Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

STMPS2171STR

STMicroelectronics · Power Distribution Switches · SOT-23-5

STMPS2171STR from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT output Switched power output from the high-side MOSFET, rated to supply 1000 mA continuous current with 90 mΩ typical on-resistance.
2 GND power_in Ground reference.
3 FAULT tri_state Open drain fault indicator output, active low after fault blanking when thermal shutdown, UVLO, or overcurrent condition occurs.
4 EN input Active high enable input for the power switch, accepts CMOS and TTL compatible logic levels.
5 IN power_in Power supply input, 2.7 to 5.5 V recommended operating range.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: STMPS2171STR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: stmps2171str-etched.step / stmps2171str-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stmps2171str.step / stmps2171str.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (37 pp, sha256 700138497f100d55, retrieved 2026-09-26, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF