component
TB10S
Public Made by Adomby adom
Shikues Bridge Rectifiers, ABS. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
TB10S
Shikues · Bridge Rectifiers · ABS
TB10S from Shikues, in a ABS. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output Cathode (-) | power_out | Negative DC output terminal of the bridge rectifier; the datasheet gives an average rectified output current of 0.8 A at Ta = 40 °C for the device. |
| 2 | Output Anode (+) | power_out | Positive DC output terminal of the bridge rectifier, rated for 0.8 A average rectified output current at Ta = 40 °C. |
| 3 | Input Pin (~) | input | AC input terminal of the bridge rectifier, rated for a maximum repetitive peak reverse voltage of 1000 V for the TB10S. |
| 4 | Input Pin (~) | input | AC input terminal of the bridge rectifier, rated for a maximum repetitive peak reverse voltage of 1000 V for the TB10S. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shikues |
| Package | ABS |
| Category | Diodes |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage | VRRM | 1000 | V | 1 | |||
| Maximum DC Blocking Voltage | VDC | 1000 | V | 1 | |||
| Maximum RMS Voltage | VRMS | 700 | V | 1 | |||
| Average Rectified Output Current | IO | 0.8 | A | at Ta = 40 °C | 1 | ||
| Peak Forward Surge Current | IFSM | 25 | A | 8.3 ms single half sine wave superimposed on rated load (JEDEC method) | 1 | ||
| Operating and Storage Temperature Range | Tj, Tstg | -55 | 150 | °C | 1 | ||
| Forward Voltage per element | VF | 1.1 | V | @IF = 0.4A, per element | 1 | ||
| Forward Voltage per element | VF | 1 | V | @IF = 0.8A, per element | 1 | ||
| Maximum DC Reverse Current at Rated DC Blocking Voltage | IR | 5 | μA | @TA = 25 °C | 1 | ||
| Maximum DC Reverse Current at Rated DC Blocking Voltage | IR | 100 | μA | @TA = 100 °C | 1 | ||
| Maximum DC Reverse Current at Rated DC Blocking Voltage | IR | 500 | μA | @TA = 125 °C | 1 | ||
| Typical Junction Capacitance | Cj | 13 | pF | Measured at 1MHz and applied reverse voltage of 4 V D.C. (Note 1) | 1 | ||
| Typical Thermal Resistance, junction to ambient | RθJA | 80 | °C/W | Mounted on glass epoxy PC board with 1.3mm² copper pad (Note 2) | 1 | ||
| Typical Thermal Resistance, junction to lead | RθJL | 16 | °C/W | Mounted on glass epoxy PC board with 1.3mm² copper pad (Note 2) | 1 |
CAD (KiCad official)
- Symbol:
TB10S - Footprint:
Diode_SMD:Diode_Bridge_Diotec_ABS - 3D model: ABS (KiCad packages3D, STEP)
- 3D model files:
tb10s-etched.step/tb10s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tb10s.step/tb10s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shikues datasheet (3 pp, sha256
9eb6e8c94f7a33f5, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# TB10S
**Shikues** · Bridge Rectifiers · ABS
TB10S from Shikues, in a ABS. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output Cathode (-) | power_out | Negative DC output terminal of the bridge rectifier; the datasheet gives an average rectified output current of 0.8 A at Ta = 40 °C for the device. |
| 2 | Output Anode (+) | power_out | Positive DC output terminal of the bridge rectifier, rated for 0.8 A average rectified output current at Ta = 40 °C. |
| 3 | Input Pin (~) | input | AC input terminal of the bridge rectifier, rated for a maximum repetitive peak reverse voltage of 1000 V for the TB10S. |
| 4 | Input Pin (~) | input | AC input terminal of the bridge rectifier, rated for a maximum repetitive peak reverse voltage of 1000 V for the TB10S. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shikues |
| Package | ABS |
| Category | Diodes |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum Repetitive Peak Reverse Voltage | VRRM | | | 1000 | V | | 1 |
| Maximum DC Blocking Voltage | VDC | | | 1000 | V | | 1 |
| Maximum RMS Voltage | VRMS | | | 700 | V | | 1 |
| Average Rectified Output Current | IO | | | 0.8 | A | at Ta = 40 °C | 1 |
| Peak Forward Surge Current | IFSM | | | 25 | A | 8.3 ms single half sine wave superimposed on rated load (JEDEC method) | 1 |
| Operating and Storage Temperature Range | Tj, Tstg | -55 | | 150 | °C | | 1 |
| Forward Voltage per element | VF | | | 1.1 | V | @IF = 0.4A, per element | 1 |
| Forward Voltage per element | VF | | | 1 | V | @IF = 0.8A, per element | 1 |
| Maximum DC Reverse Current at Rated DC Blocking Voltage | IR | | | 5 | μA | @TA = 25 °C | 1 |
| Maximum DC Reverse Current at Rated DC Blocking Voltage | IR | | | 100 | μA | @TA = 100 °C | 1 |
| Maximum DC Reverse Current at Rated DC Blocking Voltage | IR | | | 500 | μA | @TA = 125 °C | 1 |
| Typical Junction Capacitance | Cj | | 13 | | pF | Measured at 1MHz and applied reverse voltage of 4 V D.C. (Note 1) | 1 |
| Typical Thermal Resistance, junction to ambient | RθJA | | 80 | | °C/W | Mounted on glass epoxy PC board with 1.3mm² copper pad (Note 2) | 1 |
| Typical Thermal Resistance, junction to lead | RθJL | | 16 | | °C/W | Mounted on glass epoxy PC board with 1.3mm² copper pad (Note 2) | 1 |
## CAD (KiCad official)
- Symbol: `TB10S`
- Footprint: `Diode_SMD:Diode_Bridge_Diotec_ABS`
- 3D model: ABS (KiCad packages3D, STEP)
- 3D model files: `tb10s-etched.step` / `tb10s-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tb10s.step` / `tb10s.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Shikues datasheet](docs/tb10s-datasheet.pdf) (3 pp, sha256 `9eb6e8c94f7a33f5`, retrieved 2026-10-21, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/tb10s-datasheet.pdf)