main
Ray
Publish 0.1.0
ee0d5ae
SY89645LK4G
Microchip Tech · Clock Buffers, Drivers · TSSOP-20
SY89645LK4G from Microchip Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power supply ground for the device. |
| 2 | CLK_EN | input | Clock enable: when LOW the Q outputs are forced low and /Q outputs forced high, when HIGH the outputs follow the input clock; it has an internal 50kΩ pull-up and VTH = VCC/2. |
| 3 | NC | unconnected | No connect pin. |
| 4 | CLKIN | input | LVCMOS/LVTTL clock input that accepts single-ended signals as small as 1.2V, with VTH = VCC/2 and an internal 50kΩ pull-down resistor. |
| 5 | NC | unconnected | No connect pin. |
| 6 | NC | unconnected | No connect pin. |
| 7 | NC | unconnected | No connect pin. |
| 8 | NC | unconnected | No connect pin. |
| 9 | GND | power_in | Power supply ground for the device. |
| 10 | VCC | power_in | Positive 3.3V supply pin; bypass with low ESR capacitors as close to the pins as possible. |
| 11 | /Q3 | output | Inverted LVDS differential output of pair Q3//Q3, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 12 | Q3 | output | Non-inverted LVDS differential output of pair Q3//Q3, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 13 | GND | power_in | Power supply ground for the device. |
| 14 | /Q2 | output | Inverted LVDS differential output of pair Q2//Q2, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 15 | Q2 | output | Non-inverted LVDS differential output of pair Q2//Q2, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 16 | /Q1 | output | Inverted LVDS differential output of pair Q1//Q1, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 17 | Q1 | output | Non-inverted LVDS differential output of pair Q1//Q1, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 18 | VCC | power_in | Positive 3.3V supply pin; bypass with low ESR capacitors as close to the pins as possible. |
| 19 | /Q0 | output | Inverted LVDS differential output of pair Q0//Q0, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 20 | Q0 | output | Non-inverted LVDS differential output of pair Q0//Q0, typically 280mV swing and normally terminated with 100Ω across the pair. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-20 |
| Category | RTC/Clock Chip |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) absolute maximum | VCC | -0.5 | 4.6 | V | 3 | ||
| Input Voltage absolute maximum (upper limit printed as VCC +0.3V) | VIN | -0.5 | V | 3 | |||
| LVDS Output Current absolute maximum | IOUT | -10 | 10 | mA | 3 | ||
| Lead Temperature absolute maximum | 260 | °C | soldering, 20 sec. | 3 | |||
| Storage Temperature | Ts | -65 | 150 | °C | 3 | ||
| Supply Voltage operating range | VIN | 3.135 | 3.465 | V | 3 | ||
| Ambient Temperature operating range | TA | -40 | 85 | °C | 3 | ||
| VCC Positive Supply Voltage Range | VCC | 3.135 | 3.3 | 3.465 | V | 3 | |
| Power Supply Current | ICC | 43 | 60 | mA | No Load | 3 | |
| Input HIGH Voltage (CLKIN, CLK_EN) | VIH | 2 | V | CLKIN, CLK_EN | 3 | ||
| Input LOW Voltage (CLKIN, CLK_EN) | VIL | -0.3 | 0.8 | V | CLKIN, CLK_EN | 3 | |
| Input HIGH Current (CLKIN) | IIH | 150 | µA | VCC = VIN = 3.465V | 3 | ||
| Input HIGH Current (CLK_EN) | IIH | 70 | µA | VCC = VIN = 3.465V | 3 | ||
| Input LOW Current (CLKIN) | IIL | -70 | µA | VCC = 3.465V, VIN = 0V | 3 | ||
| Input LOW Current (CLK_EN) | IIL | -150 | µA | VCC = 3.465V, VIN = 0V | 3 | ||
| Output Voltage Swing | VOUT | 200 | 280 | mV | See Figure 1a | 3 | |
| Differential Output Voltage Swing | VDIFF_OUT | 400 | 560 | mV | See Figure 1b | 3 | |
| Output Common Mode Voltage | VOCM | 1.125 | 1.25 | 1.375 | V | 3 | |
| Change in Common Mode Voltage | ΔVOCM | 5 | 25 | mV | 3 | ||
| Maximum Frequency | fMAX | 650 | MHz | VOUT > 140mV | 4 | ||
| Propagation Delay | tPD | 1 | 1.8 | 3 | ns | fMAX ≤ 650MHz, Note 6 | 4 |
| Output Skew | tSKEW | 40 | ps | Note 7 | 4 | ||
| Part-to-Part Skew | tSKEW | 500 | ps | Note 8 | 4 | ||
| Output Rise/Fall Times (20% to 80%) | tr, tf | 150 | 250 | 400 | ps | fMAX ≤ 266MHz | 4 |
| Duty Cycle | 45 | 55 | % | fMAX ≤ 266MHz | 4 | ||
| Duty Cycle | 40 | 60 | % | fMAX > 266MHz | 4 |
CAD (KiCad official)
- Symbol:
SY89645LK4G - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
sy89645lk4g-etched.step/sy89645lk4g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sy89645lk4g.step/sy89645lk4g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (8 pp, sha256
9913cd9faddc80ac, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SY89645LK4G
**Microchip Tech** · Clock Buffers, Drivers · TSSOP-20
SY89645LK4G from Microchip Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power supply ground for the device. |
| 2 | CLK_EN | input | Clock enable: when LOW the Q outputs are forced low and /Q outputs forced high, when HIGH the outputs follow the input clock; it has an internal 50kΩ pull-up and VTH = VCC/2. |
| 3 | NC | unconnected | No connect pin. |
| 4 | CLKIN | input | LVCMOS/LVTTL clock input that accepts single-ended signals as small as 1.2V, with VTH = VCC/2 and an internal 50kΩ pull-down resistor. |
| 5 | NC | unconnected | No connect pin. |
| 6 | NC | unconnected | No connect pin. |
| 7 | NC | unconnected | No connect pin. |
| 8 | NC | unconnected | No connect pin. |
| 9 | GND | power_in | Power supply ground for the device. |
| 10 | VCC | power_in | Positive 3.3V supply pin; bypass with low ESR capacitors as close to the pins as possible. |
| 11 | /Q3 | output | Inverted LVDS differential output of pair Q3//Q3, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 12 | Q3 | output | Non-inverted LVDS differential output of pair Q3//Q3, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 13 | GND | power_in | Power supply ground for the device. |
| 14 | /Q2 | output | Inverted LVDS differential output of pair Q2//Q2, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 15 | Q2 | output | Non-inverted LVDS differential output of pair Q2//Q2, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 16 | /Q1 | output | Inverted LVDS differential output of pair Q1//Q1, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 17 | Q1 | output | Non-inverted LVDS differential output of pair Q1//Q1, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 18 | VCC | power_in | Positive 3.3V supply pin; bypass with low ESR capacitors as close to the pins as possible. |
| 19 | /Q0 | output | Inverted LVDS differential output of pair Q0//Q0, typically 280mV swing and normally terminated with 100Ω across the pair. |
| 20 | Q0 | output | Non-inverted LVDS differential output of pair Q0//Q0, typically 280mV swing and normally terminated with 100Ω across the pair. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TSSOP-20 |
| Category | RTC/Clock Chip |
| Pins | 20 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) absolute maximum | VCC | -0.5 | | 4.6 | V | | 3 |
| Input Voltage absolute maximum (upper limit printed as VCC +0.3V) | VIN | -0.5 | | | V | | 3 |
| LVDS Output Current absolute maximum | IOUT | -10 | | 10 | mA | | 3 |
| Lead Temperature absolute maximum | | | | 260 | °C | soldering, 20 sec. | 3 |
| Storage Temperature | Ts | -65 | | 150 | °C | | 3 |
| Supply Voltage operating range | VIN | 3.135 | | 3.465 | V | | 3 |
| Ambient Temperature operating range | TA | -40 | | 85 | °C | | 3 |
| VCC Positive Supply Voltage Range | VCC | 3.135 | 3.3 | 3.465 | V | | 3 |
| Power Supply Current | ICC | | 43 | 60 | mA | No Load | 3 |
| Input HIGH Voltage (CLKIN, CLK_EN) | VIH | 2 | | | V | CLKIN, CLK_EN | 3 |
| Input LOW Voltage (CLKIN, CLK_EN) | VIL | -0.3 | | 0.8 | V | CLKIN, CLK_EN | 3 |
| Input HIGH Current (CLKIN) | IIH | | | 150 | µA | VCC = VIN = 3.465V | 3 |
| Input HIGH Current (CLK_EN) | IIH | | | 70 | µA | VCC = VIN = 3.465V | 3 |
| Input LOW Current (CLKIN) | IIL | -70 | | | µA | VCC = 3.465V, VIN = 0V | 3 |
| Input LOW Current (CLK_EN) | IIL | -150 | | | µA | VCC = 3.465V, VIN = 0V | 3 |
| Output Voltage Swing | VOUT | 200 | 280 | | mV | See Figure 1a | 3 |
| Differential Output Voltage Swing | VDIFF_OUT | 400 | 560 | | mV | See Figure 1b | 3 |
| Output Common Mode Voltage | VOCM | 1.125 | 1.25 | 1.375 | V | | 3 |
| Change in Common Mode Voltage | ΔVOCM | | 5 | 25 | mV | | 3 |
| Maximum Frequency | fMAX | 650 | | | MHz | VOUT > 140mV | 4 |
| Propagation Delay | tPD | 1 | 1.8 | 3 | ns | fMAX ≤ 650MHz, Note 6 | 4 |
| Output Skew | tSKEW | | | 40 | ps | Note 7 | 4 |
| Part-to-Part Skew | tSKEW | | | 500 | ps | Note 8 | 4 |
| Output Rise/Fall Times (20% to 80%) | tr, tf | 150 | 250 | 400 | ps | fMAX ≤ 266MHz | 4 |
| Duty Cycle | | 45 | | 55 | % | fMAX ≤ 266MHz | 4 |
| Duty Cycle | | 40 | | 60 | % | fMAX > 266MHz | 4 |
## CAD (KiCad official)
- Symbol: `SY89645LK4G`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `sy89645lk4g-etched.step` / `sy89645lk4g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sy89645lk4g.step` / `sy89645lk4g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/sy89645lk4g-datasheet.pdf) (8 pp, sha256 `9913cd9faddc80ac`, retrieved 2026-10-28, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sy89645lk4g-datasheet.pdf)