component
SY8088IAAC
Public Made by Adomby adom
Silergy Corp DC-DC Converters, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,31 +32,31 @@ "number": "1", "name": "EN", "type": "input",- "description": "Enable control input. Pull high (>1.2V) to turn on the regulator; pull low (<0.4V) to shut down (ISHDN ~0.1\u00b5A). Do not leave floating. Absolute max = VIN + 0.6V."+ "description": "Enable control input. Pull high (>1.2V) to turn on the regulator; pull low (<0.4V) to shut down (ISHDN ~0.1µA). Do not leave floating. Absolute max = VIN + 0.6V." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Ground reference for the IC. Also serves as the return for the internal synchronous (low-side) MOSFET. Case position used for \u03b8JC measurement is pin 3; GND should have maximized copper for thermal performance."+ "description": "Ground reference for the IC. Also serves as the return for the internal synchronous (low-side) MOSFET. Case position used for θJC measurement is pin 3; GND should have maximized copper for thermal performance." }, { "number": "3", "name": "LX", "type": "output",- "description": "Switching node. Connect to the external inductor. Internal top/bottom power MOSFETs (260m\u03a9 / 170m\u03a9 RDS(ON)) drive this node at 1.5MHz. Also provides output auto-discharge via ~50\u03a9 RDIS when disabled. Absolute max \u22120.3V to 6.0V."+ "description": "Switching node. Connect to the external inductor. Internal top/bottom power MOSFETs (260mΩ / 170mΩ RDS(ON)) drive this node at 1.5MHz. Also provides output auto-discharge via ~50Ω RDIS when disabled. Absolute max −0.3V to 6.0V." }, { "number": "4", "name": "IN", "type": "power_in",- "description": "Supply input pin, 2.5V to 5.5V operating range (6.0V absolute max). Decouple to GND with at least a 10\u00b5F X5R (or better) ceramic capacitor placed close to the pin."+ "description": "Supply input pin, 2.5V to 5.5V operating range (6.0V absolute max). Decouple to GND with at least a 10µF X5R (or better) ceramic capacitor placed close to the pin." }, { "number": "5", "name": "FB", "type": "input",- "description": "Output feedback input. Connect to the center of an external resistor divider (RH/RL) from VOUT to GND to program the output voltage: VOUT = 0.6 \u00d7 (1 + RH/RL). Internal reference VREF = 0.6V typ. Absolute max = VIN + 0.6V."+ "description": "Output feedback input. Connect to the center of an external resistor divider (RH/RL) from VOUT to GND to program the output voltage: VOUT = 0.6 × (1 + RH/RL). Internal reference VREF = 0.6V typ. Absolute max = VIN + 0.6V." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/sy8088iaac-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }