# T527I107M006ATE100

**KEMET** · Tantalum Capacitors · I (EIA 3216-10)

T527I107M006ATE100 from KEMET, in a I (EIA 3216-10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | + | passive | Positive terminal; pad 1 of the KiCad polarised-capacitor footprint (CP_, pad 1 = +). |
| 2 | - | passive | Negative terminal. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | KEMET |
| Package | I (EIA 3216-10) |
| Category | Capacitors |
| Pins | 2 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Rated capacitance | C |  | 100 |  | µF | at 120 Hz/25°C | 17 |
| Capacitance tolerance (M = ±20%) |  | -20 |  | 20 | % | M suffix in part number | 10 |
| Rated voltage | UR |  |  | 6.3 | VDC | VDC at 105°C (Table 1, 6.3 V row) | 17 |
| DC leakage current | DCL |  |  | 63 | µA | at 25°C, maximum/5 minutes | 17 |
| Dissipation factor | DF |  |  | 8 | % | at 25°C, 120 Hz; DF measurement condition 120 Hz/0.5 Vrms/1.5 V DC Bias | 17 |
| ESR | ESR |  |  | 100 | mΩ | at 25°C, 100 kHz, maximum | 17 |
| Maximum allowable ripple current (rms) |  |  |  | 775 | mA | at +45°C, 100 kHz | 17 |
| Operating temperature range | T | -55 |  | 105 | °C | −55°C to 105°C maximum rated temperature for this part (105°C rated, Table 1) | 4 |
| Reflow temperature |  |  |  | 260 | °C | Reflow temp ≤ 260°C (Table 1 column) | 17 |
| Endurance capacitance change (T527) | ΔC/C | -20 |  | 20 | % | Endurance 105°C, 1.0 x rated voltage, 1,000 h for T527; within −20/+20% of initial value | 5 |
| Endurance DF (T527) | DF |  |  | 1.5 | x initial limit | Endurance, T527/T529/TF08A: within 1.5 x initial limits | 5 |
| Endurance DC leakage (T527) | DCL |  |  | 1 | x initial limit | Endurance, T527/TF08A: within initial limits | 5 |
| Humidity capacitance change (T527) | ΔC/C | -20 |  | 30 | % | Humidity 60°C, 90% RH, no load, 500 h; T527/T529/TF08A: −20% to +30% of initial DC/C limit | 5 |
| Humidity DF (T527) | DF |  |  | 1.5 | x initial limit | Humidity 60°C, 90% RH, 500 h; T527/T529/TF08A: within 1.5 x initial limits | 5 |
| Humidity DC leakage (T527) | DCL |  |  | 1 | x initial limit | Humidity 60°C, 90% RH, 500 h; T527/TF08A: within initial limits | 5 |
| Surge capacitance change (T527) | ΔC/C | -20 |  | 20 | % | Surge 1.32 x rated voltage, 1,000 cycles, 85°C for T527; within −20/+20% of initial value | 5 |
| Surge DF (T527) | DF |  |  | 1 | x initial limit | Surge voltage test, 1,000 cycles; within initial limits | 5 |
| Surge DC leakage (T527) | DCL |  |  | 1 | x initial limit | Surge voltage test, 1,000 cycles; within initial limits | 5 |
| Mechanical shock/vibration capacitance change | ΔC/C | -10 |  | 10 | % | MIL-STD-202 Method 213 Condition I, 100 G peak; within ±10% of initial value | 5 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts |  | tin | H*** = Tin/lead (SnPb) solder coated | 3 |

## CAD (land: KiCad; 3D: generated from the datasheet)

- Symbol: `T527I107M006ATE100`
- Footprint: `Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I`
- 3D model: I (EIA 3216-10), generated on the KiCad land (body 3.2 x 1.6 mm, terminals on the pads, 0.9 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `t527i107m006ate100-etched.step` / `t527i107m006ate100-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `t527i107m006ate100.step` / `t527i107m006ate100.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [KEMET datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588926592516542464) (44 pp, sha256 `6fd8efcb12dcdc80`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `polarised-capacitor convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

[Datasheet PDF](docs/t527i107m006ate100-datasheet.pdf)