main
Ray
Publish 0.1.0
839c9a0
TBD62083AFWG
TOSHIBA · Darlington Transistor Arrays · SOP-18-300mil
TBD62083AFWG from TOSHIBA, in a SOP-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I1 | input | Input pin for channel 1; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 2 | I2 | input | Input pin for channel 2; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 3 | I3 | input | Input pin for channel 3; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 4 | I4 | input | Input pin for channel 4; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 5 | I5 | input | Input pin for channel 5; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 6 | I6 | input | Input pin for channel 6; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 7 | I7 | input | Input pin for channel 7; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 8 | I8 | input | Input pin for channel 8; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 9 | GND | power_in | Ground pin for the driver array, which must be routed carefully because the IC has no built-in protection against improper grounding or short circuits. |
| 10 | COMMON | passive | Common pin for the clamp diodes of the outputs, with a rated voltage of 0 to 50 V in operation and an absolute maximum of −0.5 to 50 V. |
| 11 | O8 | output | Sink output of channel 8, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 12 | O7 | output | Sink output of channel 7, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 13 | O6 | output | Sink output of channel 6, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 14 | O5 | output | Sink output of channel 5, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 15 | O4 | output | Sink output of channel 4, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 16 | O3 | output | Sink output of channel 3, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 17 | O2 | output | Sink output of channel 2, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 18 | O1 | output | Sink output of channel 1, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | SOP-18-300mil |
| Category | Transistors |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 50 | V | 4 | |||
| COMMON pin voltage | VCOM | 0 | 50 | V | 4 | ||
| Output current (FWG, 1 circuit ON) | IOUT | 0 | 400 | mA/ch | FWG (Note 3): 1 circuits ON, Ta = 25°C, tpw = 25 ms | 4 | |
| Output current (FWG, 8 circuits ON, Duty 10%) | IOUT | 0 | 370 | mA/ch | FWG (Note 3): 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 4 | |
| Output current (FWG, 8 circuits ON, Duty 50%) | IOUT | 0 | 160 | mA/ch | FWG (Note 3): 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 4 | |
| Input voltage (output on), TBD62083A series | VIN (ON) | 2.5 | 25 | V | IOUT = 100 mA or upper, VOUT = 2 V | 4 | |
| Input voltage (output off), TBD62083A series | VIN (OFF) | 0 | 0.6 | V | IOUT = 100 μA or less, VOUT = 2 V | 4 | |
| Clamp diode forward current | IF | 400 | mA | 4 | |||
| Output voltage | VOUT | 50 | V | Ta = 25°C | 3 | ||
| COMMON pin voltage | VCOM | -0.5 | 50 | V | Ta = 25°C | 3 | |
| Output current | IOUT | 500 | mA/ch | Ta = 25°C | 3 | ||
| Input voltage | VIN | -0.5 | 30 | V | Ta = 25°C | 3 | |
| Clamp diode reverse voltage | VR | 50 | V | Ta = 25°C | 3 | ||
| Clamp diode forward current | IF | 500 | mA | Ta = 25°C | 3 | ||
| Power dissipation (FWG) | PD | 1.31 | W | Ta = 25°C; FWG on PCB 75 mm × 114 mm × 1.6 mm, Cu area 20% (Note 4) | 3 | ||
| Operating temperature | Topr | -40 | 85 | °C | 3 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Output leakage current | Ileak | 1 | μA | VOUT = 50 V, Ta = 85°C, VIN = 0 V | 5 | ||
| Output voltage (output ON) at 350 mA, TBD62083A series | VDS (RON) | 0.7 | 1.14 | V | IOUT = 350 mA, VIN = 5.0 V | 5 | |
| Output voltage (output ON) at 200 mA, TBD62083A series | VDS (RON) | 0.4 | 0.65 | V | IOUT = 200 mA, VIN = 5.0 V | 5 | |
| Output voltage (output ON) at 100 mA, TBD62083A series | VDS (RON) | 0.2 | 0.325 | V | IOUT = 100 mA, VIN = 5.0 V | 5 | |
| Output ON-resistance at 350 mA, TBD62083A series | RON | 2 | 3.25 | Ω | IOUT = 350 mA, VIN = 5.0 V | 5 | |
| Output ON-resistance at 200 mA, TBD62083A series | RON | 2 | 3.25 | Ω | IOUT = 200 mA, VIN = 5.0 V | 5 | |
| Output ON-resistance at 100 mA, TBD62083A series | RON | 2 | 3.25 | Ω | IOUT = 100 mA, VIN = 5.0 V | 5 | |
| Input current (output on), TBD62083A series | IIN (ON) | 0.1 | mA | VIN = 2.5 V | 5 | ||
| Input current (output off) | IIN (OFF) | 1 | μA | VIN = 0 V, Ta = 85°C | 5 | ||
| Input voltage (output on), TBD62083A series | VIN (ON) | 2.5 | V | IOUT = 100 mA, VOUT = 2 V | 5 | ||
| Clamp diode reverse current | IR | 1 | μA | VR = 50 V, Ta = 85°C | 5 | ||
| Clamp diode forward voltage | VF | 2 | V | IF = 350 mA | 5 |
CAD (KiCad official)
- Symbol:
TBD62083AFWG - Footprint:
Package_SO:SOP-18_7.495x11.515mm_P1.27mm - 3D model: SOP-18-300mil, generated on the KiCad land (body 7.495 x 11.515 mm, terminals on the pads, 2.65 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
tbd62083afwg-z-etched.step/tbd62083afwg-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tbd62083afwg-z.step/tbd62083afwg-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TOSHIBA datasheet (11 pp, sha256
43a9a6e87c350831, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TBD62083AFWG
**TOSHIBA** · Darlington Transistor Arrays · SOP-18-300mil
TBD62083AFWG from TOSHIBA, in a SOP-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I1 | input | Input pin for channel 1; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 2 | I2 | input | Input pin for channel 2; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 3 | I3 | input | Input pin for channel 3; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 4 | I4 | input | Input pin for channel 4; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 5 | I5 | input | Input pin for channel 5; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 6 | I6 | input | Input pin for channel 6; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 7 | I7 | input | Input pin for channel 7; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 8 | I8 | input | Input pin for channel 8; for the TBD62083A series VIN(ON) must be at least 2.5 V and VIN(OFF) at most 0.6 V, with absolute input voltage rated −0.5 to 30 V. |
| 9 | GND | power_in | Ground pin for the driver array, which must be routed carefully because the IC has no built-in protection against improper grounding or short circuits. |
| 10 | COMMON | passive | Common pin for the clamp diodes of the outputs, with a rated voltage of 0 to 50 V in operation and an absolute maximum of −0.5 to 50 V. |
| 11 | O8 | output | Sink output of channel 8, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 12 | O7 | output | Sink output of channel 7, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 13 | O6 | output | Sink output of channel 6, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 14 | O5 | output | Sink output of channel 5, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 15 | O4 | output | Sink output of channel 4, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 16 | O3 | output | Sink output of channel 3, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 17 | O2 | output | Sink output of channel 2, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
