main
Ray Publish 0.1.0 ae44e6d

SX5A30.000F2010F30

Shenzhen SCTF Elec · Crystals · SMD5032-2P

SX5A30.000F2010F30 from Shenzhen SCTF Elec, in a SMD5032-2P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of a two-terminal crystal; either orientation.
2 2 passive Terminal 2 of a two-terminal crystal; either orientation.

Key specifications

Parameter Value
Manufacturer Shenzhen SCTF Elec
Package SMD5032-2P
Category Crystals, Oscillators, Resonators
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Frequency tolerance (at 25℃±2℃) △f/f -10 10 PPM at 25℃±2℃ 3
Temperature drift (over operating temp. range, reference 25℃) f_tem -30 30 PPM Over operating temp. range (reference 25℃) 3
Aging (1st year) f_age -3 3 ppm 1st year 3
Negative resistance -R 150 Ω Measured by S&A250B or equivalent, TA=25℃±2℃, RH=40%~70% 3
Insulation resistance IR 500 MΩ at DC 100V 3
Effective resistance (ESR) RR 30 Ω Fundamental mode, 30.000000 MHz 3
Shunt capacitance C0 5 pF Holder SMD5032 3
Spurious response SPDB -3 dB Spurious response, max 3
Drive level (maximum) DL 300 μW Drive level; higher may cause abnormal oscillation or damage 3
Operating temperature range T_use -40 85 ℃ Operating temperature range 3
Storage temperature range T_stg -55 125 ℃ Storage temperature range 3
Drive level (typical) DL 10 μW Typical 3
Nominal frequency f 30 MHz Fundamental 3
Load capacitance CL 20 pF Load capacitance CL 20pF 3
Frequency change after reliability tests △FL -5 5 ppm After reliability tests (drop, vibration, heat, humidity, reflow, etc.) 7

CAD (KiCad official)

  • Symbol: SX5A30.000F2010F30
  • Footprint: Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm
  • 3D model: SMD5032-2P (KiCad packages3D, STEP)
  • 3D model files: sx5a30-000f2010f30-etched.step / sx5a30-000f2010f30-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sx5a30-000f2010f30.step / sx5a30-000f2010f30.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shenzhen SCTF Elec datasheet (8 pp, sha256 ``, retrieved 2026-10-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins, primary crystal numbering (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF