main
Ray Publish 0.1.0 5e1ba14

SZBZX84C27LT1G

onsemi · Zener Diodes · SOT-23

SZBZX84C27LT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 ANODE passive Anode terminal of the Zener diode; the cathode is pin 3, marked by the polarity band on the package.
2 NO CONNECTION unconnected Pin 2 is not internally connected and is listed as No Connection in the pinout note.
3 CATHODE passive Cathode terminal of the Zener diode, identified by the polarity band; it is the regulated side of the Zener.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-23
Category Diodes
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Forward Voltage VF 0.9 V @ IF = 10 mA 2
Reverse Zener Voltage VZ 25.1 27 28.9 V @ IZT1 = 2 mA 3
Maximum Zener Impedance ZZT 80 Ω @ IZT1 = 2 mA 3
Reverse Zener Voltage VZ 25 28.9 V @ IZT2 = 0.1 mA 3
Maximum Zener Impedance ZZT 300 Ω @ IZT4 = 0.5 mA 3
Reverse Zener Voltage VZ 25.2 29.3 V @ IZT3 = 10 mA 3
Maximum Zener Impedance ZZT 45 Ω @ IZT3 = 10 mA 3
Reverse Leakage Current IR 0.05 µA @ VR = 18.9 V 3
Maximum Temperature Coefficient of VZ VZ 21.4 25.3 mV/k @ IZT1 = 2 mA 3
Maximum Capacitance C 70 pF @ VR = 0, f = 1 MHz 3
Total Power Dissipation on FR-5 Board PD 250 mW @ TA = 25°C, FR-5 board (Note 1) 2
Total Power Dissipation on Alumina Substrate PD 300 mW @ TA = 25°C, alumina substrate (Note 2) 2
Junction and Storage Temperature Range TJ, Tstg -65 150 °C 2
Thermal Resistance, Junction-to-Ambient RJA 500 °C/W FR-5 board (Note 1) 2
Thermal Resistance, Junction-to-Ambient RJA 417 °C/W Alumina substrate (Note 2) 2
Derating above 25°C PD 2 mW/°C Derated above 25°C, FR-5 board (Note 1) 2
Derating above 25°C PD 2.4 mW/°C Derated above 25°C, alumina substrate (Note 2) 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: SZBZX84C27LT1G
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: szbzx84c27lt1g-etched.step / szbzx84c27lt1g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); szbzx84c27lt1g.step / szbzx84c27lt1g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (8 pp, sha256 b0f156e963b31101, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF