component
SWPEBV33EF-100.000000D
Public Made by Adomby adom
Starwave Pre-Programmed Oscillators, SMD2016-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSWPEBV33EF-100.000000D
Starwave · Pre-Programmed Oscillators · SMD2016-4P
SWPEBV33EF-100.000000D from Starwave, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Tri-state | input | Tri-state enable/disable input: output is enabled at 0.7 x VDD or higher and disabled at 0.3 x VDD or lower. |
| 2 | GND | power_in | Ground pin; a 0.1µF by-pass capacitor should be placed as close to the part as possible between the VDD and GND pads. |
| 3 | Output | output | Clock output: high level is 90% VDD minimum and low level is 10% VDD maximum at a 15 pF load, with 2 ns typical rise/fall time at 3.3V and 2.5V and 3 ns at 1.8V. |
| 4 | VDD | power_in | Supply pin; the datasheet gives supply operation at 1.8V, 2.5V or 3.3V with a supply variation of VDD-5% to VDD+5% in the electrical specification table. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Starwave |
| Package | SMD2016-4P |
| Category | Crystal Oscillator/Oscillator/Resonator |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Range | 1 | 200 | MHz | 3.3V column | 1 | ||
| Supply Current | 35 | mA | @15pF loading, 3.3V column | 1 | |||
| Supply Voltage Variation | VDD | -5 | 5 | % | 3.3V column; printed as VDD-5% to VDD+5% | 1 | |
| Output High | 90 | %VDD | 3.3V column | 1 | |||
| Output Low | 10 | %VDD | 3.3V column | 1 | |||
| Transition Time Rise Time / Fall Time | 2 | nSec | 10% to 90% of VDD, 15pF load; 3.3V column | 1 | |||
| Duty Cycle | 45 | 55 | % | 3.3V column | 1 | ||
| Startup Time | 8 | mSec | 3.3V column | 1 | |||
| Tri-State Output Enable | 0.7 | x VDD | 3.3V column | 1 | |||
| Tri-State Output Disable | 0.3 | x VDD | 3.3V column | 1 | |||
| Stand by Current (@PD Mode) | 400 | uA | @PD mode, 3.3V column | 1 | |||
| Stand by Current (@OE Mode) | 20 | mA | @OE mode, 3.3V column; unit printed as mA | 1 | |||
| RMS Phase Jitter | 2 | pSec | 12 kHz to 20 MHz, 3.3V column | 1 | |||
| Aging | 3 | ppm | @25°C, first year, 3.3V column | 1 | |||
| Storage Temp. Range | -50 | 125 | °C | 1 | |||
| Operating Temperature Range (Industrial) | -40 | 85 | °C | Ordering code V (industrial) | 2 | ||
| Frequency Stability | -20 | 20 | ppm | Ordering code B (±20 ppm) over -40 to 85°C; derived from part-numbering table | 2 | ||
| Supply Voltage Tolerance (ordering code) | VDD | -10 | 10 | % | Ordering code 33 (3.3V ±10%) | 2 |
CAD (KiCad official)
- Symbol:
SWPEBV33EF-100.000000D - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
swpebv33ef-100-000000d-etched.step/swpebv33ef-100-000000d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);swpebv33ef-100-000000d.step/swpebv33ef-100-000000d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Starwave datasheet (2 pp, sha256
46e7f0f0394abb16, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).