STM8L151F2P6

{
  "schema_version": 1,
  "type": "component",
  "slug": "stm8l151f2p6",
  "title": "STM8L151F2P6",
  "brief": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), TSSOP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "embedded processors & controllers",
    "stm8l151f2p6",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "STM8L151F2P6",
    "manufacturer": "STMicroelectronics",
    "package": "TSSOP-20",
    "pin_count": 20,
    "category": "Embedded Processors & Controllers",
    "subcategory": "Microcontrollers (MCU/MPU/SOC)",
    "datasheet": "https://www.st.com/resource/en/datasheet/stm8l151f2p6.pdf",
    "parts": {
      "symbol": "stm8l151f2p6.kicad_sym",
      "footprint": "stm8l151f2p6.kicad_mod",
      "model_3d": "stm8l151f2p6-hero.glb",
      "model_3d_plain": "stm8l151f2p6-etched.glb",
      "model_3d_step": "stm8l151f2p6-etched.step",
      "model_3d_step_plain": "stm8l151f2p6.step",
      "lbr": "stm8l151f2p6.lbr"
    },
    "distributor_links": {
      "lcsc": "C1339053",
      "digikey": "497-19223-ND",
      "mouser": "511-STM8L151F2P6"
    },
    "distributor_check": {
      "checked_at": "2026-11-05T23:40:48Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-19223-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "511-STM8L151F2P6",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PC5/OSC32_IN",
        "type": "bidirectional",
        "description": "Port C5 is a high-sink I/O that also serves as the LSE oscillator input, with alternates SPI1_NSS, USART_TX and TIM2_CH1 (20-pin packages only)."
      },
      {
        "number": "2",
        "name": "PC6/OSC32_OUT",
        "type": "bidirectional",
        "description": "Port C6 is a high-sink I/O that also serves as the LSE oscillator output, with alternates SPI_SCK, USART_RX and TIM2_CH2 (20-pin packages only)."
      },
      {
        "number": "3",
        "name": "PA0",
        "type": "bidirectional",
        "description": "Port A0 is the high-sink LED driver capable pin, input pull-up during reset and after reset release, with alternates USART_CK, SWIM input/output, BEEP output and infrared timer output."
      },
      {
        "number": "4",
        "name": "NRST/PA1",
        "type": "bidirectional",
        "description": "This pin is the reset input with pull-up at power-up (NRST), with an RPU of 30 to 60 kΩ and an input low level VIL(NRST) max of 0.8 V; as PA1 it can only be configured as output open-drain or push-pull."
      },
      {
        "number": "5",
        "name": "PA2",
        "type": "bidirectional",
        "description": "Port A2 is a high-sink I/O that also serves as the HSE oscillator input, with alternates USART_TX and SPI_MISO."
      },
      {
        "number": "6",
        "name": "PA3",
        "type": "bidirectional",
        "description": "Port A3 is a high-sink I/O that also serves as the HSE oscillator output, with alternates USART_RX and SPI_MOSI."
      },
      {
        "number": "7",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground voltage, also used as ADC1 negative voltage reference and analog ground (VSS / VREF- / VSSA)."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital supply voltage, also used as ADC1 positive voltage reference (VDD / VDDA / VREF+), with a 1.65 to 3.6 V operating supply range."
      },
      {
        "number": "9",
        "name": "PD0",
        "type": "bidirectional",
        "description": "Port D0 is a high-sink I/O that also provides Timer 3 channel 2, ADC1_TRIG, ADC1 input 22 and comparator positive inputs."
      },
      {
        "number": "10",
        "name": "PB0",
        "type": "bidirectional",
        "description": "Port B0 is a high-sink I/O with a pull-up applied during reset, which is then input floating after reset release, and provides Timer 2 channel 1 and ADC1 input 18."
      },
      {
        "number": "11",
        "name": "PB1",
        "type": "bidirectional",
        "description": "Port B1 is a high-sink I/O that also provides Timer 3 channel 1, ADC1 input 17 and comparator 1 positive input."
      },
      {
        "number": "12",
        "name": "PB2",
        "type": "bidirectional",
        "description": "Port B2 is a high-sink I/O that also provides Timer 2 channel 2, ADC1 input 16 and comparator 1 positive input."
      },
      {
        "number": "13",
        "name": "PB3",
        "type": "bidirectional",
        "description": "Port B3 is a high-sink I/O that also provides Timer 2 external trigger, ADC1 input 15, RTC alarm and comparator 1 positive input."
      },
      {
        "number": "14",
        "name": "PB4",
        "type": "bidirectional",
        "description": "Port B4 is a high-sink I/O with a pull-up applied during reset, which is then input floating after reset release, and provides SPI1 master/slave select, ADC1 input 14 and comparator 1 positive input."
      },
      {
        "number": "15",
        "name": "PB5",
        "type": "bidirectional",
        "description": "Port B5 is a high-sink I/O that also provides SPI clock, ADC1 input 13 and comparator 1 positive input."
      },
      {
        "number": "16",
        "name": "PB6",
        "type": "bidirectional",
        "description": "Port B6 is a high-sink I/O that also provides SPI1 master out/slave in, ADC1 input 12 and comparator 1 positive input."
      },
      {
        "number": "17",
        "name": "PB7",
        "type": "bidirectional",
        "description": "Port B7 is a high-sink I/O that also provides SPI1 master in/slave out, ADC1 input 11 and comparator 1 positive input."
      },
      {
        "number": "18",
        "name": "PC0",
        "type": "bidirectional",
        "description": "Port C0 is a 5 V tolerant (FT) I/O with true open-drain capability that also serves as the I2C data line (I2C_SDA)."
      },
      {
        "number": "19",
        "name": "PC1",
        "type": "bidirectional",
        "description": "Port C1 is a 5 V tolerant (FT) I/O with true open-drain capability that also serves as the I2C clock line (I2C_SCL)."
      },
      {
        "number": "20",
        "name": "PC4",
        "type": "bidirectional",
        "description": "Port C4 is a high-sink I/O that also provides USART synchronous clock, I2C1_SMB, configurable clock output (CCO), ADC1 input 4 and comparator inputs."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin-to-number assignments were read from the TSSOP20 column of Table 4 in a text extraction where th"
        ],
        "pages_sent": 45,
        "cost_usd": 0.0558,
        "at": "2026-11-05T23:40:39"
      },
      "datasheet": {
        "url": "https://www.st.com/resource/en/datasheet/stm8l151f2p6.pdf",
        "pages": 123,
        "sha256": "56a41f554888e763",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "stm8l151f2p6.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "stm8l151f2p6-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          6.5,
          1.2
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "29207890042ca956b162f16cbd0b84fabe44d02661a6c48582305d721833e448",
        "checked": "2026-11-05",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "STMicroelectronics",
      "Package": "TSSOP-20",
      "Category": "Embedded Processors & Controllers",
      "Pins": "20"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "datasheet_sha256": "56a41f554888e76314e03bf1e81ca2335774482ba6feb28c9e423059866cc4b8",
      "rows": [
        {
          "name": "External supply voltage (VDD, VDDA, VDDIO) VDD-VSS",
          "symbol": "VDD-VSS",
          "kind": "absolute_maximum",
          "unit": "V",
          "min": -0.3,
          "typ": null,
          "max": 4,
          "conditions": "",
          "source_page": 54,
          "source": "datasheet"
        },
        {
          "name": "Total current into VDD power line (source)",
          "symbol": "IVDD",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 80,
          "conditions": "",
          "source_page": 56,
          "source": "datasheet"
        },
        {
          "name": "Total current out of VSS ground line (sink)",
          "symbol": "IVSS",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 80,
          "conditions": "",
          "source_page": 56,
          "source": "datasheet"
        },
        {
          "name": "Output current sunk by any other I/O and control pin",
          "symbol": "IIO",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": 25,
          "conditions": "",
          "source_page": 56,
          "source": "datasheet"
        },
        {
          "name": "Output current sourced by any I/Os and control pin",
          "symbol": "IIO",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": null,
          "typ": null,
          "max": -25,
          "conditions": "",
          "source_page": 56,
          "source": "datasheet"
        },
        {
          "name": "Injected current on any other pin",
          "symbol": "IINJ(PIN)",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -5,
          "typ": null,
          "max": 5,
          "conditions": "",
          "source_page": 56,
          "source": "datasheet"
        },
        {
          "name": "Total injected current (sum of all I/O and control pins)",
          "symbol": "ΣIINJ(PIN)",
          "kind": "absolute_maximum",
          "unit": "mA",
          "min": -25,
          "typ": null,
          "max": 25,
          "conditions": "",
          "source_page": 56,
          "source": "datasheet"
        },
        {
          "name": "Storage temperature range",
          "symbol": "TSTG",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": -65,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 56,
          "source": "datasheet"
        },
        {
          "name": "Maximum junction temperature",
          "symbol": "TJ",
          "kind": "absolute_maximum",
          "unit": "°C",
          "min": null,
          "typ": null,
          "max": 150,
          "conditions": "",
          "source_page": 56,
          "source": "datasheet"
        },
        {
          "name": "System clock frequency",
          "symbol": "fSYSCLK",
          "kind": "recommended_operating",
          "unit": "MHz",
          "min": 0,
          "typ": null,
          "max": 16,
          "conditions": "1.65 V ≤ VDD < 3.6 V",
          "source_page": 57,
          "source": "datasheet"
        },
        {
          "name": "Standard operating voltage",
          "symbol": "VDD",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.65,
          "typ": null,
          "max": 3.6,
          "conditions": "Without BOR (1.8 V at power-up)",
          "source_page": 57,
          "source": "datasheet"
        },
        {
          "name": "Analog operating voltage",
          "symbol": "VDDA",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.65,
          "typ": null,
          "max": 3.6,
          "conditions": "ADC1 not used; must be at same potential as VDD",
          "source_page": 57,
          "source": "datasheet"
        },
        {
          "name": "Analog operating voltage",
          "symbol": "VDDA",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.8,
          "typ": null,
          "max": 3.6,
          "conditions": "ADC1 used",
          "source_page": 57,
          "source": "datasheet"
        },
        {
          "name": "Temperature range",
          "symbol": "TA",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 85,
          "conditions": "6 suffix version, 1.65 V ≤ VDD < 3.6 V",
          "source_page": 57,
          "source": "datasheet"
        },
        {
          "name": "Junction temperature range",
          "symbol": "TJ",
          "kind": "recommended_operating",
          "unit": "°C",
          "min": -40,
          "typ": null,
          "max": 105,
          "conditions": "-40 °C ≤ TA < 85 °C, 6 suffix version",
          "source_page": 57,
          "source": "datasheet"
        },
        {
          "name": "Power dissipation (TSSOP20)",
          "symbol": "PD",
          "kind": "recommended_operating",
          "unit": "mW",
          "min": null,
          "typ": null,
          "max": 181,
          "conditions": "TA = 85 °C, 6 suffix",
          "source_page": 57,
          "source": "datasheet"
        },
        {
          "name": "Power-down reset threshold",
          "symbol": "VPDR",
          "kind": "electrical",
          "unit": "V",
          "min": 1.3,
          "typ": 1.5,
          "max": 1.65,
          "conditions": "Falling edge",
          "source_page": 58,
          "source": "datasheet"
        },
        {
          "name": "Brown-out reset threshold 0 (falling edge)",
          "symbol": "VBOR0",
          "kind": "electrical",
          "unit": "V",
          "min": 1.66,
          "typ": 1.7,
          "max": 1.74,
          "conditions": "Falling edge, BOR_TH[2:0]=000",
          "source_page": 58,
          "source": "datasheet"
        },
        {
          "name": "Brown-out reset threshold 0 (rising edge)",
          "symbol": "VBOR0",
          "kind": "electrical",
          "unit": "V",
          "min": 1.69,
          "typ": 1.75,
          "max": 1.81,
          "conditions": "Rising edge, BOR_TH[2:0]=000",
          "source_page": 58,
          "source": "datasheet"
        },
        {
          "name": "Supply current in Run mode (code from RAM, HSI)",
          "symbol": "IDD(RUN)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 0.39,
          "max": 0.49,
          "conditions": "All peripherals OFF, fCPU = 125 kHz, max at 85 °C",
          "source_page": 60,
          "source": "datasheet"
        },
        {
          "name": "Supply current in Run mode (code from RAM, HSI)",
          "symbol": "IDD(RUN)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 1.85,
          "max": 2.12,
          "conditions": "All peripherals OFF, fCPU = 16 MHz, max at 85 °C",
          "source_page": 60,
          "source": "datasheet"
        },
        {
          "name": "Supply current in Run mode (code from Flash, HSI)",
          "symbol": "IDD(RUN)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 0.43,
          "max": 0.56,
          "conditions": "All peripherals OFF, fCPU = 125 kHz, max at 85 °C",
          "source_page": 60,
          "source": "datasheet"
        },
        {
          "name": "Supply current in Run mode (code from Flash, HSI)",
          "symbol": "IDD(RUN)",
          "kind": "electrical",
          "unit": "mA",
          "min": null,
          "typ": 3.8,
          "max": 4.75,
          "conditions": "All peripherals OFF, fCPU = 16 MHz, max at 85 °C",
          "source_page": 60,
          "source": "datasheet"
        },
        {
          "name": "Accuracy of HSI oscillator (factory calibrated)",
          "symbol": "ACCHSI",
          "kind": "tolerance",
          "unit": "%",
          "min": -1.5,
          "typ": null,
          "max": 1.5,
          "conditions": "VDD = 3.0 V, 0 °C ≤ TA ≤ 55 °C",
          "source_page": 75,
          "source": "datasheet"
        },
        {
          "name": "Accuracy of HSI oscillator (factory calibrated)",
          "symbol": "ACCHSI",
          "kind": "tolerance",
          "unit": "%",
          "min": -2.5,
          "typ": null,
          "max": 2,
          "conditions": "VDD = 3.0 V, -10 °C ≤ TA ≤ 85 °C",
          "source_page": 75,
          "source": "datasheet"
        },
        {
          "name": "LSI oscillator frequency",
          "symbol": "fLSI",
          "kind": "electrical",
          "unit": "kHz",
          "min": 26,
          "typ": 38,
          "max": 56,
          "conditions": "VDD = 1.65 V to 3.6 V",
          "source_page": 76,
          "source": "datasheet"
        },
        {
          "name": "LSI oscillator wakeup time",
          "symbol": "tsu(LSI)",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 200,
          "conditions": "",
          "source_page": 76,
          "source": "datasheet"
        },
        {
          "name": "LSI oscillator frequency drift",
          "symbol": "IDD(LSI)",
          "kind": "tolerance",
          "unit": "%",
          "min": -12,
          "typ": null,
          "max": 11,
          "conditions": "0 °C ≤ TA ≤ 85 °C",
          "source_page": 76,
          "source": "datasheet"
        },
        {
          "name": "Operating voltage (all modes, read/write/erase)",
          "symbol": "VDD",
          "kind": "recommended_operating",
          "unit": "V",
          "min": 1.65,
          "typ": null,
          "max": 3.6,
          "conditions": "fSYSCLK = 16 MHz",
          "source_page": 78,
          "source": "datasheet"
        },
        {
          "name": "Programming time for 1 or 64 bytes (block) erase/write cycles",
          "symbol": "tprog",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 6,
          "conditions": "On programmed byte",
          "source_page": 78,
          "source": "datasheet"
        },
        {
          "name": "Programming time for 1 to 64 bytes (block) write cycles",
          "symbol": "tprog",
          "kind": "timing",
          "unit": "ms",
          "min": null,
          "typ": null,
          "max": 3,
          "conditions": "On erased byte",
          "source_page": 78,
          "source": "datasheet"
        },
        {
          "name": "Data retention (program memory) after 10000 erase/write cycles",
          "symbol": "tRET",
          "kind": "electrical",
          "unit": "years",
          "min": 30,
          "typ": null,
          "max": null,
          "conditions": "TA = -40 to +85 °C, TRET = +85 °C (3 and 6 suffix)",
          "source_page": 78,
          "source": "datasheet"
        },
        {
          "name": "Erase/write cycles (program memory)",
          "symbol": "NRW",
          "kind": "electrical",
          "unit": "kcycles",
          "min": 10,
          "typ": null,
          "max": null,
          "conditions": "TA = -40 to +85 °C (3 and 6 suffix)",
          "source_page": 78,
          "source": "datasheet"
        },
        {
          "name": "Minimum supply voltage without losing RAM data",
          "symbol": "VRM",
          "kind": "electrical",
          "unit": "V",
          "min": 1.65,
          "typ": null,
          "max": null,
          "conditions": "Halt mode (or Reset)",
          "source_page": 78,
          "source": "datasheet"
        },
        {
          "name": "Input leakage current, high sink I/Os",
          "symbol": "Ilkg",
          "kind": "electrical",
          "unit": "nA",
          "min": null,
          "typ": null,
          "max": 50,
          "conditions": "VSS ≤ VIN ≤ VDD",
          "source_page": 80,
          "source": "datasheet"
        },
        {
          "name": "Input leakage current, true open drain I/Os",
          "symbol": "Ilkg",
          "kind": "electrical",
          "unit": "nA",
          "min": null,
          "typ": null,
          "max": 200,
          "conditions": "VSS ≤ VIN ≤ VDD",
          "source_page": 80,
          "source": "datasheet"
        },
        {
          "name": "Weak pull-up equivalent resistor",
          "symbol": "RPU",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 30,
          "typ": 45,
          "max": 60,
          "conditions": "VIN = VSS",
          "source_page": 80,
          "source": "datasheet"
        },
        {
          "name": "Output low level voltage for an I/O pin (high sink)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.45,
          "conditions": "IIO = +2 mA, VDD = 3.0 V",
          "source_page": 83,
          "source": "datasheet"
        },
        {
          "name": "Output low level voltage for an I/O pin (high sink)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.7,
          "conditions": "IIO = +10 mA, VDD = 3.0 V",
          "source_page": 83,
          "source": "datasheet"
        },
        {
          "name": "Output low level voltage for an I/O pin (true open drain)",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.45,
          "conditions": "IIO = +3 mA, VDD = 3.0 V",
          "source_page": 83,
          "source": "datasheet"
        },
        {
          "name": "Output low level voltage for PA0 with high sink LED driver",
          "symbol": "VOL",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.45,
          "conditions": "IIO = +20 mA, VDD = 2.0 V",
          "source_page": 83,
          "source": "datasheet"
        },
        {
          "name": "NRST input low level voltage",
          "symbol": "VIL(NRST)",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.8,
          "conditions": "",
          "source_page": 85,
          "source": "datasheet"
        },
        {
          "name": "NRST input high level voltage",
          "symbol": "VIH(NRST)",
          "kind": "electrical",
          "unit": "V",
          "min": 1.4,
          "typ": null,
          "max": null,
          "conditions": "",
          "source_page": 85,
          "source": "datasheet"
        },
        {
          "name": "NRST output low level voltage",
          "symbol": "VOL(NRST)",
          "kind": "electrical",
          "unit": "V",
          "min": null,
          "typ": null,
          "max": 0.4,
          "conditions": "IOL = 2 mA, 2.7 V ≤ VDD ≤ 3.6 V",
          "source_page": 85,
          "source": "datasheet"
        },
        {
          "name": "NRST pull-up equivalent resistor",
          "symbol": "RPU(NRST)",
          "kind": "electrical",
          "unit": "kΩ",
          "min": 30,
          "typ": 45,
          "max": 60,
          "conditions": "",
          "source_page": 85,
          "source": "datasheet"
        },
        {
          "name": "Reference voltage output (VREFINT)",
          "symbol": "VREFINT out",
          "kind": "electrical",
          "unit": "V",
          "min": 1.202,
          "typ": 1.224,
          "max": 1.242,
          "conditions": "",
          "source_page": 92,
          "source": "datasheet"
        },
        {
          "name": "Stability of VREFINT over temperature",
          "symbol": "STABVREFINT",
          "kind": "temperature_coefficient",
          "unit": "ppm/°C",
          "min": null,
          "typ": 20,
          "max": 50,
          "conditions": "-40 °C ≤ TA ≤ 125 °C",
          "source_page": 92,
          "source": "datasheet"
        },
        {
          "name": "ADC1 sampling clock frequency",
          "symbol": "fADC1",
          "kind": "electrical",
          "unit": "MHz",
          "min": 0.32,
          "typ": null,
          "max": 16,
          "conditions": "2.4 V ≤ VDDA ≤ 3.6 V, without zooming",
          "source_page": 95,
          "source": "datasheet"
        },
        {
          "name": "Wakeup time from OFF state (ADC1)",
          "symbol": "tWKUP",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": null,
          "max": 3,
          "conditions": "",
          "source_page": 95,
          "source": "datasheet"
        },
        {
          "name": "Comparator 1 startup time",
          "symbol": "tSTART",
          "kind": "timing",
          "unit": "µs",
          "min": null,
          "typ": 7,
          "max": 10,
          "conditions": "",
          "source_page": 93,
          "source": "datasheet"
        },
        {
          "name": "Comparator 1 offset error",
          "symbol": "Voffset",
          "kind": "tolerance",
          "unit": "mV",
          "min": -10,
          "typ": 3,
          "max": 10,
          "conditions": "",
          "source_page": 93,
          "source": "datasheet"
        },
        {
          "name": "Comparator 1 current consumption",
          "symbol": "ICOMP1",
          "kind": "electrical",
          "unit": "nA",
          "min": null,
          "typ": 160,
          "max": 260,
          "conditions": "Comparator consumption only",
          "source_page": 93,
          "source": "datasheet"
        },
        {
          "name": "SPI1 clock frequency (master mode)",
          "symbol": "fSCK",
          "kind": "timing",
          "unit": "MHz",
          "min": 0,
          "typ": null,
          "max": 8,
          "conditions": "Master mode",
          "source_page": 87,
          "source": "datasheet"
        },
        {
          "name": "SPI1 clock rise and fall time",
          "symbol": "tr(SCK), tf(SCK)",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 30,
          "conditions": "Capacitive load C = 30 pF",
          "source_page": 87,
          "source": "datasheet"
        },
        {
          "name": "NSS hold time",
          "symbol": "th(NSS)",
          "kind": "timing",
          "unit": "ns",
          "min": 80,
          "typ": null,
          "max": null,
          "conditions": "Slave mode",
          "source_page": 87,
          "source": "datasheet"
        },
        {
          "name": "Data input setup time",
          "symbol": "tsu(MI)",
          "kind": "timing",
          "unit": "ns",
          "min": 30,
          "typ": null,
          "max": null,
          "conditions": "Master mode",
          "source_page": 87,
          "source": "datasheet"
        },
        {
          "name": "Data output valid time",
          "symbol": "tv(SO)",
          "kind": "timing",
          "unit": "ns",
          "min": null,
          "typ": null,
          "max": 60,
          "conditions": "Slave mode (after enable edge)",
          "source_page": 87,
          "source": "datasheet"
        },
        {
          "name": "Thermal resistance junction-ambient TSSOP20",
          "symbol": "ΘJA",
          "kind": "thermal",
          "unit": "°C/W",
          "min": null,
          "typ": 110,
          "max": null,
          "conditions": "JEDEC JESD51-2, 4-layer PCB, natural convection",
          "source_page": 118,
          "source": "datasheet"
        }
      ]
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "stm8l151f2p6"
  ],
  "discovery_pitch": "STM8L151F2P6 (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray",
    "email": "[email protected]"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "stm8l151f2p6.kicad_sym",
    "stm8l151f2p6.kicad_mod",
    "stm8l151f2p6.glb",
    "stm8l151f2p6.step",
    "stm8l151f2p6.lbr",
    "docs/hero.png",
    "docs/stm8l151f2p6-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "stm8l151f2p6-hero.glb",
    "stm8l151f2p6-hero.overlay.json",
    "stm8l151f2p6-etched.glb"
  ],
  "visibility": {
    "public": true
  }
}