component

STM8S208RBT3

Public Made by Adom

by adom

STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentembedded processors & controllersstm8s208rbt3factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

STM8S208RBT3

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)

STM8S208RBT3 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NRST bidirectional Reset pin (I/O); its reset-state behaviour and electrical limits are given in the NRST / reset pin characteristics section.
2 PA1/OSCIN bidirectional Port A1 doubles as the resonator/crystal oscillator input (OSCIN) with slow-speed output capability (O1, up to 2 MHz).
3 PA2/OSCOUT bidirectional Port A2 doubles as the resonator/crystal oscillator output (OSCOUT) with slow-speed output capability (O1, up to 2 MHz).
4 VSSIO_1 power_in I/O ground.
5 VSS power_in Digital ground.
6 VCAP power_in 1.8 V regulator capacitor pin; an external capacitor is required as specified in the VCAP external capacitor section.
7 VDD power_in Digital power supply.
8 VDDIO_1 power_in I/O power supply.
9 PA3/TIM2_CH3 bidirectional Port A3 with default alternate function TIM2 channel 3; alternate function after remap is TIM3_CH1 (AFR1 option bit), slow-speed output (O1).
10 PA4/UART1_RX bidirectional Port A4 used as UART1 receive, high sink capable (HS) with speed O3; its default state is controlled by the ROM bootloader (pulled up during bootloader activation, returned to floating before bootloader exit).
11 PA5/UART1_TX bidirectional Port A5 used as UART1 transmit, high sink capable (HS) with speed O3.
12 PA6/UART1_CK bidirectional Port A6 used as UART1 synchronous clock, high sink capable (HS) with speed O3.
13 PF7/AIN15 bidirectional Port F7 with ADC analog input 15, slow-speed output (O1).
14 PF6/AIN14 bidirectional Port F6 with ADC analog input 14, slow-speed output (O1).
15 PF5/AIN13 bidirectional Port F5 with ADC analog input 13, slow-speed output (O1).
16 PF4/AIN12 bidirectional Port F4 with ADC analog input 12, slow-speed output (O1).
17 PF3/AIN11 bidirectional Port F3 with ADC analog input 11, slow-speed output (O1).
18 VREF+ power_in ADC positive reference voltage.
19 VDDA power_in Analog power supply.
20 VSSA power_in Analog ground.
21 VREF- power_in ADC negative reference voltage.
22 PF0/AIN10 bidirectional Port F0 with ADC analog input 10, slow-speed output (O1).
23 PB7/AIN7 bidirectional Port B7 with ADC analog input 7, slow-speed output (O1).
24 PB6/AIN6 bidirectional Port B6 with ADC analog input 6, slow-speed output (O1).
25 PB5/AIN5 bidirectional Port B5 with ADC analog input 5; I2C_SDA is available as a remapped alternate function (AFR6).
26 PB4/AIN4 bidirectional Port B4 with ADC analog input 4; I2C_SCL is available as a remapped alternate function (AFR6).
27 PB3/AIN3 bidirectional Port B3 with ADC analog input 3; TIM1_ETR is available as a remapped alternate function (AFR5).
28 PB2/AIN2 bidirectional Port B2 with ADC analog input 2; TIM1_CH3N is available as a remapped alternate function (AFR5).
29 PB1/AIN1 bidirectional Port B1 with ADC analog input 1; TIM1_CH2N is available as a remapped alternate function (AFR5).
30 PB0/AIN0 bidirectional Port B0 with ADC analog input 0; TIM1_CH1N is available as a remapped alternate function (AFR5).
31 PE7/AIN8 bidirectional Port E7 with ADC analog input 8, slow-speed output (O1).
32 PE6/AIN9 bidirectional Port E6 with ADC analog input 9, slow-speed output (O1).
33 PE5/SPI_NSS bidirectional Port E5 used as SPI master/slave select, slow-speed output (O1).
34 PC1/TIM1_CH1 bidirectional Port C1 used as Timer 1 channel 1, high sink capable (HS) with speed O3.
35 PC2/TIM1_CH2 bidirectional Port C2 used as Timer 1 channel 2, high sink capable (HS) with speed O3.
