main
Ray
Publish 0.1.0
6e1b903
SZBZX84B3V3LT1G
onsemi · Zener Diodes · SOT-23
SZBZX84B3V3LT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | passive | Anode terminal of the Zener diode; the cathode is identified by the polarity band and is pin 3. |
| 2 | NO CONNECTION | unconnected | Pin 2 has no internal connection and is not used in the Zener circuit. |
| 3 | CATHODE | passive | Cathode terminal of the Zener diode, marked by the polarity band on the package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23 |
| Category | Diodes |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reverse Zener Voltage | VZ | 3.23 | 3.3 | 3.37 | V | @ IZT = 5 mA (pulse test, Note 4); BZX84B3V3LT1G, T2A marking | 4 |
| Maximum Zener Impedance | ZZT | 95 | Ω | @ IZT = 5 mA | 4 | ||
| Reverse Leakage Current | IR | 5 | µA | @ VR = 1 V | 4 | ||
| Maximum Temperature Coefficient of VZ | VZ | -3.5 | 0 | mV/k | @ IZT = 5 mA | 4 | |
| Maximum Capacitance | C | 450 | pF | @ VR = 0, f = 1 MHz | 4 | ||
| Forward Voltage | VF | 0.9 | V | @ IF = 10 mA | 2 | ||
| Total Power Dissipation on FR-5 Board | PD | 250 | mW | FR-5 board (Note 1) @ TA = 25°C | 2 | ||
| Derating above 25°C, FR-5 Board | PD | 2 | mW/°C | FR-5 board (Note 1), derated above 25°C | 2 | ||
| Thermal Resistance, Junction-to-Ambient, FR-5 Board | RθJA | 500 | °C/W | FR-5 board (Note 1) | 2 | ||
| Total Power Dissipation on Alumina Substrate | PD | 300 | mW | Alumina substrate (Note 2) @ TA = 25°C | 2 | ||
| Derating above 25°C, Alumina Substrate | PD | 2.4 | mW/°C | Alumina substrate (Note 2), derated above 25°C | 2 | ||
| Thermal Resistance, Junction-to-Ambient, Alumina Substrate | RθJA | 417 | °C/W | Alumina substrate (Note 2) | 2 | ||
| Junction and Storage Temperature Range | TJ, Tstg | -65 | 150 | °C | 2 |
CAD (KiCad official)
- Symbol:
SZBZX84B3V3LT1G - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
szbzx84b3v3lt1g-etched.step/szbzx84b3v3lt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);szbzx84b3v3lt1g.step/szbzx84b3v3lt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (8 pp, sha256
ce64915aff15c1c1, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SZBZX84B3V3LT1G
**onsemi** · Zener Diodes · SOT-23
SZBZX84B3V3LT1G from onsemi, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANODE | passive | Anode terminal of the Zener diode; the cathode is identified by the polarity band and is pin 3. |
| 2 | NO CONNECTION | unconnected | Pin 2 has no internal connection and is not used in the Zener circuit. |
| 3 | CATHODE | passive | Cathode terminal of the Zener diode, marked by the polarity band on the package. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23 |
| Category | Diodes |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reverse Zener Voltage | VZ | 3.23 | 3.3 | 3.37 | V | @ IZT = 5 mA (pulse test, Note 4); BZX84B3V3LT1G, T2A marking | 4 |
| Maximum Zener Impedance | ZZT | | | 95 | Ω | @ IZT = 5 mA | 4 |
| Reverse Leakage Current | IR | | | 5 | µA | @ VR = 1 V | 4 |
| Maximum Temperature Coefficient of VZ | VZ | -3.5 | | 0 | mV/k | @ IZT = 5 mA | 4 |
| Maximum Capacitance | C | | | 450 | pF | @ VR = 0, f = 1 MHz | 4 |
| Forward Voltage | VF | | | 0.9 | V | @ IF = 10 mA | 2 |
| Total Power Dissipation on FR-5 Board | PD | | | 250 | mW | FR-5 board (Note 1) @ TA = 25°C | 2 |
| Derating above 25°C, FR-5 Board | PD | | | 2 | mW/°C | FR-5 board (Note 1), derated above 25°C | 2 |
| Thermal Resistance, Junction-to-Ambient, FR-5 Board | RθJA | | | 500 | °C/W | FR-5 board (Note 1) | 2 |
| Total Power Dissipation on Alumina Substrate | PD | | | 300 | mW | Alumina substrate (Note 2) @ TA = 25°C | 2 |
| Derating above 25°C, Alumina Substrate | PD | | | 2.4 | mW/°C | Alumina substrate (Note 2), derated above 25°C | 2 |
| Thermal Resistance, Junction-to-Ambient, Alumina Substrate | RθJA | | | 417 | °C/W | Alumina substrate (Note 2) | 2 |
| Junction and Storage Temperature Range | TJ, Tstg | -65 | | 150 | °C | | 2 |
## CAD (KiCad official)
- Symbol: `SZBZX84B3V3LT1G`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.0 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `szbzx84b3v3lt1g-etched.step` / `szbzx84b3v3lt1g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `szbzx84b3v3lt1g.step` / `szbzx84b3v3lt1g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/szbzx84b3v3lt1-d.pdf) (8 pp, sha256 `ce64915aff15c1c1`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/szbzx84b3v3lt1g-datasheet.pdf)