main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm8af6246tasssx: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm8af6246tasssx-etched.glb Publish 0.1.0 · Ray
stm8af6246tasssx-etched.step stm8af6246tasssx: factory component page (tier=lcsc) · Ray
stm8af6246tasssx-hero.glb stm8af6246tasssx: hero GLB from the etched model (keeps the MPN mark) · Ray
stm8af6246tasssx-hero.overlay.json Publish 0.1.0 · Ray
stm8af6246tasssx.glb Publish 0.1.0 · Ray
stm8af6246tasssx.kicad_mod Publish 0.1.0 · Ray
stm8af6246tasssx.kicad_sym Publish 0.1.0 · Ray
stm8af6246tasssx.lbr Publish 0.1.0 · Ray
stm8af6246tasssx.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 32 pins · Ray

STM8AF6246TASSSX

STMicroelectronics · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)

STM8AF6246TASSSX from STMicroelectronics, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NRST bidirectional Reset pin with an internal pull-up of 30 to 60 kΩ (Table 36), where pulses shorter than 85 ns are filtered and the external reset network must drive the level below VIL(NRST) max to be recognised.
2 PA1/OSCIN bidirectional Port A1 that serves as the resonator/crystal input (OSCIN) for the 1 to 16 MHz HSE oscillator or as the external clock input, with a frequency range of 0 to 16 MHz.
3 PA2/OSCOUT bidirectional Port A2 that serves as the resonator/crystal output (OSCOUT) of the HSE oscillator.
4 VSS power_in Digital ground; all VDD, VDDIO, VDDA and VSS pins must always be connected to the external supply.
5 VCAP power_out 1.8 V regulator capacitor pin that requires an external CEXT of 470 to 3300 nF with ESR of at most 0.3 Ω and ESL of at most 15 nH (Table 21).
6 VDD power_in Digital power supply with a standard operating voltage of 3.0 to 5.5 V (Table 21).
7 VDDIO_1 power_in I/O power supply that must be connected to the same external supply as VDD (3.0 to 5.5 V operating range).
8 PF4/AIN12 bidirectional Port F4 analog input 12 that is not selectable in ADC scan mode or with the analog watchdog and enables a pull-up during the reset phase.
9 VDDA power_in Analog power supply for the ADC, specified from 3 to 5.5 V (Table 40).
10 VSSA power_in Analog ground for the ADC reference and analog inputs.
11 PB5/AIN5 bidirectional Port B5 analog input 5 that becomes I2C_SDA when option bit AFR6 is set.
12 PB4/AIN4 bidirectional Port B4 analog input 4 that becomes I2C_SCL when option bit AFR6 is set.
13 PB3/AIN3 bidirectional Port B3 analog input 3 that becomes TIM1_ETR when option bit AFR5 is set.
14 PB2/AIN2 bidirectional Port B2 analog input 2 that becomes TIM1_CH3N when option bit AFR5 is set.
15 PB1/AIN1 bidirectional Port B1 analog input 1 that becomes TIM1_CH2N when option bit AFR5 is set.
16 PB0/AIN0 bidirectional Port B0 analog input 0 that becomes TIM1_CH1N when option bit AFR5 is set.
17 PE5/SPI_NSS bidirectional Port E5 that serves as the SPI master/slave select (NSS) with standard I/O speed of up to 2 MHz.
18 PC1/TIM1_CH1 bidirectional Port C1 with high-sink capability of 8 mA that serves as Timer 1 channel 1.
19 PC2/TIM1_CH2 bidirectional Port C2 with high-sink capability of 8 mA that serves as Timer 1 channel 2.
20 PC3/TIM1_CH3 bidirectional Port C3 with high-sink capability of 8 mA that serves as Timer 1 channel 3.
21 PC4/TIM1_CH4 bidirectional Port C4 with high-sink capability of 8 mA that serves as Timer 1 channel 4.
22 PC5/SPI_SCK bidirectional Port C5 that serves as the SPI clock.
23 PC6/SPI_MOSI bidirectional Port C6 that serves as the SPI master out / slave in data line.
24 PC7/SPI_MISO bidirectional Port C7 that serves as the SPI master in / slave out data line.
25 PD0/TIM3_CH2 bidirectional Port D0 with high-sink capability of 8 mA that serves as Timer 3 channel 2, with alternate functions TIM1_BKIN (AFR3) or CLK_CCO (AFR2) selectable by option bits.
26 PD1/SWIM bidirectional Port D1 with high-sink capability of 8 mA that serves as the SWIM data interface and is in input pull-up during reset and after reset release.
27 PD2/TIM3_CH1 bidirectional Port D2 with high-sink capability of 8 mA that serves as Timer 3 channel 1, remappable to TIM2_CH3 by option bit AFR1.
28 PD3/TIM2_CH2 bidirectional Port D3 with high-sink capability of 8 mA that serves as Timer 2 channel 2, remappable to ADC_ETR by option bit AFR0.
29 PD4/TIM2_CH1/BEEP bidirectional Port D4 with high-sink capability of 8 mA that serves as Timer 2 channel 1, remappable to the BEEP output by option bit AFR7.
30 PD5/LINUART_TX bidirectional Port D5 that serves as the LINUART data transmit output.
31 PD6/LINUART_RX bidirectional Port D6 that serves as the LINUART data receive input.
32 PD7/TLI bidirectional Port D7 that serves as the top level interrupt (TLI) input when configured as an interrupt pin.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LQFP-32(7x7)
Category Embedded Processors & Controllers
Pins 32

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VDDx - VSS, incl. VDDA and VDDIO) VDDx - VSS -0.3 6.5 V 50
Input voltage on true open drain pins (PE1, PE2) VIN 6.5 V 50
Total current into VDDIO power lines (source) IVDDIO 100 mA 51
Output current sunk by any I/O and control pin IIO 20 mA 51
Output current sourced by any I/O and control pin IIO -20 mA 51
Injected current on any pin IINJ(PIN) -10 10 mA 51
Storage temperature range TSTG -65 150 °C 51
Maximum junction temperature TJ 160 °C 51
Internal CPU clock frequency fCPU 0 16 MHz TA = -40 °C to 150 °C 52
Standard operating voltage (VDD/VDDIO) VDD/VDDIO 3 5.5 V 52
Ambient temperature, suffix A TA -40 85 °C Suffix A 52
Junction temperature range, suffix A TJ 90 °C Suffix A 52
Power dissipation, LQFP32 PD 85 mW All temperature ranges 52
CEXT capacitance of external VCAP capacitor CEXT 470 3300 nF 52
ESR of external VCAP capacitor ESR 0.3 Ω at 1 MHz 52
ESL of external VCAP capacitor ESL 15 nH 52
VDD rise time rate tVDD 2 µs/V 53
Reset release delay tTEMP 1 1.7 ms VDD rising 53
Power-on reset threshold VIT+ 2.65 2.8 2.95 V 53
Brown-out reset threshold VIT- 2.58 2.73 2.88 V 53
Operating voltage (code execution) VDD 2.6 5.5 V fCPU is 0 to 16 MHz with 0 ws 62
Supply current in Run mode, code from Flash IDD(RUN) 7.4 14 mA All peripherals clocked, code from Flash, HSE external clock (no resonator), fCPU = 16 MHz 54
Supply current in Run mode, code from RAM and EEPROM IDD(RUN) 3.7 5 mA All peripherals clocked, code from RAM and EEPROM, HSE external clock (no resonator), fCPU = 16 MHz 54
Supply current in Wait mode IDD(WFI) 1.65 2.5 mA CPU stopped, all peripherals off, HSE external clock, fCPU = 16 MHz 54
Supply current in Slow mode IDD(SLOW) 1.5 1.95 mA fCPU = 125 kHz, all peripherals off, code from RAM, ext. clock 16 MHz 54
Supply current in Halt mode IDD(H) 5 35 µA Main voltage regulator off, Flash power-down, clocks stopped 55
Supply current in Active-halt mode, regulator on, ext. clock IDD(AH) 770 900 µA MVR on, Flash power-down, ext. clock 16 MHz, fMASTER = 125 kHz 55
Supply current in Active-halt mode, regulator on, LSI IDD(AH) 150 230 µA MVR on, Flash power-down, LSI clock 128 kHz 55
Supply current in Active-halt mode, regulator off, LSI IDD(AH) 25 42 µA MVR off, Flash power-down, LSI clock 128 kHz 55
Wakeup time from Active-halt mode, regulator on tWU(AH) 10 30 µs Operating mode, TA = -40 to 150 °C 55
Programming current IDD(PROG) 1 1.7 mA VDD = 5 V, -40 °C to 150 °C, erasing and programming data or Flash program memory 56
User external clock source frequency fHSE_ext 0 16 MHz TA is -40 to 150 °C 57
OSCIN input leakage current ILEAK_HSE -1 1 µA VSS < VIN < VDD 57
Recommended load capacitance (CL1/CL2) CL1/CL2 20 pF 58
HSI oscillator accuracy (factory calibrated) -5 5 % 3.0 V ≤ VDD ≤ 5.5 V, -40 °C ≤ TA ≤ 150 °C 60
LSI frequency fLSI 112 128 144 kHz 60
LSI oscillator wakeup time tsu(LSI) 7 µs 60
Flash program memory endurance (erase/write cycles) NWE 1000 cycles TA = 25 °C 62
Data memory endurance (erase/write cycles) NWE 300 k cycles TA = 25 °C 62
Data memory endurance (erase/write cycles) NWE 100 k cycles TA = -40 °C to 125 °C 62
Flash program memory data retention time tRET 40 years TA = 25 °C 62
Output low level voltage, high sink and true open drain I/O VOL 0.5 V VDD = 5 V, I = 8 mA 63
Output low level voltage, standard I/O VOL 0.6 V VDD = 5 V, I = 3 mA 63
Output low level voltage, standard I/O VOL 0.4 V VDD = 3 V, I = 1.5 mA 63
Pull-up resistor Rpu 35 50 65 kΩ VDD = 5 V, VIN = VSS 63
Digital input pad leakage current Ilkg -1 1 µA VSS ≤ VIN ≤ VDD 63
Analog input pad leakage current Ilkg ana -250 250 nA VSS ≤ VIN ≤ VDD, -40 °C < TA < 125 °C 63
Total current on either VDDIO or VSSIO IDDIO 60 mA Including injection currents 63
NRST output low level voltage VOL(NRST) 0.6 V IOL = 3 mA 67
NRST pull-up resistor RPU(NRST) 30 40 60 kΩ 67
Analog supply voltage VDDA 3 5.5 V 73
Positive reference voltage VREF+ 2.75 V 73
Negative reference voltage VREF- 0.5 V 73
Total unadjusted error /ET/ /ET/ 1.4 3 LSB VDDA = 5 V, fADC = 2 MHz 74
Offset error /EO/ /EO/ 0.8 3 LSB VDDA = 5 V, fADC = 2 MHz 74
Integral linearity error /EL/ /EL/ 0.7 1.5 LSB VDDA = 5 V, fADC = 2 MHz 74
Electrostatic discharge voltage (human body model) VESD(HBM) 4000 V TA = 25 °C, conforming to JESD22-A114 76
Electrostatic discharge voltage (charge device model) VESD(CDM) 500 V TA = 25 °C, conforming to JESD22-C101 76
Electrostatic discharge voltage (machine model) VESD(MM) 200 V TA = 25 °C, conforming to JESD22-A115 76
Thermal resistance junction-ambient, LQFP 32 - 7x7 mm ΘJA 59 °C/W JEDEC JESD51-2, 4-layer PCB, natural convection 88

CAD (KiCad official)

  • Symbol: STM8AF6246TASSSX
  • Footprint: Package_QFP:LQFP-32_7x7mm_P0.8mm
  • 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
  • 3D model files: stm8af6246tasssx-etched.step / stm8af6246tasssx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm8af6246tasssx.step / stm8af6246tasssx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (99 pp, sha256 b2515811c84033b5, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF