main
Ray
Publish 0.1.0
a27560f
T835T-8FP
STMicroelectronics · TRIACs · ITO-220AB-3
T835T-8FP from STMicroelectronics, in a ITO-220AB-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | passive | Main terminal A1, the reference for gate trigger and holding/latching current measurements; the tab is insulated (2 kV rms, 1 minute). |
| 2 | A2 | passive | Main terminal A2 of the triac, rated for 8 A rms on-state current and 800 V repetitive off-state voltage (VDRM/VRRM). |
| 3 | G | input | Gate trigger input, with IGT max 35 mA and VGT max 1.3 V at VD = 12 V, RL = 30 Ω, in quadrants I-II-III. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | ITO-220AB-3 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| On-state rms current | IT(rms) | 8 | A | full sine wave, Tc = 113°C | 2 | ||
| Non repetitive surge peak on-state current 50 Hz | ITSM | 60 | A | F = 50 Hz, t = 20 ms, Tj initial = 25 °C | 2 | ||
| Non repetitive surge peak on-state current 60 Hz | ITSM | 63 | A | F = 60 Hz, t = 16.7 ms, Tj initial = 25 °C | 2 | ||
| I²t value for fusing | I²t | 24 | A²s | tp = 10 ms, Tj initial = 25 °C | 2 | ||
| Repetitive peak off-state voltage | VDRM, VRRM | 600 | V | Tj = 150 °C | 2 | ||
| Repetitive peak off-state voltage | VDRM, VRRM | 800 | V | Tj = 125 °C | 2 | ||
| Non repetitive surge peak off-state voltage | VDSM, VRSM | 900 | V | tp = 10 ms | 2 | ||
| Critical rate of rise of on-state current | dI/dt | 100 | A/µs | IG = 2 x IGT, tr ≤ 100 ns, F = 100 Hz | 2 | ||
| Peak gate current | IGM | 4 | A | tp = 20 µs, Tj = 150 °C | 2 | ||
| Average gate power dissipation | PG(AV) | 1 | W | Tj = 150 °C | 2 | ||
| Storage junction temperature range | Tstg | -40 | 150 | °C | 2 | ||
| Operating junction temperature range | Tj | -40 | 150 | °C | 2 | ||
| Maximum lead temperature for soldering | TL | 260 | °C | during 10 s | 2 | ||
| Insulation rms voltage | Vins | 2 | kV | 1 minute | 2 | ||
| Gate trigger current | IGT | 1.75 | 35 | mA | VD = 12 V, RL = 30 Ω, quadrants I - II - III | 2 | |
| Gate trigger voltage | VGT | 1.3 | V | VD = 12 V, RL = 30 Ω, quadrants I - II - III | 2 | ||
| Gate non-trigger voltage | VGD | 0.2 | V | VD = VDRM, RL = 3.3 kΩ, Tj = 150 °C, quadrants I - II - III | 2 | ||
| Holding current | IH | 40 | mA | IT = 500 mA | 2 | ||
| Latching current quadrants I - III | IL | 60 | mA | IG = 1.2 IGT | 2 | ||
| Latching current quadrant II | IL | 65 | mA | IG = 1.2 IGT | 2 | ||
| Critical rate of rise of off-state voltage | dV/dt | 2000 | V/µs | VD = 536 V, gate open, Tj = 125 °C | 2 | ||
| Critical rate of rise of off-state voltage | dV/dt | 1000 | V/µs | VD = 402 V, gate open, Tj = 150 °C | 2 | ||
| Critical rate of decrease of commutating current | (dI/dt)c | 8 | A/ms | Without snubber (dV/dt)c ≥ 20 V/µs, Tj = 125 °C | 2 | ||
| Critical rate of decrease of commutating current | (dI/dt)c | 4 | A/ms | Without snubber (dV/dt)c ≥ 20 V/µs, Tj = 150 °C | 2 | ||
| On-state voltage | VT | 1.55 | V | ITM = 11.3 A, tp = 380 µs, Tj = 25 °C | 3 | ||
| Threshold voltage | Vt0 | 0.85 | V | Tj = 150 °C | 3 | ||
| Dynamic resistance | Rd | 57 | mΩ | Tj = 150 °C | 3 | ||
| Off-state leakage current | IDRM, IRRM | 5 | µA | VDRM = VRRM = 800 V, Tj = 25 °C | 3 | ||
| Off-state leakage current | IDRM, IRRM | 0.8 | mA | VDRM = VRRM = 800 V, Tj = 125 °C | 3 | ||
| Off-state leakage current | IDRM, IRRM | 2.4 | mA | VDRM = VRRM = 600 V, Tj = 150 °C | 3 | ||
| Junction to case thermal resistance (AC) | Rth(j-c) | 3.8 | °C/W | 3 | |||
| Junction to ambient thermal resistance | Rth(j-a) | 60 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
T835T-8FP - Footprint:
Package_TO_SOT_THT:TO-220F-3_Vertical - 3D model: ITO-220AB-3 (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (9 pp, sha256
c9f7e1a342e9ca95, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# T835T-8FP
