main
History Download
Ray Publish 0.1.0 3fe674b

TAS5508CPAGR

Texas Instruments · Audio Interface ICs · TQFP-64(10x10)

TAS5508CPAGR from Texas Instruments, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VRA_PLL power_out Internally regulated 1.8-V PLL analog supply reference; a low-ESR capacitor to AVSS_PLL is required and it must not be used to power external devices.
2 PLL_FLT_RET passive PLL external filter return, connected through an RC network to the PLL filter inputs.
3 PLL_FLTM passive PLL negative input, connected to the PLL filter return via an RC network.
4 PLL_FLTP passive PLL positive input, connected to the PLL filter return via an RC network.
5 AVSS power_in Analog ground.
6 AVSS power_in Analog ground.
7 VRD_PLL power_out Internally regulated 1.8-V PLL digital supply reference; a low-ESR capacitor to AVSS_PLL is required and it must not be used to power external devices.
8 AVSS_PLL power_in Analog ground for the PLL, which should reference the same ground as DVSS with ground noise minimized for low PLL jitter.
9 AVDD_PLL power_in 3.3-V analog power supply for the PLL, to be bypassed to AVSS_PLL with a low-ESR capacitor for low PLL jitter.
10 VBGAP power_out Band-gap voltage reference (internally regulated 1.2 V) with a typical 1-nF low-ESR capacitor to AVSS_PLL; it must not be used to power external devices.
11 RESET input Active-low system reset input with pull-up and 5-V tolerance; a logic low asynchronously restores default conditions, sets VALID low and places the PWM in hard mute.
12 HP_SEL input Headphone/speaker selector input with pull-up and 5-V tolerance; logic low selects the headphone (speakers off) and logic high selects the speakers (headphone off).
13 PDN input Active-low power-down input with pull-up and 5-V tolerance; a logic low powers down all logic and stops all clocks, with a 100-ms recovery time.
14 MUTE input Active-low soft mute input of the outputs with pull-up and 5-V tolerance; logic low mutes the outputs with a noiseless volume ramp.
15 DVDD power_in 3.3-V digital power supply.
16 DVSS power_in Digital ground.
17 VR_DPLL power_out Internally regulated 1.8-V digital PLL supply reference; a low-ESR capacitor to ground is required and it must not be used to power external devices.
18 OSC_CAP passive Oscillator capacitor connection for the crystal oscillator circuit.
19 XTL_OUT output 1.8-V output drive to the external 13.5-MHz fundamental-mode crystal (HCM49 recommended).
20 XTL_IN input 1.8-V oscillator input port for the external 13.5-MHz fundamental-mode crystal (HCM49 recommended); XTL_IN and XTL_OUT are the only LVCMOS terminals on the device.
21 RESERVED passive Reserved terminal; connect to digital ground.
22 RESERVED passive Reserved terminal; connect to digital ground.
23 RESERVED passive Reserved terminal; connect to digital ground.
24 SDA bidirectional I2C serial-control data input/output with 5-V tolerance.
25 SCL bidirectional I2C serial-control clock input/output with 5-V tolerance.
26 LRCLK input Serial-audio left/right clock (sampling-rate clock) input with 5-V tolerance.
27 SCLK input Serial-audio data shift clock input with 5-V tolerance.
28 SDIN4 input Serial-audio data input 4 with pull-down and 5-V tolerance; supports four stereo data formats at up to 64 Fs.
29 SDIN3 input Serial-audio data input 3 with pull-down and 5-V tolerance; supports four stereo data formats at up to 64 Fs.
30 SDIN2 input Serial-audio data input 2 with pull-down and 5-V tolerance; supports four stereo data formats at up to 64 Fs.
31 SDIN1 input Serial-audio data input 1 with pull-down and 5-V tolerance; supports four stereo data formats at up to 64 Fs.
32 PSVC output Power-supply volume control PWM output.
33 VR_DIG power_out Internally regulated 1.8-V digital core supply reference; a 4.7-mF low-ESR capacitor to DVSS is specified and it must not be used to power external devices.
34 DVSS power_in Digital ground.
35 DVSS power_in Digital ground.
36 DVDD power_in 3.3-V digital power supply.
37 BKND_ERR input Active-low back-end error input with pull-up; a logic low for at least 5 MCLK cycles places the PWM outputs in the hard-mute (M) state without changing system parameters.
38 DVSS power_in Digital ground.
39 VALID output Active-high output indicating the validity of the PWM outputs.
40 PWM_M_1 output PWM 1 output (differential negative).
41 PWM_P_1 output PWM 1 output (differential positive).
42 PWM_M_2 output PWM 2 output (differential negative).
43 PWM_P_2 output PWM 2 output (differential positive).
44 PWM_M_3 output PWM 3 output (differential negative).
45 PWM_P_3 output PWM 3 output (differential positive).
46 PWM_M_4 output PWM 4 output (differential negative).
47 PWM_P_4 output PWM 4 output (differential positive).
48 VR_PWM power_out Internally regulated 1.8-V PWM digital core supply reference; a low-ESR capacitor to DVSS_PWM is required and it must not be used to power external devices.
49 PWM_M_7 output PWM 7 (lineout L) output (differential negative).
50 PWM_P_7 output PWM 7 (lineout L) output (differential positive).
51 PWM_M_8 output PWM 8 (lineout R) output (differential negative).
52 PWM_P_8 output PWM 8 (lineout R) output (differential positive).
53 DVSS_PWM power_in Digital ground for the PWM section.
54 DVDD_PWM power_in 3.3-V digital power supply for the PWM section.
55 PWM_M_5 output PWM 5 output (differential negative).
56 PWM_P_5 output PWM 5 output (differential positive).
57 PWM_M_6 output PWM 6 output (differential negative).
58 PWM_P_6 output PWM 6 output (differential positive).
59 PWM_HPML output PWM left-channel headphone output (differential negative).
60 PWM_HPPL output PWM left-channel headphone output (differential positive).
61 PWM_HPMR output PWM right-channel headphone output (differential negative).
62 PWM_HPPR output PWM right-channel headphone output (differential positive).
63 MCLK input 3.3-V master clock input with pull-down and 5-V tolerance; the input frequency can range from 4 MHz to 50 MHz.
64 RESERVED passive Reserved terminal; connect to digital ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TQFP-64(10x10)
Category Interface
Pins 64

CAD (KiCad official)

  • Symbol: TAS5508CPAGR
  • Footprint: Package_QFP:TQFP-64_10x10mm_P0.5mm
  • 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: tas5508cpagr-etched.step / tas5508cpagr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tas5508cpagr.step / tas5508cpagr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (110 pp, sha256 28c65c2b268608ad, retrieved 2026-10-11, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF