component
SY6280AAC
Public Made by Adomby adom
Silergy Corp AC-DC Controllers and Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,31 +32,31 @@ "number": "1", "name": "OUT", "type": "power_out",- "description": "Switched output pin. Drain of the internal P-channel MOSFET; delivers current from IN when EN is high. Includes ~150\u03a9 discharge resistance to GND at shutdown. Reverse-blocking (no body diode) so OUT can be forced above IN while disabled."+ "description": "Switched output pin. Drain of the internal P-channel MOSFET; delivers current from IN when EN is high. Includes ~150Ω discharge resistance to GND at shutdown. Reverse-blocking (no body diode) so OUT can be forced above IN while disabled." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Ground reference for the device. Also serves as the case position for \u03b8JC thermal measurement."+ "description": "Ground reference for the device. Also serves as the case position for θJC thermal measurement." }, { "number": "3", "name": "ISET", "type": "input",- "description": "Current-limit programming pin. Connect a resistor RSET from ISET to GND to program the switch current limit: Ilim (A) = 6800 / RSET (\u03a9). Valid range is 0.4A to 2A."+ "description": "Current-limit programming pin. Connect a resistor RSET from ISET to GND to program the switch current limit: Ilim (A) = 6800 / RSET (Ω). Valid range is 0.4A to 2A." }, { "number": "4", "name": "EN", "type": "input",- "description": "Active-high ON/OFF control input. Pull high (VEN(H) \u2265 2V) to enable the switch; pull low (VEN(L) \u2264 0.8V) to disable. Must not be left floating. Leakage \u2264 1\u00b5A at VEN = 5.5V."+ "description": "Active-high ON/OFF control input. Pull high (VEN(H) ≥ 2V) to enable the switch; pull low (VEN(L) ≤ 0.8V) to disable. Must not be left floating. Leakage ≤ 1µA at VEN = 5.5V." }, { "number": "5", "name": "IN", "type": "power_in",- "description": "Power input pin, 2.4V to 5.5V. Source of the internal P-channel MOSFET. A 10\u00b5F ceramic bypass capacitor to GND is strongly recommended to suppress hot-plug voltage droop and input ringing during output short events. UVLO threshold ~2.3V with 0.1V hysteresis."+ "description": "Power input pin, 2.4V to 5.5V. Source of the internal P-channel MOSFET. A 10µF ceramic bypass capacitor to GND is strongly recommended to suppress hot-plug voltage droop and input ringing during output short events. UVLO threshold ~2.3V with 0.1V hysteresis." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/sy6280aac-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }