component
STSPIN233
Public Made by Adomby adom
STMicroelectronics Gate Drivers, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
stspin233: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
590f1eb
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231
{
"slug": "stspin233",
"version": "0.1.0",
"type": "component",
"description": "STMicroelectronics Gate Drivers, QFN-16-EP(3x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"motor driver ics",
"stspin233",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"stspin233.kicad_sym",
"stspin233.kicad_mod",
"stspin233.glb",
"stspin233.step",
"stspin233.lbr",
"docs/hero.png",
"docs/stspin233-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"component": {
"mpn": "STSPIN233",
"manufacturer": "STMicroelectronics",
"package": "QFN-16-EP(3x3)",
"pin_count": 17,
"category": "Motor Driver ICs",
"subcategory": "Gate Drivers",
"datasheet": "https://www.st.com/resource/en/datasheet/stspin233.pdf",
"parts": {
"symbol": "stspin233.kicad_sym",
"footprint": "stspin233.kicad_mod",
"model_3d": "stspin233-etched.glb",
"model_3d_plain": "stspin233.glb",
"model_3d_step": "stspin233-etched.step",
"model_3d_step_plain": "stspin233.step",
"lbr": "stspin233.lbr"
},
"distributor_links": {
"lcsc": "C2653468"
},
"pins": [
{
"number": "1",
"name": "INU",
"type": "input",
"description": "Logic input driving the U half-bridge output state (5V max logic input, VIH min 1.6V / VIL max 0.6V per Table 5)."
},
{
"number": "2",
"name": "ENU",
"type": "input",
"description": "Logic input enabling the U half-bridge output; when low the U output is forced high impedance (per Table 8 truth table)."
},
{
"number": "3",
"name": "OUTU",
"type": "output",
"description": "Power bridge output U, driving the motor phase U with continuous output current rating up to 1.3 Arms."
},
{
"number": "4",
"name": "SENSEU",
"type": "passive",
"description": "Sense output of bridge U for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings."
},
{
"number": "5",
"name": "VS",
"type": "power_in",
"description": "Device supply voltage input; recommended operating range 1.8 V to 10 V (absolute maximum -0.3 V to 11 V)."
},
{
"number": "6",
"name": "GND",
"type": "power_in",
"description": "Device ground reference pin."
},
{
"number": "7",
"name": "OUTV",
"type": "output",
"description": "Power bridge output V, driving the motor phase V with continuous output current rating up to 1.3 Arms."
},
{
"number": "8",
"name": "SENSEV",
"type": "passive",
"description": "Sense output of bridge V for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings."
},
{
"number": "9",
"name": "SENSEW",
"type": "passive",
"description": "Sense output of bridge W for three-shunt current sensing; sense pin voltage range is -1 V to 1 V per absolute maximum ratings."
},
{
"number": "10",
"name": "OUTW",
"type": "output",
"description": "Power bridge output W, driving the motor phase W with continuous output current rating up to 1.3 Arms."
},
{
"number": "11",
"name": "INW",
"type": "input",
"description": "Logic input driving the W half-bridge output state."
},
{
"number": "12",
"name": "ENW",
"type": "input",
"description": "Logic input enabling the W half-bridge output; when low the W output is forced high impedance."
},
{
"number": "13",
"name": "EN\\FAULT",
"type": "bidirectional",
"description": "5V-compliant logic input and open-drain output; when driven low it disables the power stage, and it is internally forced low through an open-drain MOSFET when an overcurrent, short-circuit, or thermal-shutdown fault occurs."
},
{
"number": "14",
"name": "STBY\\RESET",
"type": "input",
"description": "5V-compliant logic input; forcing it below VSTBYL (max 0.9 V) places the device in low-consumption standby mode, cutting supply to control circuitry, while VSTBYH (min 1.48 V) exits standby."
},
{
"number": "15",
"name": "INV",
"type": "input",
"description": "Logic input driving the V half-bridge output state."
},
{
"number": "16",
"name": "ENV",
"type": "input",
"description": "Logic input enabling the V half-bridge output; when low the V output is forced high impedance."
},
{
"number": "17",
"name": "EPAD",
"type": "power_in",
"description": "Exposed pad on the package underside; per the pin connection note it must be connected to ground for proper thermal and electrical operation."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"exposed pad 17 added from the footprint"
],
"pages_sent": 22,
"cost_usd": 0.2146,
"at": "2026-09-23T04:58:55"
},
"datasheet": {
"url": "https://www.st.com/resource/en/datasheet/stspin233.pdf",
"pages": 22,
"sha256": "cb2b256b8aecd894",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "stspin233.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "stspin233-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "63a111cb73caf348f831a7521632a1ad7be15bc9b8f539c05069d69c95619c49",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}