SWPDBV33EF-100.000000D

{
  "slug": "swpdbv33ef-100-000000d",
  "version": "0.1.0",
  "type": "component",
  "description": "Starwave Pre-Programmed Oscillators, SMD2520-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "crystal oscillator-oscillator-resonator",
    "swpdbv33ef-100.000000d",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "swpdbv33ef-100-000000d.kicad_sym",
    "swpdbv33ef-100-000000d.kicad_mod",
    "swpdbv33ef-100-000000d.glb",
    "swpdbv33ef-100-000000d.step",
    "swpdbv33ef-100-000000d.lbr",
    "docs/hero.png",
    "docs/swpdbv33ef-100-000000d-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "swpdbv33ef-100-000000d-hero.glb",
    "swpdbv33ef-100-000000d-hero.overlay.json",
    "swpdbv33ef-100-000000d-etched.glb"
  ],
  "component": {
    "mpn": "SWPDBV33EF-100.000000D",
    "manufacturer": "Starwave",
    "package": "SMD2520-4P",
    "pin_count": 4,
    "category": "Crystal Oscillator/Oscillator/Resonator",
    "subcategory": "Pre-Programmed Oscillators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590316498284806144",
    "parts": {
      "symbol": "swpdbv33ef-100-000000d.kicad_sym",
      "footprint": "swpdbv33ef-100-000000d.kicad_mod",
      "model_3d": "swpdbv33ef-100-000000d-hero.glb",
      "model_3d_plain": "swpdbv33ef-100-000000d-etched.glb",
      "model_3d_step": "swpdbv33ef-100-000000d-etched.step",
      "model_3d_step_plain": "swpdbv33ef-100-000000d.step",
      "lbr": "swpdbv33ef-100-000000d.lbr"
    },
    "distributor_links": {
      "lcsc": "C5128558"
    },
    "distributor_check": {
      "checked_at": "2026-10-16T04:32:29Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "Tri-State",
        "type": "input",
        "description": "Output enable input: the output is enabled when held at or above 0.7 x VDD and disabled when held at or below 0.3 x VDD."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pad; a 0.1 µF by-pass capacitor should be placed as close to the part as possible between the VDD and GND pads for optimal oscillator performance."
      },
      {
        "number": "3",
        "name": "Output",
        "type": "output",
        "description": "Clock output with high level at least 90% of VDD and low level at most 10% of VDD, with 10%-90% rise/fall time of 2 ns at 3.3 V (3 ns at 1.8 V) into a 15 pF load."
      },
      {
        "number": "4",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage pin for 1.8 V, 2.5 V or 3.3 V operation, with supply variation of ±5% of the nominal VDD per the electrical specification."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The top/bottom view drawing labels (#1 to #4) are garbled in the extracted text, so the physical pos; The electrical table gives the Tri-State pin as enable/disable for the output, and the MPN carries t; The MPN's supply code '33' indicates 3.3 V, and the ordering section specifies ±10% while the electr"
        ],
        "pages_sent": 2,
        "cost_usd": 0.018,
        "at": "2026-10-16T04:32:15"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590316498284806144",
        "pages": 2,
        "sha256": "77f70b5c450ced76",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 4,
        "described": 4,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "swpdbv33ef-100-000000d.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          2.0,
          0.83
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "cd0c53e8a35a3cb36fc18e5248a2acf382b94b62d156b7bb9cc398eef3e21c4a",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "swpdbv33ef-100-000000d-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.5,
          2.0,
          0.83
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f26b70f9460e5e21c3fab8d48f34f10dcecc654fd1f5b2292c2b3395f96dc635",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}