component
SWPDBV33EF-80.000000D
Public Made by Adomby adom
Starwave Pre-Programmed Oscillators, SMD2520-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSWPDBV33EF-80.000000D
Starwave · Pre-Programmed Oscillators · SMD2520-4P
SWPDBV33EF-80.000000D from Starwave, in a SMD2520-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Tri-State | input | Tri-state enable pin: the output is enabled at or above 0.7 x VDD and disabled at or below 0.3 x VDD. |
| 2 | GND | power_in | Ground pin; place a 0.1 µF by-pass capacitor as close to the part as possible between the VDD and GND pads. |
| 3 | Output | output | Clock output with high level of at least 90% VDD and low level of at most 10% VDD into a 15 pF load, with rise/fall time (10% to 90% VDD) of 2 ns max at 3.3V/2.5V and 3 ns max at 1.8V. |
| 4 | VDD | power_in | Supply pin; for this MPN (suffix 33 = 3.3V) the supply must be held within ±5% of 3.3V per the electrical specification table. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Starwave |
| Package | SMD2520-4P |
| Category | Crystal Oscillator/Oscillator/Resonator |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage variation (3.3V) | -5 | 5 | % | VDD-5% to VDD+5%, 3.3V column | 1 | ||
| Frequency range (3.3V) | 1 | 200 | MHz | 3.3V column | 1 | ||
| Supply current | 35 | mA | @15pF loading, 3.3V column | 1 | |||
| Output high level | 90 | %VDD | 1 | ||||
| Output low level | 10 | %VDD | 1 | ||||
| Rise time / fall time | 2 | nSec | Measured 10% to 90% of VDD, 15pF output load, 3.3V column | 1 | |||
| Duty cycle | 45 | 55 | % | 3.3V column | 1 | ||
| Startup time | 8 | mSec | 3.3V column | 1 | |||
| Tri-state output enable | 0.7 | x VDD | 3.3V column | 1 | |||
| Tri-state output disable | 0.3 | x VDD | 3.3V column | 1 | |||
| Stand by current (PD mode) | 400 | uA | @PD mode, 3.3V column | 1 | |||
| Stand by current (OE mode) | 20 | mA | @OE mode, 3.3V column | 1 | |||
| RMS phase jitter | 2 | pSec | 12 kHz to 20 MHz, 3.3V column | 1 | |||
| Aging | 3 | ppm | @25 °C, first year, 3.3V column | 1 | |||
| Frequency stability (ordering code B) | -20 | 20 | ppm | Ordering code B = ±20 ppm; inclusive of calibration at 25 °C, operating temperature range, input voltage variation, load variation, aging (1st year), shock and vibration | 2 | ||
| Operating temperature range (ordering code V, industrial) | -40 | 85 | °C | Ordering code V (industrial) | 2 | ||
| Storage temperature range | -50 | 125 | °C | 1 |
CAD (KiCad official)
- Symbol:
SWPDBV33EF-80.000000D - Footprint:
Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm - 3D model: SMD2520-4P (KiCad packages3D, STEP)
- 3D model files:
swpdbv33ef-80-000000d-etched.step/swpdbv33ef-80-000000d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);swpdbv33ef-80-000000d.step/swpdbv33ef-80-000000d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Starwave datasheet (2 pp, sha256
77f70b5c450ced76, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).