component
STM8AL3L68TCY
Public Made by Adomby adom
STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+84@@ -0,0 +1,84 @@+# STM8AL3L68TCY++**STMicroelectronics** · Microcontrollers (MCU/MPU/SOC) · LQFP-48(7x7)++STM8AL3L68TCY from STMicroelectronics, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | PA0 | bidirectional | Port A0 (input pull-up in and after reset) with SWIM input/output, [USART1_CK] remap, Beep output and IR timer output, high sink LED driver capability. |+| 2 | NRST/PA1 | bidirectional | Reset input with pull-up at power-up; usable only as push-pull output PA1, not as open drain or general purpose input. |+| 3 | PA2 | bidirectional | Port A2 with HSE oscillator input OSC_IN, [USART1_TX] and [SPI1_MISO] remap options. |+| 4 | PA3 | bidirectional | Port A3 with HSE oscillator output OSC_OUT, [USART1_RX] and [SPI1_MOSI] remap options. |+| 5 | PA4 | bidirectional | Port A4 (3.6 V tolerant) with TIM2_BKIN, LCD_COM0, ADC1_IN2 and COMP1_INP. |+| 6 | PA5 | bidirectional | Port A5 (3.6 V tolerant) with TIM3_BKIN, LCD_COM1, ADC1_IN1 and COMP1_INP. |+| 7 | PA6 | bidirectional | Port A6 (3.6 V tolerant) with [ADC1_TRIG], LCD_COM2, ADC1_IN0 and COMP1_INP. |+| 8 | PA7 | bidirectional | Port A7 (five-volt tolerant) with LCD segment 0. |+| 9 | VSS1/VSSA/VREF- | power_in | I/O ground, analog ground and ADC1 negative voltage reference. |+| 10 | VDD1 | power_in | Digital power supply. |+| 11 | VDDA | power_in | Analog supply voltage. |+| 12 | VREF+ | power_in | ADC1 and DAC positive voltage reference. |+| 13 | VLCD | passive | LCD booster external capacitor pin (STM8AL3Lxx); the same pin is Reserved and must be tied to VDD on STM8AL31xx. |+| 14 | PE0 | bidirectional | Port E0 (five-volt tolerant) with LCD segment 1. |+| 15 | PE1 | bidirectional | Port E1 (3.6 V tolerant) with TIM1_CH2N and LCD segment 2. |+| 16 | PE2 | bidirectional | Port E2 (3.6 V tolerant) with TIM1_CH3N and LCD segment 3. |+| 17 | PE3 | bidirectional | Port E3 (3.6 V tolerant) with LCD segment 4. |+| 18 | PE4 | bidirectional | Port E4 (3.6 V tolerant) with LCD segment 5. |+| 19 | PE5 | bidirectional | Port E5 (3.6 V tolerant) with LCD segment 6, ADC1_IN23, COMP2_INP and COMP1_INP. |+| 20 | PD0 | bidirectional | Port D0 (3.6 V tolerant) with TIM3_CH2, [ADC1_TRIG], LCD segment 7, ADC1_IN22, COMP2_INP and COMP1_INP. |+| 21 | PD1 | bidirectional | Port D1 (3.6 V tolerant) with TIM3_ETR, LCD_COM3, ADC1_IN21, COMP2_INP and COMP1_INP. |+| 22 | PD2 | bidirectional | Port D2 (3.6 V tolerant) with TIM1_CH1, LCD segment 8, ADC1_IN20 and COMP1_INP. |+| 23 | PD3 | bidirectional | Port D3 (3.6 V tolerant) with TIM1_ETR, LCD segment 9, ADC1_IN19 and COMP1_INP. |+| 24 | PB0 | bidirectional | Port B0 (3.6 V tolerant, pull-up applied during reset, floating input after) with TIM2_CH1, LCD segment 10, ADC1_IN18 and COMP1_INP. |+| 25 | PB1 | bidirectional | Port B1 (3.6 V tolerant) with TIM3_CH1, LCD segment 11, ADC1_IN17 and COMP1_INP. |+| 26 | PB2 | bidirectional | Port B2 (3.6 V tolerant) with TIM2_CH2, LCD segment 12, ADC1_IN16 and COMP1_INP. |+| 27 | PB3 | bidirectional | Port B3 (3.6 V tolerant) with TIM2_ETR, LCD segment 13, ADC1_IN15 and COMP1_INP. |+| 28 | PB4 | bidirectional | Port B4 (3.6 V tolerant, pull-up during reset) with [SPI1_NSS], LCD segment 14, ADC1_IN14 and COMP1_INP. |+| 29 | PB5 | bidirectional | Port B5 (3.6 V tolerant) with [SPI1_SCK], LCD segment 15, ADC1_IN13 and COMP1_INP. |+| 30 | PB6 | bidirectional | Port B6 (3.6 V tolerant) with [SPI1_MOSI], LCD segment 16, ADC1_IN12 and COMP1_INP. |+| 31 | PB7 | bidirectional | Port B7 (3.6 V tolerant) with [SPI1_MISO], LCD segment 17, ADC1_IN11 and COMP1_INP. |+| 32 | PF0 | bidirectional | Port F0 (3.6 V tolerant) with ADC1_IN24 and DAC_OUT. |+| 33 | PD4 | bidirectional | Port D4 (3.6 V tolerant) with TIM1_CH2, LCD segment 18, ADC1_IN10 and COMP1_INP. |+| 34 | PD5 | bidirectional | Port D5 (3.6 V tolerant) with TIM1_CH3, LCD segment 19, ADC1_IN9 and COMP1_INP. |+| 35 | PD6 | bidirectional | Port D6 (3.6 V tolerant) with TIM1_BKIN, LCD segment 20, ADC1_IN8, RTC_CALIB, VREFINT output and COMP1_INP. |+| 36 | PD7 | bidirectional | Port D7 (3.6 V tolerant) with TIM1_CH1N, LCD segment 21, ADC1_IN7, RTC_ALARM, VREFINT output and COMP1_INP. |+| 37 | PC0 | bidirectional | Port C0 (five-volt tolerant, true open drain) with I2C1_SDA data. |+| 38 | PC1 | bidirectional | Port C1 (five-volt tolerant, true open drain) with I2C1_SCL clock. |+| 39 | VDD2 | power_in | IOs supply voltage. |+| 40 | VSS2 | power_in | IOs ground voltage. |+| 41 | PC2 | bidirectional | Port C2 (3.6 V tolerant) with USART1_RX, LCD segment 22, ADC1_IN6, COMP1_INP and VREFINT output. |+| 42 | PC3 | bidirectional | Port C3 (3.6 V tolerant) with USART1_TX, LCD segment 23, ADC1_IN5, COMP1_INP and COMP2_INM. |+| 43 | PC4 | bidirectional | Port C4 (3.6 V tolerant) with USART1_CK, I2C1_SMB, CCO, LCD segment 24, ADC1_IN4, COMP2_INM and COMP1_INP. |+| 44 | PC5 | bidirectional | Port C5 with LSE oscillator input OSC32_IN, [SPI1_NSS] and [USART1_TX] remap options. |+| 45 | PC6 | bidirectional | Port C6 with LSE oscillator output OSC32_OUT, [SPI1_SCK] and [USART1_RX] remap options. |+| 46 | PC7 | bidirectional | Port C7 (3.6 V tolerant) with LCD segment 25, ADC1_IN3, COMP2_INM and COMP1_INP. |+| 47 | PE6 | bidirectional | Port E6 (3.6 V tolerant) with LCD segment 26 and PVD_IN. |+| 48 | PE7 | bidirectional | Port E7 (3.6 V tolerant) with LCD segment 27. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LQFP-48(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `STM8AL3L68TCY`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `stm8al3l68tcy-etched.step` / `stm8al3l68tcy-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm8al3l68tcy.step` / `stm8al3l68tcy.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923410483593216) (123 pp, sha256 `c556f7a6ad75fcd6`, retrieved 2026-10-07, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm8al3l68tcy-datasheet.pdf)
page.jsonadded+441@@ -0,0 +1,441 @@+{+ "slug": "stm8al3l68tcy",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Microcontrollers (MCU/MPU/SOC), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "embedded processors & controllers",+ "stm8al3l68tcy",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "stm8al3l68tcy.kicad_sym",+ "stm8al3l68tcy.kicad_mod",+ "stm8al3l68tcy.glb",+ "stm8al3l68tcy.step",+ "stm8al3l68tcy.lbr",+ "docs/hero.png",+ "docs/stm8al3l68tcy-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "stm8al3l68tcy-hero.glb",+ "stm8al3l68tcy-hero.overlay.json"+ ],+ "component": {+ "mpn": "STM8AL3L68TCY",+ "manufacturer": "STMicroelectronics",+ "package": "LQFP-48(7x7)",+ "pin_count": 48,+ "category": "Embedded Processors & Controllers",+ "subcategory": "Microcontrollers (MCU/MPU/SOC)",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923410483593216",+ "parts": {+ "symbol": "stm8al3l68tcy.kicad_sym",+ "footprint": "stm8al3l68tcy.kicad_mod",+ "model_3d": "stm8al3l68tcy-hero.glb",+ "model_3d_plain": "stm8al3l68tcy.glb",+ "model_3d_step": "stm8al3l68tcy-etched.step",+ "model_3d_step_plain": "stm8al3l68tcy.step",+ "lbr": "stm8al3l68tcy.lbr"+ },+ "distributor_links": {+ "lcsc": "C1340718",+ "digikey": "497-15824-ND",+ "mouser": "511-STM8AL3L68TCY"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T21:54:02Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-15824-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-STM8AL3L68TCY",+ "status": "found",+ "lifecycle": "End of Life"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "PA0",+ "type": "bidirectional",+ "description": "Port A0 (input pull-up in and after reset) with SWIM input/output, [USART1_CK] remap, Beep output and IR timer output, high sink LED driver capability."+ },+ {+ "number": "2",+ "name": "NRST/PA1",+ "type": "bidirectional",+ "description": "Reset input with pull-up at power-up; usable only as push-pull output PA1, not as open drain or general purpose input."+ },+ {+ "number": "3",+ "name": "PA2",+ "type": "bidirectional",+ "description": "Port A2 with HSE oscillator input OSC_IN, [USART1_TX] and [SPI1_MISO] remap options."+ },+ {+ "number": "4",+ "name": "PA3",+ "type": "bidirectional",+ "description": "Port A3 with HSE oscillator output OSC_OUT, [USART1_RX] and [SPI1_MOSI] remap options."+ },+ {+ "number": "5",+ "name": "PA4",+ "type": "bidirectional",+ "description": "Port A4 (3.6 V tolerant) with TIM2_BKIN, LCD_COM0, ADC1_IN2 and COMP1_INP."+ },+ {+ "number": "6",+ "name": "PA5",+ "type": "bidirectional",+ "description": "Port A5 (3.6 V tolerant) with TIM3_BKIN, LCD_COM1, ADC1_IN1 and COMP1_INP."+ },+ {+ "number": "7",+ "name": "PA6",+ "type": "bidirectional",+ "description": "Port A6 (3.6 V tolerant) with [ADC1_TRIG], LCD_COM2, ADC1_IN0 and COMP1_INP."+ },+ {+ "number": "8",+ "name": "PA7",+ "type": "bidirectional",+ "description": "Port A7 (five-volt tolerant) with LCD segment 0."+ },+ {+ "number": "9",+ "name": "VSS1/VSSA/VREF-",+ "type": "power_in",+ "description": "I/O ground, analog ground and ADC1 negative voltage reference."+ },+ {+ "number": "10",+ "name": "VDD1",+ "type": "power_in",+ "description": "Digital power supply."+ },+ {+ "number": "11",+ "name": "VDDA",+ "type": "power_in",+ "description": "Analog supply voltage."+ },+ {+ "number": "12",+ "name": "VREF+",+ "type": "power_in",+ "description": "ADC1 and DAC positive voltage reference."+ },+ {+ "number": "13",+ "name": "VLCD",+ "type": "passive",+ "description": "LCD booster external capacitor pin (STM8AL3Lxx); the same pin is Reserved and must be tied to VDD on STM8AL31xx."+ },+ {+ "number": "14",+ "name": "PE0",+ "type": "bidirectional",+ "description": "Port E0 (five-volt tolerant) with LCD segment 1."+ },+ {+ "number": "15",+ "name": "PE1",+ "type": "bidirectional",+ "description": "Port E1 (3.6 V tolerant) with TIM1_CH2N and LCD segment 2."+ },+ {+ "number": "16",+ "name": "PE2",+ "type": "bidirectional",+ "description": "Port E2 (3.6 V tolerant) with TIM1_CH3N and LCD segment 3."+ },+ {+ "number": "17",+ "name": "PE3",+ "type": "bidirectional",+ "description": "Port E3 (3.6 V tolerant) with LCD segment 4."+ },+ {+ "number": "18",+ "name": "PE4",+ "type": "bidirectional",+ "description": "Port E4 (3.6 V tolerant) with LCD segment 5."+ },+ {+ "number": "19",+ "name": "PE5",+ "type": "bidirectional",+ "description": "Port E5 (3.6 V tolerant) with LCD segment 6, ADC1_IN23, COMP2_INP and COMP1_INP."+ },+ {+ "number": "20",+ "name": "PD0",+ "type": "bidirectional",+ "description": "Port D0 (3.6 V tolerant) with TIM3_CH2, [ADC1_TRIG], LCD segment 7, ADC1_IN22, COMP2_INP and COMP1_INP."+ },+ {+ "number": "21",+ "name": "PD1",+ "type": "bidirectional",+ "description": "Port D1 (3.6 V tolerant) with TIM3_ETR, LCD_COM3, ADC1_IN21, COMP2_INP and COMP1_INP."+ },+ {+ "number": "22",+ "name": "PD2",+ "type": "bidirectional",+ "description": "Port D2 (3.6 V tolerant) with TIM1_CH1, LCD segment 8, ADC1_IN20 and COMP1_INP."+ },+ {+ "number": "23",+ "name": "PD3",+ "type": "bidirectional",+ "description": "Port D3 (3.6 V tolerant) with TIM1_ETR, LCD segment 9, ADC1_IN19 and COMP1_INP."+ },+ {+ "number": "24",+ "name": "PB0",+ "type": "bidirectional",+ "description": "Port B0 (3.6 V tolerant, pull-up applied during reset, floating input after) with TIM2_CH1, LCD segment 10, ADC1_IN18 and COMP1_INP."+ },+ {+ "number": "25",+ "name": "PB1",+ "type": "bidirectional",+ "description": "Port B1 (3.6 V tolerant) with TIM3_CH1, LCD segment 11, ADC1_IN17 and COMP1_INP."+ },+ {+ "number": "26",+ "name": "PB2",+ "type": "bidirectional",+ "description": "Port B2 (3.6 V tolerant) with TIM2_CH2, LCD segment 12, ADC1_IN16 and COMP1_INP."+ },+ {+ "number": "27",+ "name": "PB3",+ "type": "bidirectional",+ "description": "Port B3 (3.6 V tolerant) with TIM2_ETR, LCD segment 13, ADC1_IN15 and COMP1_INP."+ },+ {+ "number": "28",+ "name": "PB4",+ "type": "bidirectional",+ "description": "Port B4 (3.6 V tolerant, pull-up during reset) with [SPI1_NSS], LCD segment 14, ADC1_IN14 and COMP1_INP."+ },+ {+ "number": "29",+ "name": "PB5",+ "type": "bidirectional",+ "description": "Port B5 (3.6 V tolerant) with [SPI1_SCK], LCD segment 15, ADC1_IN13 and COMP1_INP."+ },+ {+ "number": "30",+ "name": "PB6",+ "type": "bidirectional",+ "description": "Port B6 (3.6 V tolerant) with [SPI1_MOSI], LCD segment 16, ADC1_IN12 and COMP1_INP."+ },+ {+ "number": "31",+ "name": "PB7",+ "type": "bidirectional",+ "description": "Port B7 (3.6 V tolerant) with [SPI1_MISO], LCD segment 17, ADC1_IN11 and COMP1_INP."+ },+ {+ "number": "32",+ "name": "PF0",+ "type": "bidirectional",+ "description": "Port F0 (3.6 V tolerant) with ADC1_IN24 and DAC_OUT."+ },+ {+ "number": "33",+ "name": "PD4",+ "type": "bidirectional",+ "description": "Port D4 (3.6 V tolerant) with TIM1_CH2, LCD segment 18, ADC1_IN10 and COMP1_INP."+ },+ {+ "number": "34",+ "name": "PD5",+ "type": "bidirectional",+ "description": "Port D5 (3.6 V tolerant) with TIM1_CH3, LCD segment 19, ADC1_IN9 and COMP1_INP."+ },+ {+ "number": "35",+ "name": "PD6",+ "type": "bidirectional",+ "description": "Port D6 (3.6 V tolerant) with TIM1_BKIN, LCD segment 20, ADC1_IN8, RTC_CALIB, VREFINT output and COMP1_INP."+ },+ {+ "number": "36",+ "name": "PD7",+ "type": "bidirectional",+ "description": "Port D7 (3.6 V tolerant) with TIM1_CH1N, LCD segment 21, ADC1_IN7, RTC_ALARM, VREFINT output and COMP1_INP."+ },+ {+ "number": "37",+ "name": "PC0",+ "type": "bidirectional",+ "description": "Port C0 (five-volt tolerant, true open drain) with I2C1_SDA data."+ },+ {+ "number": "38",+ "name": "PC1",+ "type": "bidirectional",+ "description": "Port C1 (five-volt tolerant, true open drain) with I2C1_SCL clock."+ },+ {+ "number": "39",+ "name": "VDD2",+ "type": "power_in",+ "description": "IOs supply voltage."+ },+ {+ "number": "40",+ "name": "VSS2",+ "type": "power_in",+ "description": "IOs ground voltage."+ },+ {+ "number": "41",+ "name": "PC2",+ "type": "bidirectional",+ "description": "Port C2 (3.6 V tolerant) with USART1_RX, LCD segment 22, ADC1_IN6, COMP1_INP and VREFINT output."+ },+ {+ "number": "42",+ "name": "PC3",+ "type": "bidirectional",+ "description": "Port C3 (3.6 V tolerant) with USART1_TX, LCD segment 23, ADC1_IN5, COMP1_INP and COMP2_INM."+ },+ {+ "number": "43",+ "name": "PC4",+ "type": "bidirectional",+ "description": "Port C4 (3.6 V tolerant) with USART1_CK, I2C1_SMB, CCO, LCD segment 24, ADC1_IN4, COMP2_INM and COMP1_INP."+ },+ {+ "number": "44",+ "name": "PC5",+ "type": "bidirectional",+ "description": "Port C5 with LSE oscillator input OSC32_IN, [SPI1_NSS] and [USART1_TX] remap options."+ },+ {+ "number": "45",+ "name": "PC6",+ "type": "bidirectional",+ "description": "Port C6 with LSE oscillator output OSC32_OUT, [SPI1_SCK] and [USART1_RX] remap options."+ },+ {+ "number": "46",+ "name": "PC7",+ "type": "bidirectional",+ "description": "Port C7 (3.6 V tolerant) with LCD segment 25, ADC1_IN3, COMP2_INM and COMP1_INP."+ },+ {+ "number": "47",+ "name": "PE6",+ "type": "bidirectional",+ "description": "Port E6 (3.6 V tolerant) with LCD segment 26 and PVD_IN."+ },+ {+ "number": "48",+ "name": "PE7",+ "type": "bidirectional",+ "description": "Port E7 (3.6 V tolerant) with LCD segment 27."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The Figure 4 pin-position text is scrambled in the extracted datasheet, so the pin-to-number mapping; Table 5 extraction was ambiguous for pins 3 and 4 (printed as '32 2' and '43 3') and for the non-LCD; Pin 13 is VLCD only on the LCD variant (STM8AL3Lx8T), which matches the MPN (3L, 8 = 48 pins, T = LQ"+ ],+ "pages_sent": 44,+ "cost_usd": 0.2295,+ "at": "2026-10-07T21:53:37"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588923410483593216",+ "pages": 123,+ "sha256": "c556f7a6ad75fcd6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 48,+ "described": 48,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "stm8al3l68tcy.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9,+ 9,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9dea352d93177c2904afd7d7b68ea8855ce1ab691f69f8b3e13655600514b6bf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "stm8al3l68tcy-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 9,+ 9,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6e46d120f782cf400d582d71059c63aeeab6cb3aa6fa2ed657a098d44d65fcac",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}