main
Ray Publish 0.1.0 d9913c8

SZMMBZ5230BLT1G

onsemi · Zener Diodes · SOT-23

SZMMBZ5230BLT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 ANODE passive Anode terminal of the Zener diode, identified in the STYLE 8 pin assignment for the SOT-23 outline.
2 NC unconnected No connection; the datasheet specifies this pin as NO CONNECTION in the STYLE 8 pin assignment and the pinout note on page 2 and 3.
3 CATHODE passive Cathode terminal of the Zener diode, marked by the polarity band on the package.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-23
Category Diodes
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reverse Zener Voltage @ IZT VZ 4.46 4.7 4.94 V @ IZT = 20 mA (Note 3: pulse test, TA = 25°C) 3
Maximum Zener Impedance @ IZT ZZT 19 Ω @ IZT = 20 mA 3
Maximum Zener Impedance @ IZK ZZK 1900 Ω @ IZK = 0.25 mA 3
Reverse Leakage Current IR 5 µA @ VR = 2 V 3
Forward Voltage VF 0.9 V @ IF = 10 mA 3
Total Power Dissipation on FR-5 Board PD 225 mW FR-5 board (Note 1), TA = 25°C; derated 1.8 mW/°C above 25°C 1
Total Power Dissipation on Alumina Substrate PD 300 mW Alumina substrate (Note 2), TA = 25°C; derated 2.4 mW/°C above 25°C 1
Thermal Resistance, Junction-to-Ambient RJA 556 °C/W FR-5 board (Note 1) 1
Thermal Resistance, Junction-to-Ambient RJA 417 °C/W Alumina substrate (Note 2) 1
Junction and Storage Temperature Range TJ, Tstg -65 150 °C 1

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: SZMMBZ5230BLT1G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: szmmbz5230blt1g-etched.step / szmmbz5230blt1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); szmmbz5230blt1g.step / szmmbz5230blt1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (7 pp, sha256 17d1d436c4fa25f3, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF