component
STM8S207CBT6TR
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+84@@ -0,0 +1,84 @@+# STM8S207CBT6TR++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM8S207CBT6TR from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | NRST | bidirectional | Reset input; pull-up to VDD with external filter recommended per Figure 36 |+| 2 | PA1/OSCIN | bidirectional | Port A1; external crystal oscillator input or GPIO |+| 3 | PA2/OSCOUT | bidirectional | Port A2; external crystal oscillator output or GPIO |+| 4 | VSSIO_1 | power_in | I/O ground supply |+| 5 | VSS | power_in | Digital ground supply |+| 6 | VCAP | power_in | 1.8 V internal regulator decoupling capacitor connection; 470-3300 nF ESR <0.3 Ω required |+| 7 | VDD | power_in | Digital power supply 2.95-5.5 V |+| 8 | VDDIO_1 | power_in | I/O power supply 2.95-5.5 V |+| 9 | PA3/TIM2_CH3 | bidirectional | Port A3; GPIO or Timer 2 channel 3 output; remappable to TIM3_CH1 via AFR1 |+| 10 | PA4/UART1_RX | bidirectional | Port A4; high-sink GPIO with 10-bit ADC or UART1 receive input |+| 11 | PA5/UART1_TX | bidirectional | Port A5; high-sink GPIO with 10-bit ADC or UART1 transmit output |+| 12 | PA6/UART1_CK | bidirectional | Port A6; high-sink GPIO or UART1 synchronous clock |+| 13 | VDDA | power_in | Analog power supply 2.95-5.5 V for ADC |+| 14 | VSSA | power_in | Analog ground supply |+| 15 | PB7/AIN7 | bidirectional | Port B7; GPIO with weak pull-up or 10-bit ADC analog input channel 7 |+| 16 | PB6/AIN6 | bidirectional | Port B6; GPIO with weak pull-up or 10-bit ADC analog input channel 6 |+| 17 | PB5/AIN5 | bidirectional | Port B5; GPIO with weak pull-up or 10-bit ADC analog input channel 5; remappable to I2C_SDA via AFR6 |+| 18 | PB4/AIN4 | bidirectional | Port B4; GPIO with weak pull-up or 10-bit ADC analog input channel 4; remappable to I2C_SCL via AFR6 |+| 19 | PB3/AIN3 | bidirectional | Port B3; GPIO with weak pull-up or 10-bit ADC analog input channel 3; remappable to TIM1_ETR via AFR5 |+| 20 | PB2/AIN2 | bidirectional | Port B2; GPIO with weak pull-up or 10-bit ADC analog input channel 2; remappable to TIM1_CH3N via AFR5 |+| 21 | PB1/AIN1 | bidirectional | Port B1; GPIO with weak pull-up or 10-bit ADC analog input channel 1; remappable to TIM1_CH2N via AFR5 |+| 22 | PB0/AIN0 | bidirectional | Port B0; GPIO with weak pull-up or 10-bit ADC analog input channel 0; remappable to TIM1_CH1N via AFR5 |+| 23 | PE7/AIN8 | bidirectional | Port E7; GPIO with weak pull-up or 10-bit ADC analog input channel 8 |+| 24 | PE6/AIN9 | bidirectional | Port E6; GPIO with weak pull-up or 10-bit ADC analog input channel 9 |+| 25 | PE5/SPI_NSS | bidirectional | Port E5; GPIO with weak pull-up or SPI slave select input |+| 26 | PC1/TIM1_CH1 | bidirectional | Port C1; high-sink GPIO with weak pull-up or Timer 1 channel 1 output |+| 27 | PC2/TIM1_CH2 | bidirectional | Port C2; high-sink GPIO with weak pull-up or Timer 1 channel 2 output |+| 28 | PC3/TIM1_CH3 | bidirectional | Port C3; high-sink GPIO with weak pull-up or Timer 1 channel 3 output |+| 29 | PC4/TIM1_CH4 | bidirectional | Port C4; high-sink GPIO with weak pull-up or Timer 1 channel 4 output |+| 30 | PC5/SPI_SCK | bidirectional | Port C5; high-sink GPIO with weak pull-up or SPI clock output |+| 31 | VSSIO_2 | power_in | I/O ground supply |+| 32 | VDDIO_2 | power_in | I/O power supply 2.95-5.5 V |+| 33 | PC6/SPI_MOSI | bidirectional | Port C6; high-sink GPIO with weak pull-up or SPI master-out/slave-in data line |+| 34 | PC7/SPI_MISO | bidirectional | Port C7; high-sink GPIO with weak pull-up or SPI master-in/slave-out data line |+| 35 | PG0/CAN_TX | bidirectional | Port G0; GPIO or beCAN transmit output (STM8S208xx only) |+| 36 | PG1/CAN_RX | bidirectional | Port G1; GPIO or beCAN receive input (STM8S208xx only) |+| 37 | PE3/TIM1_BKIN | bidirectional | Port E3; GPIO with weak pull-up or Timer 1 break input |+| 38 | PE2/I2C_SDA | tri_state | Port E2; true open-drain I2C data line with no internal pull-up; external 4.7 kΩ pull-up required |+| 39 | PE1/I2C_SCL | tri_state | Port E1; true open-drain I2C clock line with no internal pull-up; external 4.7 kΩ pull-up required |+| 40 | PE0/CLK_CCO | bidirectional | Port E0; high-sink GPIO with weak pull-up or configurable clock output |+| 41 | PD0/TIM3_CH2 | bidirectional | Port D0; high-sink GPIO with weak pull-up or Timer 3 channel 2 output; remappable to TIM1_BKIN or CLK_CCO via AFR3/AFR2 |+| 42 | PD1/SWIM | bidirectional | Port D1; high-sink GPIO with pull-up during reset phase or SWIM single-wire debug interface |+| 43 | PD2/TIM3_CH1 | bidirectional | Port D2; high-sink GPIO with weak pull-up or Timer 3 channel 1 output; remappable to TIM2_CH3 via AFR1 |+| 44 | PD3/TIM2_CH2 | bidirectional | Port D3; high-sink GPIO with weak pull-up or Timer 2 channel 2 output; remappable to ADC_ETR via AFR0 |+| 45 | PD4/TIM2_CH1 | bidirectional | Port D4; high-sink GPIO with weak pull-up or Timer 2 channel 1 output; remappable to BEEP output via AFR7 |+| 46 | PD5/UART3_TX | bidirectional | Port D5; GPIO or UART3 transmit output for data transmission |+| 47 | PD6/UART3_RX | bidirectional | Port D6; GPIO with weak pull-up or UART3 receive input; pull-up controlled by bootloader during reset |+| 48 | PD7/TLI | bidirectional | Port D7; GPIO with weak pull-up or top-level interrupt input; remappable to TIM1_CH4 via AFR4 (44-pin package only) |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM8S207CBT6TR`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm8s207cbt6tr-etched.step` / `stm8s207cbt6tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm8s207cbt6tr.step` / `stm8s207cbt6tr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603031047126720512) (117 pp, sha256 `076cd3ee275e9dc3`, retrieved 2026-09-27, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm8s207cbt6tr-datasheet.pdf)
page.jsonadded+398@@ -0,0 +1,398 @@+{+ "slug": "stm8s207cbt6tr",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm8s207cbt6tr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm8s207cbt6tr.kicad_sym",+ "stm8s207cbt6tr.kicad_mod",+ "stm8s207cbt6tr.glb",+ "stm8s207cbt6tr.step",+ "stm8s207cbt6tr.lbr",+ "docs/hero.png",+ "docs/stm8s207cbt6tr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM8S207CBT6TR",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603031047126720512",+ "parts": {+ "symbol": "stm8s207cbt6tr.kicad_sym",+ "footprint": "stm8s207cbt6tr.kicad_mod",+ "model_3d": "stm8s207cbt6tr-etched.glb",+ "model_3d_plain": "stm8s207cbt6tr.glb",+ "model_3d_step": "stm8s207cbt6tr-etched.step",+ "model_3d_step_plain": "stm8s207cbt6tr.step",+ "lbr": "stm8s207cbt6tr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2970031",+ "digikey": "497-18861-2-ND",+ "mouser": "511-STM8S207CBT6TR"+ },+ "distributor_check": {+ "checked_at": "2026-09-27T07:14:29Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-18861-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-STM8S207CBT6TR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "NRST",+ "type": "bidirectional",+ "description": "Reset input; pull-up to VDD with external filter recommended per Figure 36"+ },+ {+ "number": "2",+ "name": "PA1/OSCIN",+ "type": "bidirectional",+ "description": "Port A1; external crystal oscillator input or GPIO"+ },+ {+ "number": "3",+ "name": "PA2/OSCOUT",+ "type": "bidirectional",+ "description": "Port A2; external crystal oscillator output or GPIO"+ },+ {+ "number": "4",+ "name": "VSSIO_1",+ "type": "power_in",+ "description": "I/O ground supply"+ },+ {+ "number": "5",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground supply"+ },+ {+ "number": "6",+ "name": "VCAP",+ "type": "power_in",+ "description": "1.8 V internal regulator decoupling capacitor connection; 470-3300 nF ESR <0.3 Ω required"+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply 2.95-5.5 V"+ },+ {+ "number": "8",+ "name": "VDDIO_1",+ "type": "power_in",+ "description": "I/O power supply 2.95-5.5 V"+ },+ {+ "number": "9",+ "name": "PA3/TIM2_CH3",+ "type": "bidirectional",+ "description": "Port A3; GPIO or Timer 2 channel 3 output; remappable to TIM3_CH1 via AFR1"+ },+ {+ "number": "10",+ "name": "PA4/UART1_RX",+ "type": "bidirectional",+ "description": "Port A4; high-sink GPIO with 10-bit ADC or UART1 receive input"+ },+ {+ "number": "11",+ "name": "PA5/UART1_TX",+ "type": "bidirectional",+ "description": "Port A5; high-sink GPIO with 10-bit ADC or UART1 transmit output"+ },+ {+ "number": "12",+ "name": "PA6/UART1_CK",+ "type": "bidirectional",+ "description": "Port A6; high-sink GPIO or UART1 synchronous clock"+ },+ {+ "number": "13",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog power supply 2.95-5.5 V for ADC"+ },+ {+ "number": "14",+ "name": "VSSA",+ "type": "power_in",+ "description": "Analog ground supply"+ },+ {+ "number": "15",+ "name": "PB7/AIN7",+ "type": "bidirectional",+ "description": "Port B7; GPIO with weak pull-up or 10-bit ADC analog input channel 7"+ },+ {+ "number": "16",+ "name": "PB6/AIN6",+ "type": "bidirectional",+ "description": "Port B6; GPIO with weak pull-up or 10-bit ADC analog input channel 6"+ },+ {+ "number": "17",+ "name": "PB5/AIN5",+ "type": "bidirectional",+ "description": "Port B5; GPIO with weak pull-up or 10-bit ADC analog input channel 5; remappable to I2C_SDA via AFR6"+ },+ {+ "number": "18",+ "name": "PB4/AIN4",+ "type": "bidirectional",+ "description": "Port B4; GPIO with weak pull-up or 10-bit ADC analog input channel 4; remappable to I2C_SCL via AFR6"+ },+ {+ "number": "19",+ "name": "PB3/AIN3",+ "type": "bidirectional",+ "description": "Port B3; GPIO with weak pull-up or 10-bit ADC analog input channel 3; remappable to TIM1_ETR via AFR5"+ },+ {+ "number": "20",+ "name": "PB2/AIN2",+ "type": "bidirectional",+ "description": "Port B2; GPIO with weak pull-up or 10-bit ADC analog input channel 2; remappable to TIM1_CH3N via AFR5"+ },+ {+ "number": "21",+ "name": "PB1/AIN1",+ "type": "bidirectional",+ "description": "Port B1; GPIO with weak pull-up or 10-bit ADC analog input channel 1; remappable to TIM1_CH2N via AFR5"+ },+ {+ "number": "22",+ "name": "PB0/AIN0",+ "type": "bidirectional",+ "description": "Port B0; GPIO with weak pull-up or 10-bit ADC analog input channel 0; remappable to TIM1_CH1N via AFR5"+ },+ {+ "number": "23",+ "name": "PE7/AIN8",+ "type": "bidirectional",+ "description": "Port E7; GPIO with weak pull-up or 10-bit ADC analog input channel 8"+ },+ {+ "number": "24",+ "name": "PE6/AIN9",+ "type": "bidirectional",+ "description": "Port E6; GPIO with weak pull-up or 10-bit ADC analog input channel 9"+ },+ {+ "number": "25",+ "name": "PE5/SPI_NSS",+ "type": "bidirectional",+ "description": "Port E5; GPIO with weak pull-up or SPI slave select input"+ },+ {+ "number": "26",+ "name": "PC1/TIM1_CH1",+ "type": "bidirectional",+ "description": "Port C1; high-sink GPIO with weak pull-up or Timer 1 channel 1 output"+ },+ {+ "number": "27",+ "name": "PC2/TIM1_CH2",+ "type": "bidirectional",+ "description": "Port C2; high-sink GPIO with weak pull-up or Timer 1 channel 2 output"+ },+ {+ "number": "28",+ "name": "PC3/TIM1_CH3",+ "type": "bidirectional",+ "description": "Port C3; high-sink GPIO with weak pull-up or Timer 1 channel 3 output"+ },+ {+ "number": "29",+ "name": "PC4/TIM1_CH4",+ "type": "bidirectional",+ "description": "Port C4; high-sink GPIO with weak pull-up or Timer 1 channel 4 output"+ },+ {+ "number": "30",+ "name": "PC5/SPI_SCK",+ "type": "bidirectional",+ "description": "Port C5; high-sink GPIO with weak pull-up or SPI clock output"+ },+ {+ "number": "31",+ "name": "VSSIO_2",+ "type": "power_in",+ "description": "I/O ground supply"+ },+ {+ "number": "32",+ "name": "VDDIO_2",+ "type": "power_in",+ "description": "I/O power supply 2.95-5.5 V"+ },+ {+ "number": "33",+ "name": "PC6/SPI_MOSI",+ "type": "bidirectional",+ "description": "Port C6; high-sink GPIO with weak pull-up or SPI master-out/slave-in data line"+ },+ {+ "number": "34",+ "name": "PC7/SPI_MISO",+ "type": "bidirectional",+ "description": "Port C7; high-sink GPIO with weak pull-up or SPI master-in/slave-out data line"+ },+ {+ "number": "35",+ "name": "PG0/CAN_TX",+ "type": "bidirectional",+ "description": "Port G0; GPIO or beCAN transmit output (STM8S208xx only)"+ },+ {+ "number": "36",+ "name": "PG1/CAN_RX",+ "type": "bidirectional",+ "description": "Port G1; GPIO or beCAN receive input (STM8S208xx only)"+ },+ {+ "number": "37",+ "name": "PE3/TIM1_BKIN",+ "type": "bidirectional",+ "description": "Port E3; GPIO with weak pull-up or Timer 1 break input"+ },+ {+ "number": "38",+ "name": "PE2/I2C_SDA",+ "type": "tri_state",+ "description": "Port E2; true open-drain I2C data line with no internal pull-up; external 4.7 kΩ pull-up required"+ },+ {+ "number": "39",+ "name": "PE1/I2C_SCL",+ "type": "tri_state",+ "description": "Port E1; true open-drain I2C clock line with no internal pull-up; external 4.7 kΩ pull-up required"+ },+ {+ "number": "40",+ "name": "PE0/CLK_CCO",+ "type": "bidirectional",+ "description": "Port E0; high-sink GPIO with weak pull-up or configurable clock output"+ },+ {+ "number": "41",+ "name": "PD0/TIM3_CH2",+ "type": "bidirectional",+ "description": "Port D0; high-sink GPIO with weak pull-up or Timer 3 channel 2 output; remappable to TIM1_BKIN or CLK_CCO via AFR3/AFR2"+ },+ {+ "number": "42",+ "name": "PD1/SWIM",+ "type": "bidirectional",+ "description": "Port D1; high-sink GPIO with pull-up during reset phase or SWIM single-wire debug interface"+ },+ {+ "number": "43",+ "name": "PD2/TIM3_CH1",+ "type": "bidirectional",+ "description": "Port D2; high-sink GPIO with weak pull-up or Timer 3 channel 1 output; remappable to TIM2_CH3 via AFR1"+ },+ {+ "number": "44",+ "name": "PD3/TIM2_CH2",+ "type": "bidirectional",+ "description": "Port D3; high-sink GPIO with weak pull-up or Timer 2 channel 2 output; remappable to ADC_ETR via AFR0"+ },+ {+ "number": "45",+ "name": "PD4/TIM2_CH1",+ "type": "bidirectional",+ "description": "Port D4; high-sink GPIO with weak pull-up or Timer 2 channel 1 output; remappable to BEEP output via AFR7"+ },+ {+ "number": "46",+ "name": "PD5/UART3_TX",+ "type": "bidirectional",+ "description": "Port D5; GPIO or UART3 transmit output for data transmission"+ },+ {+ "number": "47",+ "name": "PD6/UART3_RX",+ "type": "bidirectional",+ "description": "Port D6; GPIO with weak pull-up or UART3 receive input; pull-up controlled by bootloader during reset"+ },+ {+ "number": "48",+ "name": "PD7/TLI",+ "type": "bidirectional",+ "description": "Port D7; GPIO with weak pull-up or top-level interrupt input; remappable to TIM1_CH4 via AFR4 (44-pin package only)"+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Port D7/TLI (pin 48) AFR4 remapping is documented as 'available in 44-pin package only' but appears ; CAN_TX/CAN_RX (pins 35-36) documented as available on STM8S208xx devices only; STM8S207CBT6TR is S20; VREF+ and VREF- ADC reference pins are documented for 80/64-pin packages but not present in LQFP48 p"+ ],+ "pages_sent": 117,+ "cost_usd": 1.5244,+ "at": "2026-09-27T07:14:04"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603031047126720512",+ "pages": 117,+ "sha256": "076cd3ee275e9dc3",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}