**STMicroelectronics** · TRIACs · ITO-220AB-3
T835T-8FP from STMicroelectronics, in a ITO-220AB-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A1 | passive | Main terminal A1, the reference for gate trigger and holding/latching current measurements; the tab is insulated (2 kV rms, 1 minute). |
| 2 | A2 | passive | Main terminal A2 of the triac, rated for 8 A rms on-state current and 800 V repetitive off-state voltage (VDRM/VRRM). |
| 3 | G | input | Gate trigger input, with IGT max 35 mA and VGT max 1.3 V at VD = 12 V, RL = 30 Ω, in quadrants I-II-III. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | ITO-220AB-3 |
| Category | Transistors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| On-state rms current | IT(rms) | | | 8 | A | full sine wave, Tc = 113°C | 2 |
| Non repetitive surge peak on-state current 50 Hz | ITSM | | | 60 | A | F = 50 Hz, t = 20 ms, Tj initial = 25 °C | 2 |
| Non repetitive surge peak on-state current 60 Hz | ITSM | | | 63 | A | F = 60 Hz, t = 16.7 ms, Tj initial = 25 °C | 2 |
| I²t value for fusing | I²t | | | 24 | A²s | tp = 10 ms, Tj initial = 25 °C | 2 |
| Repetitive peak off-state voltage | VDRM, VRRM | | | 600 | V | Tj = 150 °C | 2 |
| Repetitive peak off-state voltage | VDRM, VRRM | | | 800 | V | Tj = 125 °C | 2 |
| Non repetitive surge peak off-state voltage | VDSM, VRSM | | | 900 | V | tp = 10 ms | 2 |
| Critical rate of rise of on-state current | dI/dt | | | 100 | A/µs | IG = 2 x IGT, tr ≤ 100 ns, F = 100 Hz | 2 |
| Peak gate current | IGM | | | 4 | A | tp = 20 µs, Tj = 150 °C | 2 |
| Average gate power dissipation | PG(AV) | | | 1 | W | Tj = 150 °C | 2 |
| Storage junction temperature range | Tstg | -40 | | 150 | °C | | 2 |
| Operating junction temperature range | Tj | -40 | | 150 | °C | | 2 |
| Maximum lead temperature for soldering | TL | | | 260 | °C | during 10 s | 2 |
| Insulation rms voltage | Vins | | | 2 | kV | 1 minute | 2 |
| Gate trigger current | IGT | 1.75 | | 35 | mA | VD = 12 V, RL = 30 Ω, quadrants I - II - III | 2 |
| Gate trigger voltage | VGT | | | 1.3 | V | VD = 12 V, RL = 30 Ω, quadrants I - II - III | 2 |
| Gate non-trigger voltage | VGD | 0.2 | | | V | VD = VDRM, RL = 3.3 kΩ, Tj = 150 °C, quadrants I - II - III | 2 |
| Holding current | IH | | | 40 | mA | IT = 500 mA | 2 |
| Latching current quadrants I - III | IL | | | 60 | mA | IG = 1.2 IGT | 2 |
| Latching current quadrant II | IL | | | 65 | mA | IG = 1.2 IGT | 2 |
| Critical rate of rise of off-state voltage | dV/dt | 2000 | | | V/µs | VD = 536 V, gate open, Tj = 125 °C | 2 |
| Critical rate of rise of off-state voltage | dV/dt | 1000 | | | V/µs | VD = 402 V, gate open, Tj = 150 °C | 2 |
| Critical rate of decrease of commutating current | (dI/dt)c | 8 | | | A/ms | Without snubber (dV/dt)c ≥ 20 V/µs, Tj = 125 °C | 2 |
| Critical rate of decrease of commutating current | (dI/dt)c | 4 | | | A/ms | Without snubber (dV/dt)c ≥ 20 V/µs, Tj = 150 °C | 2 |
| On-state voltage | VT | | | 1.55 | V | ITM = 11.3 A, tp = 380 µs, Tj = 25 °C | 3 |
| Threshold voltage | Vt0 | | | 0.85 | V | Tj = 150 °C | 3 |
| Dynamic resistance | Rd | | | 57 | mΩ | Tj = 150 °C | 3 |
| Off-state leakage current | IDRM, IRRM | | | 5 | µA | VDRM = VRRM = 800 V, Tj = 25 °C | 3 |
| Off-state leakage current | IDRM, IRRM | | | 0.8 | mA | VDRM = VRRM = 800 V, Tj = 125 °C | 3 |
| Off-state leakage current | IDRM, IRRM | | | 2.4 | mA | VDRM = VRRM = 600 V, Tj = 150 °C | 3 |
| Junction to case thermal resistance (AC) | Rth(j-c) | | 3.8 | | °C/W | | 3 |
| Junction to ambient thermal resistance | Rth(j-a) | | 60 | | °C/W | | 3 |
## CAD (KiCad official)
- Symbol: `T835T-8FP`
- Footprint: `Package_TO_SOT_THT:TO-220F-3_Vertical`
- 3D model: ITO-220AB-3 (KiCad packages3D, STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/t835t-8fp.pdf) (9 pp, sha256 `c9f7e1a342e9ca95`, retrieved 2026-10-26, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/t835t-8fp-datasheet.pdf)