main
Ray Publish 0.1.0 93b1232

STM8AF6246TCSSSY

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)

STM8AF6246TCSSSY from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NRST bidirectional Reset pin with an on-chip pull-up of 30 to 60 kΩ; input low level is VSS to 0.3×VDD and input high level is 0.7×VDD to VDD.
2 PA1/OSCIN bidirectional Port A1 standard I/O (up to 2 MHz) that doubles as the HSE crystal input or external clock input OSCIN, with a 0 to 16 MHz external clock range.
3 PA2/OSCOUT bidirectional Port A2 standard I/O (up to 2 MHz) that doubles as the HSE crystal/resonator output OSCOUT for 1 to 16 MHz crystals.
4 VSS power_in Digital ground; all power (VDD, VDDIO, VDDA) and ground (VSS, VSSIO, VSSA) pins must always be connected to the external supply.
5 VCAP passive Connection for the 1.8 V main regulator external capacitor CEXT, which must be 470 nF to 3300 nF with ESR of 0.3 Ω max at 1 MHz and ESL of 15 nH max.
6 VDD power_in Digital power supply with a standard operating range of 3.0 V to 5.5 V; the VDDx to VSS absolute maximum is 6.5 V.
7 VDDIO power_in I/O power supply with a standard operating range of 3.0 V to 5.5 V.
8 PF4/AIN12 bidirectional Port F4 I/O (standard speed) that is also analog input AIN12, which is not selectable in ADC scan mode or with the analog watchdog; its pull-up is enabled during the reset phase.
9 VDDA power_in Analog power supply for the 10-bit ADC, specified from 3 V to 5.5 V.
10 VSSA power_in Analog ground for the 10-bit ADC; it must be connected to the external ground.
11 PB5/AIN5 bidirectional Port B5 I/O with analog input AIN5; its alternate function is I2C_SDA when the AFR6 remap option is set.
12 PB4/AIN4 bidirectional Port B4 I/O with analog input AIN4; its alternate function is I2C_SCL when the AFR6 remap option is set.
13 PB3/AIN3 bidirectional Port B3 I/O with analog input AIN3; its alternate function is TIM1_ETR when the AFR5 remap option is set.
14 PB2/AIN2 bidirectional Port B2 I/O with analog input AIN2; its alternate function is TIM1_CH3N when the AFR5 remap option is set.
15 PB1/AIN1 bidirectional Port B1 I/O with analog input AIN1; its alternate function is TIM1_CH2N when the AFR5 remap option is set.
16 PB0/AIN0 bidirectional Port B0 I/O with analog input AIN0; its alternate function is TIM1_CH1N when the AFR5 remap option is set.
17 PE5/SPI_NSS bidirectional Port E5 standard I/O used as the SPI master/slave select (NSS) pin.
18 PC1/TIM1_CH1 bidirectional Port C1 high-sink I/O (8 mA) that carries the Timer 1 channel 1 signal.
19 PC2/TIM1_CH2 bidirectional Port C2 high-sink I/O (8 mA) that carries the Timer 1 channel 2 signal.
20 PC3/TIM1_CH3 bidirectional Port C3 high-sink I/O (8 mA) that carries the Timer 1 channel 3 signal.
21 PC4/TIM1_CH4 bidirectional Port C4 high-sink I/O (8 mA) that carries the Timer 1 channel 4 signal.
22 PC5/SPI_SCK bidirectional Port C5 standard I/O used as the SPI clock.
23 PC6/SPI_MOSI bidirectional Port C6 standard I/O used as the SPI master out / slave in data line.
24 PC7/SPI_MISO bidirectional Port C7 standard I/O used as the SPI master in / slave out data line.
25 PD0/TIM3_CH2 bidirectional Port D0 high-sink I/O (8 mA) with Timer 3 channel 2; AFR3 remaps it to TIM1_BKIN and AFR2 to CLK_CCO, with AFR2 taking priority.
26 PD1/SWIM bidirectional Port D1 high-sink I/O (8 mA) used as the SWIM data interface, which is in input pull-up during reset and after reset release.
27 PD2/TIM3_CH1 bidirectional Port D2 high-sink I/O (8 mA) with Timer 3 channel 1; AFR1 remaps it to TIM2_CH3.
28 PD3/TIM2_CH2 bidirectional Port D3 high-sink I/O (8 mA) with Timer 2 channel 2; AFR0 remaps it to ADC_ETR.
29 PD4/TIM2_CH1/BEEP bidirectional Port D4 high-sink I/O (8 mA) with Timer 2 channel 1; AFR7 remaps it to the BEEP output (1, 2 or 4 kHz).
30 PD5/LINUART_TX bidirectional Port D5 standard I/O used as the LINUART data transmit pin.
31 PD6/LINUART_RX bidirectional Port D6 standard I/O used as the LINUART data receive pin.
32 PD7/TLI bidirectional Port D7 standard I/O that triggers the top level interrupt TLI when configured as an interrupt pin.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-32(7x7)
Category Embedded Processors & Controllers
Pins 32

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Internal CPU clock frequency fCPU 0 16 MHz TA = -40 °C to 150 °C 52
Standard operating voltage VDD/VDDIO 3 5.5 V 52
CEXT: capacitance of external capacitor VCAP 470 3300 nF 52
ESR of external capacitor 0.3 Ω at 1 MHz 52
ESL of external capacitor 15 nH 52
Power dissipation LQFP32 PD 85 mW all temperature ranges 52
Ambient temperature, suffix C TA -40 125 °C Suffix C 52
Junction temperature range, suffix C TJ 130 °C Suffix C 52
VDD rise time rate tVDD 2 µs/V 53
Power-on reset threshold VIT+ 2.65 2.8 2.95 V 53
Brown-out reset threshold VIT- 2.58 2.73 2.88 V 53
Reset release delay tTEMP 1 1.7 ms VDD rising 53
Supply current in Run mode IDD(RUN) 7.4 14 mA Code in Flash, HSE external clock, all peripherals clocked, fCPU = 16 MHz 54
Supply current in Run mode IDD(RUN) 4 7.4 mA Code in Flash, HSE external clock, all peripherals clocked, fCPU = 8 MHz (max not tested in production) 54
Supply current in Run mode IDD(RUN) 2.4 4.1 mA Code in Flash, HSE external clock, all peripherals clocked, fCPU = 4 MHz (max not tested in production) 54
Supply current in Run mode IDD(RUN) 1.5 2.5 mA Code in Flash, HSE external clock, all peripherals clocked, fCPU = 2 MHz 54
Supply current in Run mode IDD(RUN) 3.7 5 mA Code in RAM and EEPROM, HSE external clock, all peripherals clocked, fCPU = 16 MHz 54
Supply current in Run mode IDD(RUN) 2.2 3 mA Code in RAM and EEPROM, HSE external clock, all peripherals clocked, fCPU = 8 MHz (max not tested in production) 54
Supply current in Run mode IDD(RUN) 1.4 2 mA Code in RAM and EEPROM, HSE external clock, all peripherals clocked, fCPU = 4 MHz (max not tested in production) 54
Supply current in Run mode IDD(RUN) 1 1.5 mA Code in RAM and EEPROM, HSE external clock, all peripherals clocked, fCPU = 2 MHz 54
Supply current in Wait mode IDD(WFI) 1.65 2.5 mA CPU stopped, all peripherals off, HSE external clock, fCPU = 16 MHz 54
Supply current in Wait mode IDD(WFI) 1.15 1.9 mA CPU stopped, all peripherals off, HSE external clock, fCPU = 8 MHz (max not tested in production) 54
Supply current in Wait mode IDD(WFI) 0.9 1.6 mA CPU stopped, all peripherals off, HSE external clock, fCPU = 4 MHz (max not tested in production) 54
Supply current in Wait mode IDD(WFI) 0.8 1.5 mA CPU stopped, all peripherals off, HSE external clock, fCPU = 2 MHz 54
Supply current in Slow mode IDD(SLOW) 1.5 1.95 mA fCPU scaled down, all peripherals off, code in RAM, external clock 16 MHz, fCPU = 125 kHz 54
Supply current in Slow mode IDD(SLOW) 1.5 1.8 mA fCPU scaled down, all peripherals off, code in RAM, LSI internal RC, fCPU = 128 kHz (max not tested in production) 54
Supply current in Halt mode IDD(H) 5 35 µA Halt, main regulator off, flash power-down, clocks stopped; TA = -40 to 55 °C 55
Supply current in Active-halt mode with regulator on IDD(AH) 770 900 µA Main regulator on, flash operating, ext. clock 16 MHz, fMASTER = 125 kHz 55
Supply current in Active-halt mode with regulator on IDD(AH) 150 230 µA Main regulator on, flash operating, LSI clock 128 kHz 55
Wakeup time from Active-halt mode with regulator on tWU(AH) 10 30 µs Main regulator on, operating mode, TA = -40 to 150 °C 55
Wakeup time from Active-halt mode with regulator off tWU(AH) 50 80 µs Main regulator off 55
HSE oscillator current consumption IDD(OSC) 1 2 mA Quartz or ceramic resonator, CL = 33 pF, VDD = 5 V, fOSC = 24 MHz (max informative) 55
HSE oscillator current consumption IDD(OSC) 0.5 1 mA Quartz or ceramic resonator, CL = 33 pF, VDD = 3.3 V, fOSC = 24 MHz (max informative) 55
Programming current consumption IDD(PROG) 1 1.7 mA VDD = 5 V, -40 °C to 150 °C, erasing and programming data or Flash program memory 56
HSE user external clock source frequency fHSE_ext 0 16 MHz TA is -40 to 150 °C 57
OSCIN input leakage current ILEAK_HSE -1 1 µA VSS < VIN < VDD 57
Recommended load capacitance CL1/CL2 20 pF 58
HSI oscillator accuracy (factory calibrated) ACCHS -5 5 % 3.0 V ≤ VDD ≤ 5.5 V, -40 °C ≤ TA ≤ 150 °C 60
LSI frequency fLSI 112 128 144 kHz 60
Operating voltage (all modes, execution/write/erase) VDD 3 5.5 V fCPU is 0 to 16 MHz with 0 ws 62
Operating voltage (code execution) VDD 2.6 5.5 V fCPU is 0 to 16 MHz with 0 ws 62
Standard programming time (including erase) for byte/word/block tprog 6 6.6 ms 1 byte/4 bytes/128 bytes 62
Flash program memory endurance (erase/write cycles) NWE 1000 cycles TA = 25 °C 62
Data memory endurance (erase/write cycles) NWE 100 k cycles TA = -40 °C to 125 °C 62
Data memory endurance (erase/write cycles) NWE 300 k cycles TA = 25 °C 62
Input low level voltage VIL -0.3 V 63
Output low level voltage, high sink and true open drain I/O VOL 0.5 V VDD = 5 V, I = 8 mA 63
Output low level voltage, standard I/O VOL 0.6 V VDD = 5 V, I = 3 mA 63
Output low level voltage, standard I/O VOL 0.4 V VDD = 3 V, I = 1.5 mA 63
Pull-up resistor Rpu 35 50 65 kΩ VDD = 5 V, VIN = VSS 63
Digital input pad leakage current Ilkg -1 1 µA VSS ≤ VIN ≤ VDD 63
Analog input pad leakage current Ilkg ana -250 250 nA VSS ≤ VIN ≤ VDD, -40 °C < TA < 125 °C 63
Total current on either VDDIO or VSSIO IDDIO 60 mA Including injection currents 63
Supply voltage (including VDDA and VDDIO) VDDx - VSS -0.3 6.5 V 50
Storage temperature range TSTG -65 150 °C 51
Maximum junction temperature TJ 160 °C 51
Output current sunk by any I/O and control pin IIO 20 mA 51
NRST pull-up resistor RPU(NRST) 30 40 60 kΩ 67
Thermal resistance junction-ambient, LQFP 32 - 7 x 7 mm ΘJA 59 °C/W JEDEC JESD51-2, 4-layer PCB, natural convection 88

CAD (KiCad official)

  • Symbol: STM8AF6246TCSSSY
  • Footprint: Package_QFP:LQFP-32_7x7mm_P0.8mm
  • 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm8af6246tcsssy-etched.step / stm8af6246tcsssy-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm8af6246tcsssy.step / stm8af6246tcsssy.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (99 pp, sha256 b2515811c84033b5, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF