component
STM8S103F2M6
Public Made by Adomby adom
STMicroelectronics Microcontroller Units (MCUs/MPUs/SOCs), SOP-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+56@@ -0,0 +1,56 @@+# STM8S103F2M6++**STMicroelectronics** · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-20-300mil++STM8S103F2M6 from STMicroelectronics, in a SOP-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PD4/BEEP/TIM2_CH1/UART1_CK | bidirectional | Port D4 configurable as Timer 2 channel 1, BEEP output, or UART1 clock with high sink output capability. |+| 2 | PD5/AIN5/UART1_TX | bidirectional | Port D5 configurable as analog input 5 or UART1 transmit data with high sink output capability. |+| 3 | PD6/AIN6/UART1_RX | bidirectional | Port D6 configurable as analog input 6 or UART1 receive data with high sink output capability. |+| 4 | NRST | input | Active-low reset input with 30 to 80 kΩ internal pull-up resistor and approximately 75 ns input filter. |+| 5 | PA1/OSCIN | bidirectional | Port A1 configurable as crystal/oscillator input or standard GPIO with weak pull-up; O1 output speed. |+| 6 | PA2/OSCOUT | bidirectional | Port A2 configurable as crystal/oscillator output or standard GPIO; O1 output speed. |+| 7 | VSS | power_in | Digital ground; all ground pins must be connected to complete power distribution. |+| 8 | VCAP | passive | Internal voltage regulator bypass capacitor connection; requires 470 nF to 3.3 µF capacitor to ground with ESR 0.3 Ω and ESL 15 nH maximum. |+| 9 | VDD | power_in | Digital power supply; 2.95 to 5.5 V operating voltage range; all supply pins must be connected to external power. |+| 10 | PA3/TIM2_CH3/SPI_NSS | bidirectional | Port A3 configurable as Timer 2 channel 3, SPI master/slave select, or GPIO with high sink output capability and O3 speed. |+| 11 | PB5/I2C_SDA/TIM1_BKIN | bidirectional | Port B5 configurable as I2C data (true open-drain), Timer 1 break input, or GPIO; O1 output speed. |+| 12 | PB4/I2C_SCL | bidirectional | Port B4 configurable as I2C clock (true open-drain), ADC external trigger, or GPIO; O1 output speed. |+| 13 | PC3/TIM1_CH3/TLI | bidirectional | Port C3 configurable as Timer 1 channel 3, top-level interrupt, or GPIO with high sink output capability and O3 speed. |+| 14 | PC4/CLK_CCO/TIM1_CH4/AIN2 | bidirectional | Port C4 configurable as configurable clock output, Timer 1 channel 4, analog input 2, or GPIO with high sink output capability and O3 speed. |+| 15 | PC5/SPI_SCK | bidirectional | Port C5 configurable as SPI clock, Timer 2 channel 1, or GPIO with high sink output capability and O3 speed. |+| 16 | PC6/SPI_MOSI | bidirectional | Port C6 configurable as SPI master out/slave in, Timer 1 channel 1, or GPIO with high sink output capability and O3 speed. |+| 17 | PC7/SPI_MISO | bidirectional | Port C7 configurable as SPI master in/slave out, Timer 1 channel 2, or GPIO with high sink output capability and O3 speed. |+| 18 | PD1/SWIM | bidirectional | Port D1 configurable as SWIM data interface or GPIO with high sink output capability, O4 speed, and internal pull-up during reset phase. |+| 19 | PD2/AIN3 | bidirectional | Port D2 configurable as analog input 3, Timer 2 channel 3, or GPIO with high sink output capability and O3 speed. |+| 20 | PD3/AIN4/TIM2_CH2/ADC_ETR | bidirectional | Port D3 configurable as analog input 4, Timer 2 channel 2, ADC external trigger, or GPIO with high sink output capability and O3 speed. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOP-20-300mil |+| Category | Single Chip Microcomputer/Microcontroller |+| Pins | 20 |++## CAD (KiCad official)++- Symbol: `STM8S103F2M6`+- Footprint: `Package_SO:SOP-20_7.5x12.8mm_P1.27mm`+- 3D model: SOP-20-300mil, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 2.65 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `stm8s103f2m6-etched.step` / `stm8s103f2m6-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm8s103f2m6.step` / `stm8s103f2m6.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922750673301504) (121 pp, sha256 `ac23789ac0a2f408`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm8s103f2m6-datasheet.pdf)
page.jsonadded+230@@ -0,0 +1,230 @@+{+ "slug": "stm8s103f2m6",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontroller Units (MCUs/MPUs/SOCs), SOP-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "single chip microcomputer-microcontroller",+ "stm8s103f2m6",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm8s103f2m6.kicad_sym",+ "stm8s103f2m6.kicad_mod",+ "stm8s103f2m6.glb",+ "stm8s103f2m6.step",+ "stm8s103f2m6.lbr",+ "docs/hero.png",+ "docs/stm8s103f2m6-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "STM8S103F2M6",+ "manufacturer": "STMicroelectronics",+ "package": "SOP-20-300mil",+ "pin_count": 20,+ "category": "Single Chip Microcomputer/Microcontroller",+ "subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922750673301504",+ "parts": {+ "symbol": "stm8s103f2m6.kicad_sym",+ "footprint": "stm8s103f2m6.kicad_mod",+ "model_3d": "stm8s103f2m6-etched.glb",+ "model_3d_plain": "stm8s103f2m6.glb",+ "model_3d_step": "stm8s103f2m6-etched.step",+ "model_3d_step_plain": "stm8s103f2m6.step",+ "lbr": "stm8s103f2m6.lbr"+ },+ "distributor_links": {+ "lcsc": "C1338322",+ "digikey": "497-16856-ND",+ "mouser": "511-STM8S103F2M6"+ },+ "distributor_check": {+ "checked_at": "2026-10-01T17:35:04Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-16856-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-STM8S103F2M6",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PD4/BEEP/TIM2_CH1/UART1_CK",+ "type": "bidirectional",+ "description": "Port D4 configurable as Timer 2 channel 1, BEEP output, or UART1 clock with high sink output capability."+ },+ {+ "number": "2",+ "name": "PD5/AIN5/UART1_TX",+ "type": "bidirectional",+ "description": "Port D5 configurable as analog input 5 or UART1 transmit data with high sink output capability."+ },+ {+ "number": "3",+ "name": "PD6/AIN6/UART1_RX",+ "type": "bidirectional",+ "description": "Port D6 configurable as analog input 6 or UART1 receive data with high sink output capability."+ },+ {+ "number": "4",+ "name": "NRST",+ "type": "input",+ "description": "Active-low reset input with 30 to 80 kΩ internal pull-up resistor and approximately 75 ns input filter."+ },+ {+ "number": "5",+ "name": "PA1/OSCIN",+ "type": "bidirectional",+ "description": "Port A1 configurable as crystal/oscillator input or standard GPIO with weak pull-up; O1 output speed."+ },+ {+ "number": "6",+ "name": "PA2/OSCOUT",+ "type": "bidirectional",+ "description": "Port A2 configurable as crystal/oscillator output or standard GPIO; O1 output speed."+ },+ {+ "number": "7",+ "name": "VSS",+ "type": "power_in",+ "description": "Digital ground; all ground pins must be connected to complete power distribution."+ },+ {+ "number": "8",+ "name": "VCAP",+ "type": "passive",+ "description": "Internal voltage regulator bypass capacitor connection; requires 470 nF to 3.3 µF capacitor to ground with ESR 0.3 Ω and ESL 15 nH maximum."+ },+ {+ "number": "9",+ "name": "VDD",+ "type": "power_in",+ "description": "Digital power supply; 2.95 to 5.5 V operating voltage range; all supply pins must be connected to external power."+ },+ {+ "number": "10",+ "name": "PA3/TIM2_CH3/SPI_NSS",+ "type": "bidirectional",+ "description": "Port A3 configurable as Timer 2 channel 3, SPI master/slave select, or GPIO with high sink output capability and O3 speed."+ },+ {+ "number": "11",+ "name": "PB5/I2C_SDA/TIM1_BKIN",+ "type": "bidirectional",+ "description": "Port B5 configurable as I2C data (true open-drain), Timer 1 break input, or GPIO; O1 output speed."+ },+ {+ "number": "12",+ "name": "PB4/I2C_SCL",+ "type": "bidirectional",+ "description": "Port B4 configurable as I2C clock (true open-drain), ADC external trigger, or GPIO; O1 output speed."+ },+ {+ "number": "13",+ "name": "PC3/TIM1_CH3/TLI",+ "type": "bidirectional",+ "description": "Port C3 configurable as Timer 1 channel 3, top-level interrupt, or GPIO with high sink output capability and O3 speed."+ },+ {+ "number": "14",+ "name": "PC4/CLK_CCO/TIM1_CH4/AIN2",+ "type": "bidirectional",+ "description": "Port C4 configurable as configurable clock output, Timer 1 channel 4, analog input 2, or GPIO with high sink output capability and O3 speed."+ },+ {+ "number": "15",+ "name": "PC5/SPI_SCK",+ "type": "bidirectional",+ "description": "Port C5 configurable as SPI clock, Timer 2 channel 1, or GPIO with high sink output capability and O3 speed."+ },+ {+ "number": "16",+ "name": "PC6/SPI_MOSI",+ "type": "bidirectional",+ "description": "Port C6 configurable as SPI master out/slave in, Timer 1 channel 1, or GPIO with high sink output capability and O3 speed."+ },+ {+ "number": "17",+ "name": "PC7/SPI_MISO",+ "type": "bidirectional",+ "description": "Port C7 configurable as SPI master in/slave out, Timer 1 channel 2, or GPIO with high sink output capability and O3 speed."+ },+ {+ "number": "18",+ "name": "PD1/SWIM",+ "type": "bidirectional",+ "description": "Port D1 configurable as SWIM data interface or GPIO with high sink output capability, O4 speed, and internal pull-up during reset phase."+ },+ {+ "number": "19",+ "name": "PD2/AIN3",+ "type": "bidirectional",+ "description": "Port D2 configurable as analog input 3, Timer 2 channel 3, or GPIO with high sink output capability and O3 speed."+ },+ {+ "number": "20",+ "name": "PD3/AIN4/TIM2_CH2/ADC_ETR",+ "type": "bidirectional",+ "description": "Port D3 configurable as analog input 4, Timer 2 channel 2, ADC external trigger, or GPIO with high sink output capability and O3 speed."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: PA1 and PA2 classification: These pins are classified as bidirectional I/O since they can function a"+ ],+ "pages_sent": 121,+ "cost_usd": 0.7598,+ "at": "2026-10-01T17:34:39"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588922750673301504",+ "pages": 121,+ "sha256": "ac23789ac0a2f408",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 20,+ "described": 20,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}