← Commit history
tas5731mphpr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+89−9
package.json+47−7@@ -122,7 +122,7 @@ "number": "10", "name": "PLL_FLTM", "type": "output",- "description": "PLL negative loop-filter terminal; connect to external RC network with 47-nF and 4.7-nF capacitors and 470-\u03a9 resistor."+ "description": "PLL negative loop-filter terminal; connect to external RC network with 47-nF and 4.7-nF capacitors and 470-Ω resistor." }, { "number": "11",@@ -158,7 +158,7 @@ "number": "16", "name": "OSC_RES", "type": "output",- "description": "Oscillator trim resistor connection; connect 18.2-k\u03a9 1% resistor to DVSSO for oscillator frequency calibration."+ "description": "Oscillator trim resistor connection; connect 18.2-kΩ 1% resistor to DVSSO for oscillator frequency calibration." }, { "number": "17",@@ -188,7 +188,7 @@ "number": "21", "name": "SCLK", "type": "input",- "description": "I2S serial bit clock input (1.024 to 12.288-MHz at 32\u00d7, 48\u00d7, or 64\u00d7fS) with 5-V tolerance and 8-ns rise/fall time."+ "description": "I2S serial bit clock input (1.024 to 12.288-MHz at 32×, 48×, or 64×fS) with 5-V tolerance and 8-ns rise/fall time." }, { "number": "22",@@ -200,7 +200,7 @@ "number": "23", "name": "SDA", "type": "bidirectional",- "description": "I2C open-drain serial data line with internal pullup; requires external 4.7-k\u03a9 pullup resistor to DVDD."+ "description": "I2C open-drain serial data line with internal pullup; requires external 4.7-kΩ pullup resistor to DVDD." }, { "number": "24",@@ -212,7 +212,7 @@ "number": "25", "name": "RESET", "type": "input",- "description": "Active-low asynchronous reset input with internal pullup; must be held low for 100-\u00b5s minimum at power-up."+ "description": "Active-low asynchronous reset input with internal pullup; must be held low for 100-µs minimum at power-up." }, { "number": "26",@@ -395,6 +395,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tas5731mphpr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9.32,+ 9.32,+ 1.6+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b180586f3ee58503076782c9a1fc7102515fb0ece2d21b2fcfad5a1e2aa3df64",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tas5731mphpr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9.32,+ 9.32,+ 1.6+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a26b78a70c940f5210a0f3459fa156c4ef596d8a0dd125cd3a8d9a0079da62fc",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -380,7 +380,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tas5731mphpr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9.32,+ 9.32,+ 1.6+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b180586f3ee58503076782c9a1fc7102515fb0ece2d21b2fcfad5a1e2aa3df64",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tas5731mphpr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9.32,+ 9.32,+ 1.6+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a26b78a70c940f5210a0f3459fa156c4ef596d8a0dd125cd3a8d9a0079da62fc",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -427,4 +467,4 @@ "visibility": { "public": true }-}+}