main
History Download
Ray Publish 0.1.0 7b3d367

SY8703ABC

Silergy Corp · LED Drivers · SOT-23-6

SY8703ABC from Silergy Corp, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
5 IN power_in Input pin that should be decoupled to GND with a 1uF ceramic capacitor, also used as the positive current sense pin, with IN rated 2.5V to 30V in recommended operating conditions.
2 GND power_in Ground pin; maximize the PCB copper area connected to it for best thermal and noise performance.
6 SEN input Negative current sense pin, with recommended operating voltage of VIN ± 0.5V and absolute maximum of VIN ± 0.7V.
1 LX output Inductor switching node; keep the PCB copper area associated with LX minimal to avoid noise problems.
4 EN input Enable and dimming control: pull high to turn on the IC, and when used for dimming keep the recommended dimming frequency between 20kHz and 1MHz, with the first pulse longer than 100ns to turn on and pulses shorter than 40ns to turn off.
3 TM input Test mode pin that must be grounded in the real application.

Key specifications

Parameter Value
Manufacturer Silergy Corp
Package SOT-23-6
Category Display Modules / LED Drivers / Display Drivers
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 2.5 30 V 3
Shutdown Current ISHDN 5 10 µA EN=0 3
Switching Frequency FSW 0.8 1 1.2 MHz 3
Current Sense Limit VIN-SEN 96 100 104 mV 3
Min Duty Cycle 10 12 % 3
Max Duty Cycle 100 % 3
Recommended input voltage, IN, LX, EN 2.5 30 V 2
Recommended SEN voltage -0.5 0.5 V Referenced to VIN (VIN ± 0.5V) 2
Recommended voltage, all other pins 0 3.6 V 2
Recommended junction temperature range TJ -40 125 °C 2
Recommended ambient temperature range TA -40 85 °C 2
Absolute maximum voltage, LX, IN, EN 33 V 2
Absolute maximum SEN voltage -0.7 0.7 V Referenced to VIN (VIN ± 0.7V) 2
Absolute maximum voltage, all other pins 4 V 2
Power dissipation PD 0.6 W TA = 25°C, SOT-23-6 2
Absolute maximum junction temperature range TJ 150 °C 2
Lead temperature (soldering) 260 °C Soldering, 10 sec 2
Storage temperature range TSTG -65 150 °C 2
Low Side Main FET RON RDS(ON)1 200 mΩ 3
Main FET Current Limit ILIM1 1.3 A 3
EN Rising Threshold VENH 1.5 V 3
EN Falling Threshold VENL 0.4 V 3
IN UVLO Rising Threshold VIN,UVLO 2.5 V 3
UVLO Hysteresis VUVLO,HYS 0.1 V 3
Thermal Shutdown Temperature TSD 150 C 3
Package thermal resistance, junction to ambient θJA 200 °C/W JEDEC 51-3 low-conductivity board, natural convection, TA = 25°C (Note 2) 2
Package thermal resistance, junction to case θJC 130 °C/W 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 1) It is desirable to maximize the PCB copper area connecting to GND pin to achieve the best thermal and noise 6

CAD (KiCad official)

  • Symbol: SY8703ABC
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.15 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sy8703abc-etched.step / sy8703abc-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sy8703abc.step / sy8703abc.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Silergy Corp datasheet (7 pp, sha256 155d67b1ab621b30, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF