.overlay.json Publish 0.1.0 · Ray
tc1055-2-5vct713.glb Publish 0.1.0 · Ray
tc1055-2-5vct713.kicad_mod Publish 0.1.0 · Ray
tc1055-2-5vct713.kicad_sym Publish 0.1.0 · Ray
tc1055-2-5vct713.lbr Publish 0.1.0 · Ray
tc1055-2-5vct713.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

TC1055-2.5VCT713

Microchip Tech · Linear Voltage Regulators (LDO) · SOT-23-5

TC1055-2.5VCT713 from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Unregulated supply input, with a 1 µF capacitor from VIN to ground recommended for most applications and an input operating voltage of 2.7 V to 6.50 V.
2 GND power_in Ground terminal, to which the unregulated input supply return and the negative side of the input and output capacitors should be connected close to the pin.
3 SHDN input Shutdown control input where a logic-high enables the regulator and a logic-low (at or below 15% of VIN) shuts it down, with supply current reduced to 0.5 µA maximum and VOUT and ERROR disabled.
4 ERROR output Out-of-regulation flag, an open-drain output that goes low when VOUT is about 5% out of tolerance, with output logic low voltage of 400 mV maximum at 1 mA.
5 VOUT power_out Regulated voltage output, to which the load and the positive side of the output capacitor (1 µF minimum) should be connected as close as possible to the pin.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 2.7 6.5 V Note 8 2
Maximum Output Current (TC1055) IOUTMAX 100 mA TC1055 2
Output Voltage (VR -2.5% to VR +2.5%; VR = 2.5 V for this part; typ VR +/-0.5%) VOUT -2.5 0.5 2.5 % Note 1 2
Line Regulation VOUT/VIN 0.05 0.35 % (VR + 1V) <= VIN <= 6V 2
Load Regulation (TC1054; TC1055) VOUT/VOUT 0.5 2 % Note 3; IL = 0.1 mA to IOUTMAX 2
Dropout Voltage (TC1055; TC1186) VIN-VOUT 180 250 mV IL = 100 mA 3
Supply Current IIN 50 80 uA SHDN = VIH, IL = 0 uA (Note 9) 3
Shutdown Supply Current IINSD 0.05 0.5 uA SHDN = 0V 3
Output Short Circuit Current IOUTSC 300 450 mA VOUT = 0V 3
SHDN Input High Threshold VIH 45 %VIN VIN = 2.5V to 6.5V 3
SHDN Input Low Threshold VIL 15 %VIN VIN = 2.5V to 6.5V 3
ERROR Minimum VIN Operating Voltage VINMIN 1 V 3
Output Logic Low Voltage (ERROR) VOL 400 mV 1 mA Flows to ERROR 3
Thermal Resistance, Junction-to-Air (5-Pin SOT-23) θJA 220 °C/W 5-Pin SOT-23 package, approximately 10
Output Voltage (Absolute Maximum) VOUT -0.3 V Upper limit (VIN + 0.3V) 2
Maximum Voltage on Any Pin -0.3 V Upper limit VIN + 0.3V 2
Operating Junction Temperature Range TJ -40 125 °C Absolute Maximum Ratings section 2
Storage Temperature -65 150 °C 2

CAD (KiCad official)

  • Symbol: TC1055-2.5VCT713
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tc1055-2-5vct713-etched.step / tc1055-2-5vct713-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tc1055-2-5vct713.step / tc1055-2-5vct713.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (20 pp, sha256 0fc763bc1b9d4024, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF