component
STM8S207RBT6
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+100@@ -0,0 +1,100 @@+# STM8S207RBT6++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-64(10x10)++STM8S207RBT6 from STMicroelectronics, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NRST | input | Reset pin with internal pull-up resistor that triggers device reset when pulled low |+| 2 | PA1/OSCIN | input | Port A1 or crystal oscillator input supporting 1-24 MHz external clock |+| 3 | PA2/OSCOUT | output | Port A2 or crystal oscillator feedback output for oscillator circuit |+| 4 | VSSIO_1 | power_in | I/O power supply ground pin |+| 5 | VSS | power_in | Digital ground pin |+| 6 | VCAP | passive | 1.8V regulator capacitor pin requiring 470-3300 nF external capacitor with ESR ≤ 0.3 Ω |+| 7 | VDD | power_in | Digital power supply pin (2.95-5.5 V) |+| 8 | VDDIO_1 | power_in | I/O power supply pin (2.95-5.5 V) |+| 9 | PA3/TIM2_CH3 | bidirectional | Port A3 GPIO or Timer 2 channel 3 output, can be remapped to TIM3_CH1 |+| 10 | PA4/UART1_RX | input | Port A4 or UART1 receive input with pull-up, controlled by bootloader |+| 11 | PA5/UART1_TX | output | Port A4 or UART1 transmit output |+| 12 | PA6/UART1_CK | output | Port A6 or UART1 synchronous clock output |+| 13 | PF7/AIN15 | input | Port F7 or analog input 15 (0 to VDDA voltage range) |+| 14 | PF6/AIN14 | input | Port F6 or analog input 14 (0 to VDDA voltage range) |+| 15 | PF5/AIN13 | input | Port F5 or analog input 13 (0 to VDDA voltage range) |+| 16 | PF4/AIN12 | input | Port F4 or analog input 12 (0 to VDDA voltage range) |+| 17 | PF3/AIN11 | input | Port F3 or analog input 11 (0 to VDDA voltage range) |+| 18 | VREF+ | power_in | ADC positive reference voltage (2.75-VDDA V) |+| 19 | VDDA | power_in | Analog power supply pin (3-5.5 V) |+| 20 | VSSA | power_in | Analog ground pin |+| 21 | VREF- | power_in | ADC negative reference voltage (VSSA-0.5 V) |+| 22 | PF0/AIN10 | input | Port F0 or analog input 10 (0 to VDDA voltage range) |+| 23 | PB7/AIN7 | input | Port B7 or analog input 7 (0 to VDDA voltage range) |+| 24 | PB6/AIN6 | input | Port B6 or analog input 6 (0 to VDDA voltage range) |+| 25 | PB5/AIN5 | input | Port B5 or analog input 5 or I2C data line (SDA) when remapped |+| 26 | PB4/AIN4 | input | Port B4 or analog input 4 or I2C clock line (SCL) when remapped |+| 27 | PB3/AIN3 | input | Port B3 or analog input 3 or Timer 1 external trigger input when remapped |+| 28 | PB2/AIN2 | input | Port B2 or analog input 2 or Timer 1 channel 3 complement output when remapped |+| 29 | PB1/AIN1 | input | Port B1 or analog input 1 or Timer 1 channel 2 complement output when remapped |+| 30 | PB0/AIN0 | input | Port B0 or analog input 0 or Timer 1 channel 1 complement output when remapped |+| 31 | PE7/AIN8 | input | Port E7 or analog input 8 (0 to VDDA voltage range) |+| 32 | PE6/AIN9 | input | Port E6 or analog input 9 (0 to VDDA voltage range) |+| 33 | PE5/SPI_NSS | bidirectional | Port E5 or SPI master/slave select signal |+| 34 | PC1/TIM1_CH1 | output | Port C1 or Timer 1 channel 1 output with high-sink capability |+| 35 | PC2/TIM1_CH2 | output | Port C2 or Timer 1 channel 2 output with high-sink capability |+| 36 | PC3/TIM1_CH3 | output | Port C3 or Timer 1 channel 3 output with high-sink capability |+| 37 | PC4/TIM1_CH4 | output | Port C4 or Timer 1 channel 4 output with high-sink capability |+| 38 | PC5/SPI_SCK | output | Port C5 or SPI serial clock output with high-sink capability |+| 39 | VSSIO_2 | power_in | I/O power supply ground pin |+| 40 | VDDIO_2 | power_in | I/O power supply pin (2.95-5.5 V) |+| 41 | PC6/SPI_MOSI | output | Port C6 or SPI master out/slave in with high-sink capability |+| 42 | PC7/SPI_MISO | input | Port C7 or SPI master in/slave out with high-sink capability |+| 43 | PG0/CAN_TX | output | Port G0 or beCAN transmit output (available on STM8S208xx only) |+| 44 | PG1/CAN_RX | input | Port G1 or beCAN receive input (available on STM8S208xx only) |+| 45 | PG2 | bidirectional | Port G2 general-purpose I/O pin |+| 46 | PG3 | bidirectional | Port G3 general-purpose I/O pin |+| 47 | PG4 | bidirectional | Port G4 general-purpose I/O pin |+| 48 | PI0 | bidirectional | Port I0 general-purpose I/O pin |+| 49 | PG5 | bidirectional | Port G5 general-purpose I/O pin |+| 50 | PG6 | bidirectional | Port G6 general-purpose I/O pin |+| 51 | PG7 | bidirectional | Port G7 general-purpose I/O pin |+| 52 | PE4 | bidirectional | Port E4 general-purpose I/O pin |+| 53 | PE3/TIM1_BKIN | input | Port E3 or Timer 1 break input to force timer outputs to defined state |+| 54 | PE2/I2C_SDA | tri_state | Port E2 or I2C data line (true open-drain with no push-pull driver) |+| 55 | PE1/I2C_SCL | tri_state | Port E1 or I2C clock line (true open-drain with no push-pull driver) |+| 56 | PE0/CLK_CCO | output | Port E0 or configurable clock output with high-sink capability |+| 57 | PD0/TIM3_CH2 | bidirectional | Port D0 or Timer 3 channel 2 output, can be remapped to Timer 1 break input or clock output |+| 58 | PD1/SWIM | bidirectional | Port D1 or SWIM single-wire debug interface with pull-up during reset |+| 59 | PD2/TIM3_CH1 | bidirectional | Port D2 or Timer 3 channel 1 output, can be remapped to Timer 2 channel 3 with high-sink capability |+| 60 | PD3/TIM2_CH2 | bidirectional | Port D3 or Timer 2 channel 2 output, can be remapped to ADC external trigger with high-sink capability |+| 61 | PD4/TIM2_CH1/BEEP | bidirectional | Port D4 or Timer 2 channel 1 output or beeper output (1/2/4 kHz) with high-sink capability |+| 62 | PD5/UART3_TX | output | Port D5 or UART3 transmit output |+| 63 | PD6/UART3_RX | input | Port D6 or UART3 receive input with pull-up, controlled by bootloader |+| 64 | PD7/TLI | input | Port D7 or top-level interrupt input, can be remapped to Timer 1 channel 4 output |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-64(10x10) |+| Category | Embedded Processors & Controllers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `STM8S207RBT6`+- Footprint: `Package_QFP:LQFP-64_10x10mm_P0.5mm`+- 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)+- 3D model files: `stm8s207rbt6-etched.step` / `stm8s207rbt6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm8s207rbt6.step` / `stm8s207rbt6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586177283346878464) (103 pp, sha256 `9ab3f7b6dda7af91`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm8s207rbt6-datasheet.pdf)
page.jsonadded+480@@ -0,0 +1,480 @@+{+ "slug": "stm8s207rbt6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-64(10x10). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm8s207rbt6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm8s207rbt6.kicad_sym",+ "stm8s207rbt6.kicad_mod",+ "stm8s207rbt6.glb",+ "stm8s207rbt6.step",+ "stm8s207rbt6.lbr",+ "docs/hero.png",+ "docs/stm8s207rbt6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM8S207RBT6",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-64(10x10)",+ "pin_count": 64,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586177283346878464",+ "parts": {+ "symbol": "stm8s207rbt6.kicad_sym",+ "footprint": "stm8s207rbt6.kicad_mod",+ "model_3d": "stm8s207rbt6-etched.glb",+ "model_3d_plain": "stm8s207rbt6.glb",+ "model_3d_step": "stm8s207rbt6-etched.step",+ "model_3d_step_plain": "stm8s207rbt6.step",+ "lbr": "stm8s207rbt6.lbr"+ },+ "distributor_links": {+ "lcsc": "C8346"+ },+ "pins": [+ {+ "number": "1",+ "name": "NRST",+ "type": "input",+ "description": "Reset pin with internal pull-up resistor that triggers device reset when pulled low"+ },+ {+ "number": "2",+ "name": "PA1/OSCIN",+ "type": "input",+ "description": "Port A1 or crystal oscillator input supporting 1-24 MHz external clock"+ },+ {+ "number": "3",+ "name": "PA2/OSCOUT",+ "type": "output",+ "description": "Port A2 or crystal oscillator feedback output for oscillator circuit"+ },+ {+ "number": "4",+ "name": "VSSIO_1",+ "type": "power_in",+ "description": "I/O power supply ground pin"+ },+ {+ "number": "5",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground pin"+ },+ {+ "number": "6",+ "name": "VCAP",+ "type": "passive",+ "description": "1.8V regulator capacitor pin requiring 470-3300 nF external capacitor with ESR ≤ 0.3 Ω"+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply pin (2.95-5.5 V)"+ },+ {+ "number": "8",+ "name": "VDDIO_1",+ "type": "power_in",+ "description": "I/O power supply pin (2.95-5.5 V)"+ },+ {+ "number": "9",+ "name": "PA3/TIM2_CH3",+ "type": "bidirectional",+ "description": "Port A3 GPIO or Timer 2 channel 3 output, can be remapped to TIM3_CH1"+ },+ {+ "number": "10",+ "name": "PA4/UART1_RX",+ "type": "input",+ "description": "Port A4 or UART1 receive input with pull-up, controlled by bootloader"+ },+ {+ "number": "11",+ "name": "PA5/UART1_TX",+ "type": "output",+ "description": "Port A4 or UART1 transmit output"+ },+ {+ "number": "12",+ "name": "PA6/UART1_CK",+ "type": "output",+ "description": "Port A6 or UART1 synchronous clock output"+ },+ {+ "number": "13",+ "name": "PF7/AIN15",+ "type": "input",+ "description": "Port F7 or analog input 15 (0 to VDDA voltage range)"+ },+ {+ "number": "14",+ "name": "PF6/AIN14",+ "type": "input",+ "description": "Port F6 or analog input 14 (0 to VDDA voltage range)"+ },+ {+ "number": "15",+ "name": "PF5/AIN13",+ "type": "input",+ "description": "Port F5 or analog input 13 (0 to VDDA voltage range)"+ },+ {+ "number": "16",+ "name": "PF4/AIN12",+ "type": "input",+ "description": "Port F4 or analog input 12 (0 to VDDA voltage range)"+ },+ {+ "number": "17",+ "name": "PF3/AIN11",+ "type": "input",+ "description": "Port F3 or analog input 11 (0 to VDDA voltage range)"+ },+ {+ "number": "18",+ "name": "VREF+",+ "type": "power_in",+ "description": "ADC positive reference voltage (2.75-VDDA V)"+ },+ {+ "number": "19",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply pin (3-5.5 V)"+ },+ {+ "number": "20",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground pin"+ },+ {+ "number": "21",+ "name": "VREF-",+ "type": "power_in",+ "description": "ADC negative reference voltage (VSSA-0.5 V)"+ },+ {+ "number": "22",+ "name": "PF0/AIN10",+ "type": "input",+ "description": "Port F0 or analog input 10 (0 to VDDA voltage range)"+ },+ {+ "number": "23",+ "name": "PB7/AIN7",+ "type": "input",+ "description": "Port B7 or analog input 7 (0 to VDDA voltage range)"+ },+ {+ "number": "24",+ "name": "PB6/AIN6",+ "type": "input",+ "description": "Port B6 or analog input 6 (0 to VDDA voltage range)"+ },+ {+ "number": "25",+ "name": "PB5/AIN5",+ "type": "input",+ "description": "Port B5 or analog input 5 or I2C data line (SDA) when remapped"+ },+ {+ "number": "26",+ "name": "PB4/AIN4",+ "type": "input",+ "description": "Port B4 or analog input 4 or I2C clock line (SCL) when remapped"+ },+ {+ "number": "27",+ "name": "PB3/AIN3",+ "type": "input",+ "description": "Port B3 or analog input 3 or Timer 1 external trigger input when remapped"+ },+ {+ "number": "28",+ "name": "PB2/AIN2",+ "type": "input",+ "description": "Port B2 or analog input 2 or Timer 1 channel 3 complement output when remapped"+ },+ {+ "number": "29",+ "name": "PB1/AIN1",+ "type": "input",+ "description": "Port B1 or analog input 1 or Timer 1 channel 2 complement output when remapped"+ },+ {+ "number": "30",+ "name": "PB0/AIN0",+ "type": "input",+ "description": "Port B0 or analog input 0 or Timer 1 channel 1 complement output when remapped"+ },+ {+ "number": "31",+ "name": "PE7/AIN8",+ "type": "input",+ "description": "Port E7 or analog input 8 (0 to VDDA voltage range)"+ },+ {+ "number": "32",+ "name": "PE6/AIN9",+ "type": "input",+ "description": "Port E6 or analog input 9 (0 to VDDA voltage range)"+ },+ {+ "number": "33",+ "name": "PE5/SPI_NSS",+ "type": "bidirectional",+ "description": "Port E5 or SPI master/slave select signal"+ },+ {+ "number": "34",+ "name": "PC1/TIM1_CH1",+ "type": "output",+ "description": "Port C1 or Timer 1 channel 1 output with high-sink capability"+ },+ {+ "number": "35",+ "name": "PC2/TIM1_CH2",+ "type": "output",+ "description": "Port C2 or Timer 1 channel 2 output with high-sink capability"+ },+ {+ "number": "36",+ "name": "PC3/TIM1_CH3",+ "type": "output",+ "description": "Port C3 or Timer 1 channel 3 output with high-sink capability"+ },+ {+ "number": "37",+ "name": "PC4/TIM1_CH4",+ "type": "output",+ "description": "Port C4 or Timer 1 channel 4 output with high-sink capability"+ },+ {+ "number": "38",+ "name": "PC5/SPI_SCK",+ "type": "output",+ "description": "Port C5 or SPI serial clock output with high-sink capability"+ },+ {+ "number": "39",+ "name": "VSSIO_2",+ "type": "power_in",+ "description": "I/O power supply ground pin"+ },+ {+ "number": "40",+ "name": "VDDIO_2",+ "type": "power_in",+ "description": "I/O power supply pin (2.95-5.5 V)"+ },+ {+ "number": "41",+ "name": "PC6/SPI_MOSI",+ "type": "output",+ "description": "Port C6 or SPI master out/slave in with high-sink capability"+ },+ {+ "number": "42",+ "name": "PC7/SPI_MISO",+ "type": "input",+ "description": "Port C7 or SPI master in/slave out with high-sink capability"+ },+ {+ "number": "43",+ "name": "PG0/CAN_TX",+ "type": "output",+ "description": "Port G0 or beCAN transmit output (available on STM8S208xx only)"+ },+ {+ "number": "44",+ "name": "PG1/CAN_RX",+ "type": "input",+ "description": "Port G1 or beCAN receive input (available on STM8S208xx only)"+ },+ {+ "number": "45",+ "name": "PG2",+ "type": "bidirectional",+ "description": "Port G2 general-purpose I/O pin"+ },+ {+ "number": "46",+ "name": "PG3",+ "type": "bidirectional",+ "description": "Port G3 general-purpose I/O pin"+ },+ {+ "number": "47",+ "name": "PG4",+ "type": "bidirectional",+ "description": "Port G4 general-purpose I/O pin"+ },+ {+ "number": "48",+ "name": "PI0",+ "type": "bidirectional",+ "description": "Port I0 general-purpose I/O pin"+ },+ {+ "number": "49",+ "name": "PG5",+ "type": "bidirectional",+ "description": "Port G5 general-purpose I/O pin"+ },+ {+ "number": "50",+ "name": "PG6",+ "type": "bidirectional",+ "description": "Port G6 general-purpose I/O pin"+ },+ {+ "number": "51",+ "name": "PG7",+ "type": "bidirectional",+ "description": "Port G7 general-purpose I/O pin"+ },+ {+ "number": "52",+ "name": "PE4",+ "type": "bidirectional",+ "description": "Port E4 general-purpose I/O pin"+ },+ {+ "number": "53",+ "name": "PE3/TIM1_BKIN",+ "type": "input",+ "description": "Port E3 or Timer 1 break input to force timer outputs to defined state"+ },+ {+ "number": "54",+ "name": "PE2/I2C_SDA",+ "type": "tri_state",+ "description": "Port E2 or I2C data line (true open-drain with no push-pull driver)"+ },+ {+ "number": "55",+ "name": "PE1/I2C_SCL",+ "type": "tri_state",+ "description": "Port E1 or I2C clock line (true open-drain with no push-pull driver)"+ },+ {+ "number": "56",+ "name": "PE0/CLK_CCO",+ "type": "output",+ "description": "Port E0 or configurable clock output with high-sink capability"+ },+ {+ "number": "57",+ "name": "PD0/TIM3_CH2",+ "type": "bidirectional",+ "description": "Port D0 or Timer 3 channel 2 output, can be remapped to Timer 1 break input or clock output"+ },+ {+ "number": "58",+ "name": "PD1/SWIM",+ "type": "bidirectional",+ "description": "Port D1 or SWIM single-wire debug interface with pull-up during reset"+ },+ {+ "number": "59",+ "name": "PD2/TIM3_CH1",+ "type": "bidirectional",+ "description": "Port D2 or Timer 3 channel 1 output, can be remapped to Timer 2 channel 3 with high-sink capability"+ },+ {+ "number": "60",+ "name": "PD3/TIM2_CH2",+ "type": "bidirectional",+ "description": "Port D3 or Timer 2 channel 2 output, can be remapped to ADC external trigger with high-sink capability"+ },+ {+ "number": "61",+ "name": "PD4/TIM2_CH1/BEEP",+ "type": "bidirectional",+ "description": "Port D4 or Timer 2 channel 1 output or beeper output (1/2/4 kHz) with high-sink capability"+ },+ {+ "number": "62",+ "name": "PD5/UART3_TX",+ "type": "output",+ "description": "Port D5 or UART3 transmit output"+ },+ {+ "number": "63",+ "name": "PD6/UART3_RX",+ "type": "input",+ "description": "Port D6 or UART3 receive input with pull-up, controlled by bootloader"+ },+ {+ "number": "64",+ "name": "PD7/TLI",+ "type": "input",+ "description": "Port D7 or top-level interrupt input, can be remapped to Timer 1 channel 4 output"+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: CAN interface (CAN_TX/CAN_RX on pins 43-44) is only available on STM8S208xx devices; STM8S207RBT6 do; UART1_RX (pin 10) and UART3_RX (pin 63) default states are controlled by ROM bootloader during reset; Alternate function remapping requires specific option bits (AFR0-AFR7) in option bytes at address 0x",+ "19/64 pins cited to the wrong page (name found elsewhere): ['45:PG2@p28', '46:PG3@p28', '47:PG4@p28', '48:PI0@p28']"+ ],+ "pages_sent": 103,+ "cost_usd": 1.1194,+ "at": "2026-09-23T12:40:26"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586177283346878464",+ "pages": 103,+ "sha256": "9ab3f7b6dda7af91",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 64,+ "described": 64,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}