← Commit history

stm8s903k3t6c: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·69b9d99729 · ·parent 730fc42
2 files changed +96−16
package.json+54−14
@@ -68,13 +68,13 @@         "number": "1",         "name": "NRST",         "type": "input",-        "description": "Reset input with internal 30-80k\u03a9 weak pull-up resistor (55k\u03a9 typical), 75ns schmitt trigger filter, and open-drain output capability to drive output low at 0.5V (3mA max)."+        "description": "Reset input with internal 30-80kΩ weak pull-up resistor (55kΩ typical), 75ns schmitt trigger filter, and open-drain output capability to drive output low at 0.5V (3mA max)."       },       {         "number": "2",         "name": "PA1/OSCIN",         "type": "bidirectional",-        "description": "Port A1 GPIO or 1-16MHz HSE oscillator/external clock input with \u00b11\u00b5A leakage current; automatically configured as input weak pull-up during reset and halt modes."+        "description": "Port A1 GPIO or 1-16MHz HSE oscillator/external clock input with ±1µA leakage current; automatically configured as input weak pull-up during reset and halt modes."       },       {         "number": "3",@@ -92,7 +92,7 @@         "number": "5",         "name": "VCAP",         "type": "passive",-        "description": "External capacitor connection point for 1.8V on-chip voltage regulator requiring 470-3300nF with ESR <0.3\u03a9 and ESL <15nH."+        "description": "External capacitor connection point for 1.8V on-chip voltage regulator requiring 470-3300nF with ESR <0.3Ω and ESL <15nH."       },       {         "number": "6",@@ -146,19 +146,19 @@         "number": "14",         "name": "PB2/AIN2/TIM1_CH3N",         "type": "bidirectional",-        "description": "Port B2 high-sink GPIO; analog input channel AIN2 (0-VDD range) with \u00b12LSB typical accuracy at fADC=4MHz; Timer1 inverted channel 3 complementary output."+        "description": "Port B2 high-sink GPIO; analog input channel AIN2 (0-VDD range) with ±2LSB typical accuracy at fADC=4MHz; Timer1 inverted channel 3 complementary output."       },       {         "number": "15",         "name": "PB1/AIN1/TIM1_CH2N",         "type": "bidirectional",-        "description": "Port B1 high-sink GPIO; analog input channel AIN1 (0-VDD range) with \u00b12LSB typical accuracy at fADC=4MHz; Timer1 inverted channel 2 complementary output."+        "description": "Port B1 high-sink GPIO; analog input channel AIN1 (0-VDD range) with ±2LSB typical accuracy at fADC=4MHz; Timer1 inverted channel 2 complementary output."       },       {         "number": "16",         "name": "PB0/AIN0/TIM1_CH1N",         "type": "bidirectional",-        "description": "Port B0 high-sink GPIO; analog input channel AIN0 (0-VDD range) with \u00b12LSB typical accuracy at fADC=4MHz; Timer1 inverted channel 1 complementary output."+        "description": "Port B0 high-sink GPIO; analog input channel AIN0 (0-VDD range) with ±2LSB typical accuracy at fADC=4MHz; Timer1 inverted channel 1 complementary output."       },       {         "number": "17",@@ -188,7 +188,7 @@         "number": "21",         "name": "PC4/TIM1_CH4/CLK_CCO/AIN2/[TIM1_CH2N]",         "type": "bidirectional",-        "description": "Port C4 high-sink GPIO (10mA @ 2.1V, 20mA @ 3.3V source); Timer1 channel 4 output; configurable clock output (HSI/HSE/fMASTER\u00f72); analog input AIN2; Timer1 inverted CH2 via AFR7."+        "description": "Port C4 high-sink GPIO (10mA @ 2.1V, 20mA @ 3.3V source); Timer1 channel 4 output; configurable clock output (HSI/HSE/fMASTER÷2); analog input AIN2; Timer1 inverted CH2 via AFR7."       },       {         "number": "22",@@ -206,7 +206,7 @@         "number": "24",         "name": "PC7/SPI_MISO[TIM1_CH2]",         "type": "bidirectional",-        "description": "Port C7 high-sink GPIO; SPI master-in/slave-out data line (0-8Mbps) with 3\u00d7tMASTER max access time from SCK rising edge; Timer1 channel 2 via AFR0 remapping."+        "description": "Port C7 high-sink GPIO; SPI master-in/slave-out data line (0-8Mbps) with 3×tMASTER max access time from SCK rising edge; Timer1 channel 2 via AFR0 remapping."       },       {         "number": "25",@@ -224,13 +224,13 @@         "number": "27",         "name": "PD2/AIN3/[TIM5_CH3]",         "type": "bidirectional",-        "description": "Port D2 high-sink GPIO; analog input channel AIN3 (0-VDD range) with \u00b12LSB typical accuracy at fADC=4MHz; Timer5 channel 3 via AFR2 or AFR1 remapping."+        "description": "Port D2 high-sink GPIO; analog input channel AIN3 (0-VDD range) with ±2LSB typical accuracy at fADC=4MHz; Timer5 channel 3 via AFR2 or AFR1 remapping."       },       {         "number": "28",         "name": "PD3/AIN4/TIM5_CH2/ADC_ETR",         "type": "bidirectional",-        "description": "Port D3 high-sink GPIO; analog input channel AIN4 (0-VDD range) with \u00b12LSB typical accuracy; Timer5 channel 2 output; ADC external trigger input."+        "description": "Port D3 high-sink GPIO; analog input channel AIN4 (0-VDD range) with ±2LSB typical accuracy; Timer5 channel 2 output; ADC external trigger input."       },       {         "number": "29",@@ -242,13 +242,13 @@         "number": "30",         "name": "PD5/AIN5/UART1_TX",         "type": "bidirectional",-        "description": "Port D5 high-sink GPIO; analog input channel AIN5 (0-VDD range) with \u00b12LSB typical accuracy; UART1 transmit data output (NRZ format, 1Mbps max)."+        "description": "Port D5 high-sink GPIO; analog input channel AIN5 (0-VDD range) with ±2LSB typical accuracy; UART1 transmit data output (NRZ format, 1Mbps max)."       },       {         "number": "31",         "name": "PD6/AIN6/UART1_RX",         "type": "bidirectional",-        "description": "Port D6 high-sink GPIO; analog input channel AIN6 (0-VDD range) with \u00b12LSB typical accuracy; UART1 receive data input (NRZ format, 1Mbps max)."+        "description": "Port D6 high-sink GPIO; analog input channel AIN6 (0-VDD range) with ±2LSB typical accuracy; UART1 receive data input (NRZ format, 1Mbps max)."       },       {         "number": "32",@@ -291,6 +291,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "stm8s903k3t6c.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.0,+          9.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "be0e412f1c66fee70039b0e109e0cc7c823161dda97593718afa97569bc61ce3",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "stm8s903k3t6c-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.0,+          9.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a228485975e7e825fec1179e000b5ed09c2ae96fbeb48747bcdc4411f3cc7959",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -276,7 +276,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "stm8s903k3t6c.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.0,+          9.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "be0e412f1c66fee70039b0e109e0cc7c823161dda97593718afa97569bc61ce3",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "stm8s903k3t6c-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          9.0,+          9.0,+          1.5+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a228485975e7e825fec1179e000b5ed09c2ae96fbeb48747bcdc4411f3cc7959",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -323,4 +363,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}