SYN500R

{
  "slug": "syn500r",
  "version": "0.1.0",
  "type": "component",
  "description": "JSMSEMI RF Transceiver ICs, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "rf and wireless",
    "syn500r",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "syn500r.kicad_sym",
    "syn500r.kicad_mod",
    "syn500r.glb",
    "syn500r.step",
    "syn500r.lbr",
    "docs/hero.png",
    "docs/syn500r-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "syn500r-hero.glb",
    "syn500r-hero.overlay.json",
    "syn500r-etched.glb"
  ],
  "component": {
    "mpn": "SYN500R",
    "manufacturer": "JSMSEMI",
    "package": "SSOP-16-150mil",
    "pin_count": 16,
    "category": "RF And Wireless",
    "subcategory": "RF Transceiver ICs",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588950318202044416",
    "parts": {
      "symbol": "syn500r.kicad_sym",
      "footprint": "syn500r.kicad_mod",
      "model_3d": "syn500r-hero.glb",
      "model_3d_plain": "syn500r-etched.glb",
      "model_3d_step": "syn500r-etched.step",
      "model_3d_step_plain": "syn500r.step",
      "lbr": "syn500r.lbr"
    },
    "distributor_links": {
      "lcsc": "C916348"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T10:47:28Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "RO1",
        "type": "input",
        "description": "External crystal reference input 1, one of the two reference-oscillator pins (RO1/RO2); the datasheet gives no further limits for this pin."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; all voltages in the datasheet are referenced to GND."
      },
      {
        "number": "3",
        "name": "ANT",
        "type": "input",
        "description": "RF input from the antenna; the maximum input power is 10 dBm in the absolute maximum ratings and 0 dBm in the recommended operating conditions, and its DC voltage must stay between -0.3 V and VDD+0.3 V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; all voltages in the datasheet are referenced to GND."
      },
      {
        "number": "5",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage, 2.0 V to 5.0 V recommended (6 V absolute maximum); the datasheet recommends a 0.1 μF decoupling capacitor placed close to the device and a 47 Ω series resistor on 5 V applications."
      },
      {
        "number": "6",
        "name": "SQ",
        "type": "input",
        "description": "Squelch enable: low enables the squelch function, high disables it, and its DC voltage must stay between -0.3 V and VDD+0.3 V."
      },
      {
        "number": "7",
        "name": "SEL0",
        "type": "input",
        "description": "Select bit 0 for the data-rate/bandwidth setting (together with SEL1), which sets the recommended maximum data rate and the squelch threshold; its DC voltage must stay between -0.3 V and VDD+0.3 V."
      },
      {
        "number": "8",
        "name": "SHDN",
        "type": "input",
        "description": "Power-saving mode enable: high puts the device into power-saving mode with total current below 1 μA, and low gives normal operation; its DC voltage must stay between -0.3 V and VDD+0.3 V."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; all voltages in the datasheet are referenced to GND."
      },
      {
        "number": "10",
        "name": "DO",
        "type": "output",
        "description": "Decoded data output; the datasheet gives a 0.8*VDD high-level output current of 235 μA and a 0.2*VDD low-level output current of 400 μA, with rise and fall times of 600 ns and 250 ns at 15 pF load."
      },
      {
        "number": "11",
        "name": "SEL1",
        "type": "input",
        "description": "Select bit 1 for the data-rate/bandwidth setting (together with SEL0); its DC voltage must stay between -0.3 V and VDD+0.3 V."
      },
      {
        "number": "12",
        "name": "CTH",
        "type": "passive",
        "description": "Reference voltage pin used with an external capacitor; the datasheet test condition uses CTH = 0.1 μF."
      },
      {
        "number": "13",
        "name": "CAGC",
        "type": "passive",
        "description": "AGC capacitor pin; it sources 120 μA during power-up fast settling, and the recommended capacitance depends on SEL1/SEL0 (4.7 μF, 2.2 μF, 1 μF or 0.47 μF)."
      },
      {
        "number": "14",
        "name": "RSSI",
        "type": "output",
        "description": "Received signal strength indicator output, with an output voltage of 0.5 V to 1 V and an output current of about 400 μA, and a response time of about 100 ms."
      },
      {
        "number": "15",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      },
      {
        "number": "16",
        "name": "RO2",
        "type": "input",
        "description": "External crystal reference input 2, the second of the reference-oscillator pins (RO1/RO2); the datasheet gives no further limits for this pin."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin table on page 2 labels SEL0/SEL1 as bandwidth select, but section 5.8 on page 5 describes th; The datasheet names RO1/RO2 only as external crystal reference inputs and gives no crystal or load-c; CTH and CAGC are external-capacitor pins. The datasheet gives capacitor values but not a pin type. T"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0511,
        "at": "2026-10-18T10:44:39"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588950318202044416",
        "pages": 10,
        "sha256": "e13f03ec5a345f96",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "syn500r.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "syn500r-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9648e1119b7e0fe12d012b11dee2219c97218322e07a04ab71226b8f4d8e0cdc",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}