Generated by kicad-footprint-generator · KiCad file format 20260206
STM8AF6223PCAU
STMicroelectronics · ST Microelectronics · TSSOP-20
STM8AF6223PCAU from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PD4 | bidirectional | Port D4 high-sink I/O whose default functions are Timer 5 channel 1 or BEEP output, with LINUART clock available as a remapped function. |
| 2 | PD5 | bidirectional | Port D5 high-sink I/O whose functions are analog input 5 or LINUART data transmit. |
| 3 | PD6 | bidirectional | Port D6 high-sink I/O whose functions are analog input 6 or LINUART data receive. |
| 4 | NRST | bidirectional | Reset pin of the device. |
| 5 | PA1 | bidirectional | Port A1 used as resonator or crystal input; in Halt/Active-halt it is set to input weak pull-up and cannot be used to wake the device. |
| 6 | PA2 | bidirectional | Port A2 used as resonator or crystal output. |
| 7 | VSS | power_in | Digital ground. |
| 8 | VCAP | passive | Connection for the 1.8 V regulator capacitor. |
| 9 | VDD | power_in | Digital power supply. |
| 10 | PB5 | bidirectional | Port B5 true open-drain I/O used as I2C data, with Timer 1 break input available as a remapped function. |
| 11 | PB4 | bidirectional | Port B4 true open-drain I/O used as I2C clock, with ADC external trigger available as a remapped function. |
| 12 | PB1 | bidirectional | Port B1 high-sink I/O whose functions are Timer 1 inverted channel 2 or analog input 1. |
| 13 | PB0 | bidirectional | Port B0 high-sink I/O whose functions are Timer 1 inverted channel 1 or analog input 0. |
| 14 | PC4 | bidirectional | Port C4 high-sink I/O whose functions are Timer 1 channel 4, configurable clock output or analog input 2, with Timer 1 channel 2 as a remapped function. |
| 15 | PC5/SPI_SCK | bidirectional | Port C5 high-sink I/O used as SPI clock, with Timer 5 channel 1 available as a remapped function. |
| 16 | PC6 | bidirectional | Port C6 high-sink I/O used as SPI master out or slave in, with Timer 1 channel 1 available as a remapped function. |
| 17 | PC7 | bidirectional | Port C7 high-sink I/O used as SPI master in or slave out, with Timer 1 channel 2 available as a remapped function. |
| 18 | PD1 | bidirectional | Port D1 high-sink I/O used as SWIM data interface, which is input pull-up during the reset phase and after internal reset release. |
| 19 | PD2 | bidirectional | Port D2 high-sink I/O whose functions are analog input 3, with Timer 5 channel 3 and top level interrupt available as remapped functions. |
| 20 | PD3 | bidirectional | Port D3 high-sink I/O whose functions are analog input 4, Timer 5 channel 2 or ADC external trigger. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDDx - VSS | -0.3 | 6.5 | V | 54 | ||
| Input voltage on true open drain pins | VIN | 6.5 | V | true open drain pins; min printed as VSS - 0.3 | 54 | ||
| Variations between different power pins | /VDDx - VDD/ | 50 | mV | 54 | |||
| Variations between ground pins | /VSSx - VSS/ | 50 | mV | 54 | |||
| Total current into VDD lines | IVDD | 100 | mA | source | 55 | ||
| Total current out of VSS lines | IVSS | 80 | mA | sink | 55 | ||
| Output current sunk by any I/O | IIO | 20 | mA | sunk | 55 | ||
| Output current sourced by any I/O | IIO | -20 | mA | source | 55 | ||
| Injected current on RST pin | IINJ(PIN) | -4 | 4 | mA | 55 | ||
| Injected current on OSCIN pin | IINJ(PIN) | -4 | 4 | mA | 55 | ||
| Injected current on any other pin | IINJ(PIN) | -4 | 4 | mA | 55 | ||
| Total injected current | ΣIINJ(TOT) | -20 | 20 | mA | sum of all I/O and control pins | 55 | |
| Storage temperature range | TSTG | -65 | 150 | °C | 55 | ||
| Maximum junction temperature | TJ | 150 | °C | 55 | |||
| Internal CPU clock frequency | fCPU | 0 | 16 | MHz | 56 | ||
| Standard operating voltage | VDD | 3 | 5.5 | V | 56 | ||
| External capacitor on VCAP | CEXT | 470 | 3300 | nF | 56 | ||
| ESR of external capacitor | ESR | 0.3 | Ω | at 1 MHz | 56 | ||
| ESL of external capacitor | ESL | 15 | nH | 56 | |||
| Power dissipation TSSOP20 | PD | 45 | mW | TA = 125 °C for suffix C version | 56 | ||
| Ambient temperature suffix C | TA | -40 | 125 | °C | suffix C version | 56 | |
| Junction temperature suffix C | TJ | -40 | 130 | °C | suffix C | 56 | |
| Thermal resistance junction-ambient TSSOP20 | ΘJA | 110 | °C/W | TSSOP20 - 4 x 4 mm | 103 | ||
| VDD rise time rate | tVDD | 2 | µs/V | 57 | |||
| Reset release delay | tTEMP | 1.7 | ms | VDD rising | 57 | ||
| Power-on reset threshold | VIT+ | 2.6 | 2.7 | 2.85 | V | 57 | |
| Brown-out reset threshold | VIT- | 2.5 | 2.65 | 2.8 | V | 57 | |
| Brown-out reset hysteresis | VHYS(BOR) | 70 | mV | 57 | |||
| Run supply current, code from RAM, HSI | IDD(RUN) | 1.7 | 2 | mA | VDD = 5 V, fCPU = fMASTER = 16 MHz, HSI RC osc. (16 MHz) | 58 | |
| Run supply current, code from Flash, HSI | IDD(RUN) | 3.7 | 4.5 | mA | VDD = 5 V, fCPU = fMASTER = 16 MHz, HSI RC osc. (16 MHz) | 59 | |
| Wait mode supply current, HSI | IDD(WFI) | 0.89 | 1.5 | mA | VDD = 5 V, fCPU = fMASTER = 16 MHz, HSI RC osc. (16 MHz) | 60 | |
| Halt mode current, Flash power-down, max at 85 °C | IDD(H) | 6 | 20 | µA | VDD = 5 V, Flash in power-down mode, HSI clock after wakeup, max at 85°C | 62 | |
| Halt mode current, Flash power-down, max at 125 °C | IDD(H) | 6 | 55 | µA | VDD = 5 V, Flash in power-down mode, HSI clock after wakeup, max at 125°C | 62 | |
| Supply current in reset state | IDD(R) | 400 | µA | VDD = 5 V | 63 | ||
| Reset pin release to vector fetch | tRESETBL | 150 | µs | 63 | |||
| User external clock frequency | fHSE_ext | 0 | 16 | MHz | 67 | ||
| OSCIN input leakage current | ILEAK_HSE | -1 | 1 | µA | VSS < VIN < VDD | 67 | |
| External high-speed oscillator frequency | fHSE | 1 | 16 | MHz | 68 | ||
| Recommended load capacitance | C | 20 | pF | 68 | |||
| Oscillator transconductance | gm | 5 | mA/V | 68 | |||
| HSI frequency | fHSI | 16 | MHz | 69 | |||
| HSI accuracy (factory calibrated) | ACCHS | -5 | 5 | % | 3.0 V ≤ VDD ≤ 5.5 V, -40 °C ≤ TA ≤ 150 °C | 69 | |
| LSI frequency | fLSI | 110 | 128 | 150 | kHz | 70 | |
| Flash operating voltage (all modes) | VDD | 3 | 5.5 | V | fCPU is 0 to 16 MHz with 0 ws | 70 | |
| Standard programming time | tprog | 6 | 6.6 | ms | byte/word/block (1 byte/4 byte/64 byte) | 70 | |
| Erase time for 1 block | tERASE | 3 | 3.3 | ms | 64 byte | 70 | |
| Flash endurance | NWE | 1000 | cycles | TA = 25 °C | 71 | ||
| Input hysteresis | Vhys | 700 | mV | 72 | |||
| Pull-up resistor | Rpu | 35 | 55 | 80 | kΩ | VDD = 5 V, VIN = VSS | 72 |
| Digital input pad leakage current | Ilkg | -1 | 1 | µA | VSS ≤ VIN ≤ VDD | 72 | |
| Output low level, standard ports | VOL | 2 | V | IIO = 10 mA, VDD = 5 V, 8 pins sunk | 74 | ||
| Output high level, standard ports | VOH | 2.8 | V | IIO = 10 mA, VDD = 5 V, 8 pins sourced | 74 | ||
| Output low level, high sink ports | VOL | 0.8 | V | IIO = 10 mA, VDD = 5 V, 8 pins sunk | 75 | ||
| Output high level, high sink ports | VOH | 4 | V | IIO = 10 mA, VDD = 5 V, 8 pins sourced | 75 | ||
| NRST output low level voltage | VOL(NRST) | 0.5 | V | 79 | |||
| NRST pull-up resistor | RPU(NRST) | 30 | 55 | 80 | kΩ | 79 | |
| SPI clock frequency, master | fSCK | 0 | 8 | MHz | Master mode | 81 | |
| ADC clock frequency | fADC | 1 | 4 | MHz | VDD = 3 to 5.5 V | 86 | |
| Internal bandgap reference voltage | VBGREF | 1.19 | 1.22 | 1.25 | V | VDD = 3 to 5.5 V | 86 |
CAD (KiCad official)
- Symbol:
STM8AF6223PCAU - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
stm8af6223pcau-etched.step/stm8af6223pcau-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm8af6223pcau.step/stm8af6223pcau.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (112 pp, sha256
d9cd5dcf0815e39e, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).