| 18 | O1 | output | Sink output of channel 1, rated VOUT 50 V maximum and IOUT 500 mA per channel maximum, with an internal clamp diode for inductive loads. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | SOP-18-300mil |
| Category | Transistors |
| Pins | 18 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | | | 50 | V | | 4 |
| COMMON pin voltage | VCOM | 0 | | 50 | V | | 4 |
| Output current (FWG, 1 circuit ON) | IOUT | 0 | | 400 | mA/ch | FWG (Note 3): 1 circuits ON, Ta = 25°C, tpw = 25 ms | 4 |
| Output current (FWG, 8 circuits ON, Duty 10%) | IOUT | 0 | | 370 | mA/ch | FWG (Note 3): 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 10% | 4 |
| Output current (FWG, 8 circuits ON, Duty 50%) | IOUT | 0 | | 160 | mA/ch | FWG (Note 3): 8 circuits ON, Ta = 85°C, Tj = 120°C, Duty = 50% | 4 |
| Input voltage (output on), TBD62083A series | VIN (ON) | 2.5 | | 25 | V | IOUT = 100 mA or upper, VOUT = 2 V | 4 |
| Input voltage (output off), TBD62083A series | VIN (OFF) | 0 | | 0.6 | V | IOUT = 100 μA or less, VOUT = 2 V | 4 |
| Clamp diode forward current | IF | | | 400 | mA | | 4 |
| Output voltage | VOUT | | | 50 | V | Ta = 25°C | 3 |
| COMMON pin voltage | VCOM | -0.5 | | 50 | V | Ta = 25°C | 3 |
| Output current | IOUT | | | 500 | mA/ch | Ta = 25°C | 3 |
| Input voltage | VIN | -0.5 | | 30 | V | Ta = 25°C | 3 |
| Clamp diode reverse voltage | VR | | | 50 | V | Ta = 25°C | 3 |
| Clamp diode forward current | IF | | | 500 | mA | Ta = 25°C | 3 |
| Power dissipation (FWG) | PD | | | 1.31 | W | Ta = 25°C; FWG on PCB 75 mm × 114 mm × 1.6 mm, Cu area 20% (Note 4) | 3 |
| Operating temperature | Topr | -40 | | 85 | °C | | 3 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 3 |
| Output leakage current | Ileak | | | 1 | μA | VOUT = 50 V, Ta = 85°C, VIN = 0 V | 5 |
| Output voltage (output ON) at 350 mA, TBD62083A series | VDS (RON) | | 0.7 | 1.14 | V | IOUT = 350 mA, VIN = 5.0 V | 5 |
| Output voltage (output ON) at 200 mA, TBD62083A series | VDS (RON) | | 0.4 | 0.65 | V | IOUT = 200 mA, VIN = 5.0 V | 5 |
| Output voltage (output ON) at 100 mA, TBD62083A series | VDS (RON) | | 0.2 | 0.325 | V | IOUT = 100 mA, VIN = 5.0 V | 5 |
| Output ON-resistance at 350 mA, TBD62083A series | RON | | 2 | 3.25 | Ω | IOUT = 350 mA, VIN = 5.0 V | 5 |
| Output ON-resistance at 200 mA, TBD62083A series | RON | | 2 | 3.25 | Ω | IOUT = 200 mA, VIN = 5.0 V | 5 |
| Output ON-resistance at 100 mA, TBD62083A series | RON | | 2 | 3.25 | Ω | IOUT = 100 mA, VIN = 5.0 V | 5 |
| Input current (output on), TBD62083A series | IIN (ON) | | | 0.1 | mA | VIN = 2.5 V | 5 |
| Input current (output off) | IIN (OFF) | | | 1 | μA | VIN = 0 V, Ta = 85°C | 5 |
| Input voltage (output on), TBD62083A series | VIN (ON) | | | 2.5 | V | IOUT = 100 mA, VOUT = 2 V | 5 |
| Clamp diode reverse current | IR | | | 1 | μA | VR = 50 V, Ta = 85°C | 5 |
| Clamp diode forward voltage | VF | | | 2 | V | IF = 350 mA | 5 |
## CAD (KiCad official)
- Symbol: `TBD62083AFWG`
- Footprint: `Package_SO:SOP-18_7.495x11.515mm_P1.27mm`
- 3D model: SOP-18-300mil, generated on the KiCad land (body 7.495 x 11.515 mm, terminals on the pads, 2.65 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `tbd62083afwg-z-etched.step` / `tbd62083afwg-z-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tbd62083afwg-z.step` / `tbd62083afwg-z.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [TOSHIBA datasheet](docs/tbd62083afwg-z-datasheet.pdf) (11 pp, sha256 `43a9a6e87c350831`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tbd62083afwg-z-datasheet.pdf)