TA75S393F

TOSHIBA · Comparators · SOT-25-5

TA75S393F from TOSHIBA, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	IN (−)	input	Inverting input; common mode range is 0 V to VCC − 1.5 V and differential input is limited to ±36 V.
2	VEE	power_in	Negative supply, tied to GND in single-supply operation (dual supplies ±1 V to ±18 V).
3	IN (+)	input	Non-inverting input; common mode range is 0 V to VCC − 1.5 V and differential input is limited to ±36 V.
4	OUT	output	Open-collector output that can be wired-OR with other open-collector outputs, sinking 6 mA min at VOL ≤ 1.5 V.
5	VCC	power_in	Positive supply, 2 V to 36 V single supply, which must be at least 1.5 V above the input common mode voltage.

Key specifications

Parameter	Value
Manufacturer	TOSHIBA
Package	SOT-25-5
Category	Amplifiers/Comparators
Pins	5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Input offset voltage	VIO		2	5	mV		2
Input offset current	IIO		5	50	nA		2
Input bias current	II		25	250	nA		2
Common mode input voltage	CMVIN	0			V		2
Supply current	ICC		0.4	0.8	mA	No load	2
Sink current	Isink		6	16	mA	IN(-) 0 V, IN(+) 1 V, VOL 1.5 V	2
Output voltage (L level)	VOL		0.2	0.4	V	IN(-) 0 V, IN(+) 1 V, Isink 3 mA	2
Output leak current	ILEAK			0.1	nA	IN(+) 1 V, IN(-) 0 V, VO 5 V	2
Voltage gain	GV		200		V/mV	RL = 15 kΩ	2
Response time	trsp		1.3		µs	RL 5.1 kΩ, CL 15 pF	2
Supply voltage	VCC, VEE			36	V	Printed as ±18 or 36 V	2
Differential input voltage	DVIN	-36		36	V		2
Input voltage	VIN	-0.3			V	Printed upper limit: VCC	2
Power dissipation	PD			200	mW	Note 1: unit rating	2
Operating temperature	Topr	-40		85	°C		2
Storage temperature	Tstg	-55		125	°C		2

CAD (KiCad official)

Symbol: TA75S393F
Footprint: Package_TO_SOT_SMD:SOT-23-5
3D model: SOT-25-5 (KiCad packages3D, STEP)
3D model files: ta75s393f-etched.step / ta75s393f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ta75s393f.step / ta75s393f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: TOSHIBA datasheet (6 pp, sha256 762242520783385b, retrieved 2026-10-21, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

# TA75S393F

**TOSHIBA** · Comparators · SOT-25-5

TA75S393F from TOSHIBA, in a SOT-25-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN (−) | input | Inverting input; common mode range is 0 V to VCC − 1.5 V and differential input is limited to ±36 V. |
| 2 | VEE | power_in | Negative supply, tied to GND in single-supply operation (dual supplies ±1 V to ±18 V). |
| 3 | IN (+) | input | Non-inverting input; common mode range is 0 V to VCC − 1.5 V and differential input is limited to ±36 V. |
| 4 | OUT | output | Open-collector output that can be wired-OR with other open-collector outputs, sinking 6 mA min at VOL ≤ 1.5 V. |
| 5 | VCC | power_in | Positive supply, 2 V to 36 V single supply, which must be at least 1.5 V above the input common mode voltage. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | TOSHIBA |
| Package | SOT-25-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO |  | 2 | 5 | mV |  | 2 |
| Input offset current | IIO |  | 5 | 50 | nA |  | 2 |
| Input bias current | II |  | 25 | 250 | nA |  | 2 |
| Common mode input voltage | CMVIN | 0 |  |  | V |  | 2 |
| Supply current | ICC |  | 0.4 | 0.8 | mA | No load | 2 |
| Sink current | Isink |  | 6 | 16 | mA | IN(-) 0 V, IN(+) 1 V, VOL 1.5 V | 2 |
| Output voltage (L level) | VOL |  | 0.2 | 0.4 | V | IN(-) 0 V, IN(+) 1 V, Isink 3 mA | 2 |
| Output leak current | ILEAK |  |  | 0.1 | nA | IN(+) 1 V, IN(-) 0 V, VO 5 V | 2 |
| Voltage gain | GV |  | 200 |  | V/mV | RL = 15 kΩ | 2 |
| Response time | trsp |  | 1.3 |  | µs | RL 5.1 kΩ, CL 15 pF | 2 |
| Supply voltage | VCC, VEE |  |  | 36 | V | Printed as ±18 or 36 V | 2 |
| Differential input voltage | DVIN | -36 |  | 36 | V |  | 2 |
| Input voltage | VIN | -0.3 |  |  | V | Printed upper limit: VCC | 2 |
| Power dissipation | PD |  |  | 200 | mW | Note 1: unit rating | 2 |
| Operating temperature | Topr | -40 |  | 85 | °C |  | 2 |
| Storage temperature | Tstg | -55 |  | 125 | °C |  | 2 |

## CAD (KiCad official)

- Symbol: `TA75S393F`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-25-5 (KiCad packages3D, STEP)
- 3D model files: `ta75s393f-etched.step` / `ta75s393f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ta75s393f.step` / `ta75s393f.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [TOSHIBA datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590903438865604608) (6 pp, sha256 `762242520783385b`, retrieved 2026-10-21, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ta75s393f-datasheet.pdf)