component
T0603HI3500TM
Public Made by Adomby adom
AEM Disposable Fuses, 0603. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownT0603HI3500TM
AEM · Disposable Fuses · 0603
T0603HI3500TM from AEM, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AEM |
| Package | 0603 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature | -55 | 90 | °C | 1 | |||
| Opening time at 100% of current rating | 4 | hours | 25°C ambient, 100% of current rating | 1 | |||
| Opening time at 200% of current rating | 1 | 60 | seconds | 25°C ambient, 200% of current rating | 1 | ||
| Opening time at 1000% of current rating | 0.0002 | 0.02 | second | 25°C ambient, 1000% of current rating | 1 | ||
| Interrupting rating | 35 | A | 35A@35V DC/AC | 1 | |||
| Voltage rating | 35 | VDC | 1 | ||||
| Solderability, coverage | 95 | % | One dip at 255℃ for 5 seconds, MIL-STD-202 Method 208 | 4 | |||
| Bending, DCR change (>1A) | 20 | % | 2mm, refer to AEM QIQ034; applies to >1A parts | 4 | |||
| Thermal shock, DCR change | -10 | 10 | % | 100 cycles between -55°C and +125°C, MIL-STD-202 Method 107 | 4 | ||
| Moisture resistance, DCR change | -10 | 10 | % | 10 cycles, MIL-STD-202 Method 106 | 4 | ||
| Salt spray, DCR change | -10 | 10 | % | 5% salt solution, 48 hour exposure, MIL-STD-202 Method 101 | 4 | ||
| Mechanical vibration, DCR change | -10 | 10 | % | 0.4” D.A. or 30G between 5 and 3000 Hz, MIL-STD-202 Method 204 | 4 | ||
| Mechanical shock, DCR change | -10 | 10 | % | 1500G, 0.5 ms, half sine shocks, MIL-STD-202 Method 213 | 4 | ||
| Life, change of voltage drop | -10 | 10 | % | 75% rated current, 2000 hours, ambient temperature +20°C to 30°C | 4 | ||
| Preheat/soak temperature | Tsmin, Tsmax | 150 | 200 | °C | Pb-free assembly | 5 | |
| Preheat/soak time (Tsmin to Tsmax) | ts | 60 | 120 | seconds | From Tsmin to Tsmax | 5 | |
| Ramp-up rate (TL to Tp) | 3 | °C/second | 5 | ||||
| Time tL maintained above TL | tL | 60 | 150 | seconds | Above liquidous temperature TL | 5 | |
| Peak package body temperature | Tp | 260 | °C | Pb-free reflow profile | 5 | ||
| Ramp-down rate (Tp to TL) | 6 | °C/second | 5 | ||||
| Time from 25°C to peak temperature | 8 | minutes | 5 | ||||
| Soldering iron tip temperature | 350 | °C | Manual correction with soldering iron | 5 | |||
| Soldering iron contact time | 3 | seconds | Manual correction with soldering iron | 5 | |||
| Liquidous temperature | TL | 217 | °C | Pb-free reflow profile | 5 | ||
| Time tp within 5°C of classification temperature Tc | tp | 30 | seconds | Within 5°C of specified classification temperature Tc | 5 | ||
| Current rating | 3.5 | A | T0603HI3500TM rated current | 1 | |||
| Nominal cold DCR | 0.012 | Ω | Measured at ≤10% of rated current and 25˚C ambient | 1 | |||
| Nominal I2t | 0.8 | A2s | Melting I2t at 0.001 sec | 1 |
CAD (KiCad official)
- Symbol:
T0603HI3500TM - Footprint:
Fuse:Fuse_0603_1608Metric - 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files:
t0603hi3500tm-etched.step/t0603hi3500tm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);t0603hi3500tm.step/t0603hi3500tm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AEM datasheet (6 pp, sha256
0bbf9d2391bc434d, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).