component
T117
Public Made by Adomby adom
VIBRATION RF Transceiver ICs, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 6d ago |
| viewers | 6d ago |
| package.json | 6d ago |
| page.json | 6d ago |
| README.md | 6d ago |
| t117-etched.glb | 6d ago |
| t117-etched.step | 6d ago |
| t117-hero.glb | 6d ago |
| t117-hero.overlay.json | 6d ago |
| t117.glb | 6d ago |
| t117.kicad_mod | 6d ago |
| t117.kicad_sym | 6d ago |
| t117.lbr | 6d ago |
| t117.step | 6d ago |
T117
VIBRATION · RF Transceiver ICs · SOT-23-6
T117 from VIBRATION, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PAOUT | output | Power amplifier RF output, which delivers 12 to 13 dBm at 315 MHz and 434 MHz per the electrical characteristics, depending on the output matching network. |
| 2 | VSS | power_in | Ground reference for the device (0 V per the rated conditions). |
| 3 | VDD | power_in | Supply voltage input, operating from 2.0 V to 3.6 V (3.0 V rated), with an absolute maximum of 3.6 V and a minimum of -0.3 V. |
| 4 | XIN | output | Crystal oscillator output pin (labeled O in the datasheet); the crystal oscillator start-up time is 0.5 ms typical with CL unconnected. |
| 5 | VSS | power_in | Ground pin; a second VSS connection that should be tied to the same ground as pin 2. |
| 6 | ASK | input | ASK/OOK data input with a data rate of 0.5 to 10 Kbps; I/O voltage limited to -0.3 V to 3.6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | VIBRATION |
| Package | SOT-23-6 |
| Category | RF And Wireless |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 (Supply voltage) | VDD | 2 | 3 | 3.6 | V | 6 | |
| 工作电流 (Operating current, ASK=High, 315MHz) | IDD | 28 | mA | ASK=High, POUT=13dBm, fRF=315MHz | 6 | ||
| 工作电流 (Operating current, ASK=High, 434MHz) | IDD | 32 | mA | ASK=High, POUT=13dBm, fRF=434MHz | 6 | ||
| 待机电流 (Standby current) | Istandby | 1 | uA | ASK=Low; TDELAY>50ms | 6 | ||
| 频率范围 (Frequency range) | fRF | 200 | 450 | MHz | 6 | ||
| 功放输出功率 (PA output power, 315MHz) | Pout | 12 | 13 | dBm | fRF = 315MHz | 6 | |
| 功放输出功率 (PA output power, 434MHz) | Pout | 12 | 13 | dBm | fRF = 434MHz | 6 | |
| 射频电源的开关比率 (RF on/off ratio) | PEXT | 60 | dB | 6 | |||
| 相位噪声 (Phase noise) | PNOISE | -85 | dBc/Hz | 315MHz, 10KHz offset | 6 | ||
| 谐频 (Harmonics) | PHARM | -40 | dBc | 2x/3x fRF | 6 | ||
| 杂散 (Spurious, crystal) | PSPUR | -50 | dBc | fRF = 315MHz | 6 | ||
| ASK 输入速率 (ASK input data rate) | DRATE | 0.5 | 2 | 10 | Kbps | OOK/ASK 模式 | 6 |
| 晶振起振时间 (Crystal start-up time) | TON | 0.5 | ms | CL 未连接 | 6 | ||
| 单稳态延迟时间 (Monostable delay time) | TDELAY | 50 | ms | fRF = 434MHz | 6 | ||
| 供给电压范围 (Supply voltage range, absolute max) | VDD | -0.3 | 3.6 | V | 5 | ||
| I/O 电压 (I/O voltage, absolute max) | -0.3 | 3.6 | V | 5 | |||
| 工作温度范围 (Operating temperature range) | TA | -40 | 85 | °C | 5 | ||
| 存储温度范围 (Storage temperature range) | TSTG | -55 | 125 | °C | 5 |
CAD (KiCad official)
- Symbol:
T117 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
t117-etched.step/t117-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);t117.step/t117.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: VIBRATION datasheet (7 pp, sha256
75e6404711d2f9ec, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).