STM811SW16F

{
 "schema": "adom.pads/1",
 "slug": "stm811sw16f",
 "footprint": "SOT-143",
 "generated_from": {
  "footprint": "SOT-143@sha256:80e8edd31fe81e67",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -1.0,
   -0.75
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-143@sha256:80e8edd31fe81e67"
 },
 "pad_count": 4,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.0,
    -0.75
   ],
   "rot": 0.0,
   "size": [
    0.7,
    1.0
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "VSS",
   "type": "power_in",
   "description": "Ground reference for the supervisor. Tie to the system ground plane.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-143.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.0,
    0.95
   ],
   "rot": 0.0,
   "size": [
    0.7,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "RST",
   "type": "output",
   "description": "Active-low reset output (push-pull). Asserted (driven low) whenever VCC is below the reset threshold or MR is held low; remains asserted for at least trec (~140 ms) after the fault clears. Guaranteed valid down to VCC = 1 V; both sources and sinks current.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-143.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.0,
    0.95
   ],
   "rot": 0.0,
   "size": [
    0.7,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "MR",
   "type": "input",
   "description": "Manual reset input, active low. A logic low asserts RST and keeps it asserted for trec after MR returns high. Internally pulled up to VCC via a 20 kΩ resistor, so it may be left open if unused; a normally-open push-button to GND provides a manual reset. Optional 0.1 µF cap from MR to GND for noise immunity.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-143.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.0,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    0.7,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "VCC",
   "type": "power_in",
   "description": "Monitored supply voltage input (typ. 3.0/3.3/5 V depending on threshold variant). A 0.1 µF bypass capacitor to VSS mounted close to this pin is recommended for transient immunity.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-143.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}