36 PC3/TIM1_CH3 bidirectional Port C3 used as Timer 1 channel 3, high sink capable (HS) with speed O3.
37 PC4/TIM1_CH4 bidirectional Port C4 used as Timer 1 channel 4, high sink capable (HS) with speed O3.
38 PC5/SPI_SCK bidirectional Port C5 used as SPI clock, high sink capable (HS) with speed O3.
39 VSSIO_2 power_in I/O ground.
40 VDDIO_2 power_in I/O power supply.
41 PC6/SPI_MOSI bidirectional Port C6 used as SPI master out / slave in, high sink capable (HS) with speed O3.
42 PC7/SPI_MISO bidirectional Port C7 used as SPI master in / slave out, high sink capable (HS) with speed O3.
43 PG0/CAN_TX bidirectional Port G0 used as beCAN transmit (available on STM8S208xx devices only), slow-speed output (O1).
44 PG1/CAN_RX bidirectional Port G1 used as beCAN receive (available on STM8S208xx devices only), slow-speed output (O1).
45 PG2 bidirectional Port G2 general-purpose I/O with slow-speed output (O1).
46 PG3 bidirectional Port G3 general-purpose I/O with slow-speed output (O1).
47 PG4 bidirectional Port G4 general-purpose I/O with slow-speed output (O1).
48 PI0 bidirectional Port I0 general-purpose I/O with slow-speed output (O1).
49 PG5 bidirectional Port G5 general-purpose I/O with slow-speed output (O1).
50 PG6 bidirectional Port G6 general-purpose I/O with slow-speed output (O1).
51 PG7 bidirectional Port G7 general-purpose I/O with slow-speed output (O1).
52 PE4 bidirectional Port E4 general-purpose I/O with slow-speed output (O1).
53 PE3/TIM1_BKIN bidirectional Port E3 used as Timer 1 break input, slow-speed output (O1).
54 PE2/I2C_SDA bidirectional Port E2 used as I2C data; a true open-drain pin (P-buffer, weak pull-up and protection diode to VDD not implemented).
55 PE1/I2C_SCL bidirectional Port E1 used as I2C clock; a true open-drain pin (P-buffer, weak pull-up and protection diode to VDD not implemented).
56 PE0/CLK_CCO bidirectional Port E0 used as configurable clock output, high sink capable (HS) with speed O3.
57 PD0/TIM3_CH2 bidirectional Port D0 used as Timer 3 channel 2, high sink capable (HS) with speed O3; remap options are TIM1_BKIN (AFR3) and CLK_CCO (AFR2).
58 PD1/SWIM bidirectional Port D1 used as SWIM data interface, high sink capable (HS); it is in input pull-up during the reset phase and after internal reset release.
59 PD2/TIM3_CH1 bidirectional Port D2 used as Timer 3 channel 1, high sink capable (HS) with speed O3; remap option is TIM2_CH3 (AFR1).
60 PD3/TIM2_CH2 bidirectional Port D3 used as Timer 2 channel 2, high sink capable (HS) with speed O3; remap option is ADC_ETR (AFR0).
61 PD4/TIM2_CH1/BEEP bidirectional Port D4 used as Timer 2 channel 1, high sink capable (HS) with speed O3; remap option is BEEP output (AFR7).
62 PD5/UART3_TX bidirectional Port D5 used as UART3 data transmit, slow-speed output (O1).
63 PD6/UART3_RX bidirectional Port D6 used as UART3 data receive; its default state is controlled by the ROM bootloader (pulled up during bootloader activation, returned to floating before bootloader exit).
64 PD7/TLI bidirectional Port D7 used as top level interrupt, slow-speed output (O1); remap option is TIM1_CH4 (AFR4), available on the 44-pin package only.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-64(10x10)
Category Embedded Processors & Controllers
Pins 64

CAD (KiCad official)

  • Symbol: STM8S208RBT3
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: stm8s208rbt3-etched.step / stm8s208rbt3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm8s208rbt3.step / stm8s208rbt3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (117 pp, sha256 7adeaa849cf9e22f, retrieved 2026-10-08, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF