component
STM707M6F
Public Made by Adomby adom
STMicroelectronics Supervisor And Reset ICs, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM707M6F
STMicroelectronics · Supervisor And Reset ICs · SOIC-8
STM707M6F from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MR | input | Active-low manual reset input with internal pull-up; asserts reset output when pulled low. |
| 2 | VCC | power_in | Supply voltage input; operating range 1.0 to 5.5 V. |
| 3 | VSS | power_in | Ground. |
| 4 | PFI | input | Power-fail input; when voltage is less than 1.20 to 1.30 V, power-fail output PFO is asserted low. |
| 5 | PFO | output | Power-fail output (push-pull); driven low when PFI falls below 1.20 to 1.30 V threshold. |
| 6 | NC | unconnected | No connection. |
| 7 | RST | output | Active-low reset output; driven low when VCC falls below 4.50 to 4.75 V or MR is pulled low. |
| 8 | RST | output | Active-high reset output; driven high when VCC exceeds 4.50 to 4.75 V and MR is high. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
STM707M6F - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
stm707m6f-etched.step/stm707m6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm707m6f.step/stm707m6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (33 pp, sha256
8dd84b398c8ff01b, retrieved 2026-10-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).