main
Ray
Publish 0.1.0
3819c65
STMPE811QTR
STMicroelectronics · Touch Sensors · QFN-16-EP(3x3)
STMPE811QTR from STMicroelectronics, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Y- | bidirectional | Touchscreen Y- driver pin that can also be configured as GPIO-7 or ADC input depending on the GPIO_AF and TSC control bits. |
| 2 | INT | output | Interrupt output in the VCC domain, implemented as an open-drain pin. |
| 3 | A0/Data Out | bidirectional | I2C address select input during reset and data output in SPI mode, in the VCC domain. |
| 4 | SCLK | input | I2C or SPI clock input in the VCC domain. |
| 5 | SDAT | bidirectional | I2C data line or SPI chip-select input in the VCC domain. |
| 6 | VCC | power_in | Supply voltage of 1.8 to 3.3 V. |
| 7 | Data in | input | SPI data input in the VCC domain. |
| 8 | IN0 | bidirectional | ADC input channel 0 that can also be configured as GPIO-0. |
| 9 | IN1/GPIO-1/MODE | bidirectional | ADC input channel 1 or GPIO-1; during reset it selects the serial interface, with 0 for I2C and 1 for SPI. |
| 10 | GND | power_in | Ground reference for the device. |
| 11 | IN2 | bidirectional | ADC input channel 2 or GPIO-2, and external ADC reference + when configured for that function. |
| 12 | IN3 | bidirectional | ADC input channel 3 or GPIO-3, and external ADC reference - when configured for that function. |
| 13 | X+ | bidirectional | Touchscreen X+ driver pin that can also be configured as GPIO-4 or ADC input. |
| 14 | Vio | power_in | Supply for the touchscreen driver and GPIO pins. |
| 15 | Y+ | bidirectional | Touchscreen Y+ driver pin that can also be configured as GPIO-5 or ADC input. |
| 16 | X- | bidirectional | Touchscreen X- driver pin that can also be configured as GPIO-6 or ADC input. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | QFN-16-EP(3x3) |
| Category | Sensors |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 4.5 | V | 54 | |||
| GPIO supply voltage | VIO | 4.5 | V | 54 | |||
| ESD protection on each GPIO pin | ESD | 4 | kV | air discharge | 54 | ||
| Operating temperature | T | -40 | 85 | °C | 54 | ||
| Storage temperature | TSTG | -65 | 155 | °C | 54 | ||
| I/O supply voltage (Vcc row) | Vcc | 1.65 | 3.6 | V | Vio >= Vcc | 55 | |
| Core supply voltage | VIO | 1.65 | 3.6 | V | 55 | ||
| Core supply current active | ICC-active | 0.5 | 1 | µA | Touchscreen controller at 100 Hz sampling; VCC = 1.8 − 3.3 V | 55 | |
| I/O supply current active | IIO-active | 0.8 | 1.2 | mA | Touchscreen controller at 100 Hz sampling; VIO = 1.8 V | 55 | |
| I/O supply current active | IIO-active | 2 | 2.8 | mA | Touchscreen controller at 100 Hz sampling; VIO = 3.3 V | 55 | |
| Core supply current hibernate | ICC-hibernate | 0.5 | 1 | µA | Hibernate state, no I2C/SPI activity; VCC = 1.8 V | 55 | |
| I/O supply current hibernate | IIO-hibernate | 0.5 | 1 | µA | Hibernate state, no I2C/SPI activity; VIO = 1.8 − 3.3 V | 55 | |
| I/O supply current hibernate | IIO-hibernate | 1 | 3 | µA | Hibernate state, no I2C/SPI activity; VIO = 3.3 V | 55 | |
| Input voltage low state | VIL | -0.3 | V | VIO = 1.8 − 3.3 V | 56 | ||
| Output voltage low state | VOL | -0.3 | V | VIO = 1.8 V, IOL = 4 mA | 56 | ||
| Output voltage low state (I2C/SPI) | VOL (I2C/SPI) | -0.3 | V | VCC = 1.8 V, IOL = 4 mA | 56 | ||
| I2C maximum SCLK | CLKI2Cmax | 400 | kHz | VIO = 1.8 - 3.3 V | 56 | ||
| SPI maximum clock | CLKSPImax | 800 | kHz | VIO = 1.8 V | 56 | ||
| SPI maximum clock | CLKSPImax | 1000 | kHz | VIO = 3.3 V | 56 | ||
| Full-scale input span | 0 | V | 57 | ||||
| Integral linearity error | -4 | 4 | Bits | 57 | |||
| Offset error | -5 | 5 | LSB | 57 | |||
| Gain error | 14 | 18 | LSB | 57 | |||
| No missing codes | 11 | Bits | 57 | ||||
| Drive current | 50 | mA | Duration 100 ms | 57 | |||
| Input capacitance | 25 | pF | 57 | ||||
| Leakage current | 0.1 | µA | 57 | ||||
| Resolution | 12 | Bits | 57 | ||||
| Noise | 70 | µVrms | Including internal Vref | 57 | |||
| Power supply rejection ratio | 50 | dB | 57 | ||||
| Throughput rate | 180 | ksps | 57 | ||||
| ON resistance X+, Y+ | 5.5 | Ω | 57 | ||||
| ON resistance X-, Y- | 7.3 | Ω | 57 | ||||
| Thermal resistance junction-ambient | TJ | 96 | °C/W | 54 |
CAD (KiCad official)
- Symbol:
STMPE811QTR - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
stmpe811qtr-etched.step/stmpe811qtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stmpe811qtr.step/stmpe811qtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (65 pp, sha256
ab884e8a7437535f, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STMPE811QTR
**STMicroelectronics** · Touch Sensors · QFN-16-EP(3x3)
STMPE811QTR from STMicroelectronics, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Y- | bidirectional | Touchscreen Y- driver pin that can also be configured as GPIO-7 or ADC input depending on the GPIO_AF and TSC control bits. |
| 2 | INT | output | Interrupt output in the VCC domain, implemented as an open-drain pin. |
| 3 | A0/Data Out | bidirectional | I2C address select input during reset and data output in SPI mode, in the VCC domain. |
| 4 | SCLK | input | I2C or SPI clock input in the VCC domain. |
| 5 | SDAT | bidirectional | I2C data line or SPI chip-select input in the VCC domain. |
| 6 | VCC | power_in | Supply voltage of 1.8 to 3.3 V. |
| 7 | Data in | input | SPI data input in the VCC domain. |
| 8 | IN0 | bidirectional | ADC input channel 0 that can also be configured as GPIO-0. |
| 9 | IN1/GPIO-1/MODE | bidirectional | ADC input channel 1 or GPIO-1; during reset it selects the serial interface, with 0 for I2C and 1 for SPI. |
| 10 | GND | power_in | Ground reference for the device. |
| 11 | IN2 | bidirectional | ADC input channel 2 or GPIO-2, and external ADC reference + when configured for that function. |
| 12 | IN3 | bidirectional | ADC input channel 3 or GPIO-3, and external ADC reference - when configured for that function. |
| 13 | X+ | bidirectional | Touchscreen X+ driver pin that can also be configured as GPIO-4 or ADC input. |
| 14 | Vio | power_in | Supply for the touchscreen driver and GPIO pins. |
| 15 | Y+ | bidirectional | Touchscreen Y+ driver pin that can also be configured as GPIO-5 or ADC input. |
| 16 | X- | bidirectional | Touchscreen X- driver pin that can also be configured as GPIO-6 or ADC input. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | QFN-16-EP(3x3) |
| Category | Sensors |
| Pins | 17 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | | | 4.5 | V | | 54 |
| GPIO supply voltage | VIO | | | 4.5 | V | | 54 |
| ESD protection on each GPIO pin | ESD | | | 4 | kV | air discharge | 54 |
| Operating temperature | T | -40 | | 85 | °C | | 54 |
| Storage temperature | TSTG | -65 | | 155 | °C | | 54 |
| I/O supply voltage (Vcc row) | Vcc | 1.65 | | 3.6 | V | Vio >= Vcc | 55 |
| Core supply voltage | VIO | 1.65 | | 3.6 | V | | 55 |
| Core supply current active | ICC-active | | 0.5 | 1 | µA | Touchscreen controller at 100 Hz sampling; VCC = 1.8 − 3.3 V | 55 |
| I/O supply current active | IIO-active | | 0.8 | 1.2 | mA | Touchscreen controller at 100 Hz sampling; VIO = 1.8 V | 55 |
| I/O supply current active | IIO-active | | 2 | 2.8 | mA | Touchscreen controller at 100 Hz sampling; VIO = 3.3 V | 55 |
| Core supply current hibernate | ICC-hibernate | | 0.5 | 1 | µA | Hibernate state, no I2C/SPI activity; VCC = 1.8 V | 55 |
| I/O supply current hibernate | IIO-hibernate | | 0.5 | 1 | µA | Hibernate state, no I2C/SPI activity; VIO = 1.8 − 3.3 V | 55 |
| I/O supply current hibernate | IIO-hibernate | | 1 | 3 | µA | Hibernate state, no I2C/SPI activity; VIO = 3.3 V | 55 |
| Input voltage low state | VIL | -0.3 | | | V | VIO = 1.8 − 3.3 V | 56 |
| Output voltage low state | VOL | -0.3 | | | V | VIO = 1.8 V, IOL = 4 mA | 56 |
| Output voltage low state (I2C/SPI) | VOL (I2C/SPI) | -0.3 | | | V | VCC = 1.8 V, IOL = 4 mA | 56 |
| I2C maximum SCLK | CLKI2Cmax | 400 | | | kHz | VIO = 1.8 - 3.3 V | 56 |
| SPI maximum clock | CLKSPImax | 800 | | | kHz | VIO = 1.8 V | 56 |
| SPI maximum clock | CLKSPImax | 1000 | | | kHz | VIO = 3.3 V | 56 |
| Full-scale input span | | 0 | | | V | | 57 |
| Integral linearity error | | -4 | | 4 | Bits | | 57 |
| Offset error | | -5 | | 5 | LSB | | 57 |
| Gain error | | | 14 | 18 | LSB | | 57 |
| No missing codes | | 11 | | | Bits | | 57 |
| Drive current | | | | 50 | mA | Duration 100 ms | 57 |
| Input capacitance | | | 25 | | pF | | 57 |
| Leakage current | | | 0.1 | | µA | | 57 |
| Resolution | | | 12 | | Bits | | 57 |
| Noise | | | 70 | | µVrms | Including internal Vref | 57 |
| Power supply rejection ratio | | | 50 | | dB | | 57 |
| Throughput rate | | | 180 | | ksps | | 57 |
| ON resistance X+, Y+ | | | 5.5 | | Ω | | 57 |
| ON resistance X-, Y- | | | 7.3 | | Ω | | 57 |
| Thermal resistance junction-ambient | TJ | | 96 | | °C/W | | 54 |
## CAD (KiCad official)
- Symbol: `STMPE811QTR`
- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`
- 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files: `stmpe811qtr-etched.step` / `stmpe811qtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stmpe811qtr.step` / `stmpe811qtr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stmpe811qtr.pdf) (65 pp, sha256 `ab884e8a7437535f`, retrieved 2026-11-06, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stmpe811qtr-datasheet.pdf)