← Commit history

Initial commit: component/stm706ym7f

Ray ·e97a674d77 ·
2 files changed +200
README.mdadded+44
@@ -0,0 +1,44 @@+# STM706YM7F++**STMicroelectronics** · Supervisor And Reset ICs · SOP-8++STM706YM7F from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MR | input | Active-low manual reset input with internal pull-up; asserts reset when driven low, remains asserted for minimum 140-280 ms (trec) after rising edge. |+| 2 | VCC | power_out | 5 V nominal supply voltage input; operating range 1.0 V to 5.5 V, typical supply current 40 μA. |+| 3 | VSS | power_in | Ground reference. |+| 4 | PFI | input | Power-fail input; compared to internal 1.20-1.30 V threshold (VPFI) to detect supply undervoltage condition. |+| 5 | PFO | output | Push-pull power-fail output; driven low when PFI falls below VPFI (1.20-1.30 V) to provide early warning of power failure. |+| 6 | WDI | input | Watchdog input; requires rising or falling edge transition within 1.6 s timeout period to prevent watchdog reset trigger; can be disabled by floating. |+| 7 | RST | output | Active-low reset output; asserted low when VCC < VRST (4.25-4.50 V for STM706), MR is low, or watchdog timeout occurs; minimum pulse width trec = 140-280 ms. |+| 8 | WDO | output | Push-pull watchdog output; driven low when watchdog timeout occurs or VCC falls below reset threshold; returns high upon WDI edge detection or VCC recovery above threshold. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | SOP-8 |+| Category | Power Management (PMIC) |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `STM706YM7F`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8 (KiCad packages3D, STEP)+- 3D model files: `stm706ym7f-etched.step` / `stm706ym7f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm706ym7f.step` / `stm706ym7f.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943278708838400) (33 pp, sha256 `8dd84b398c8ff01b`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/stm706ym7f-datasheet.pdf)
page.jsonadded+156
@@ -0,0 +1,156 @@+{+  "slug": "stm706ym7f",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Supervisor And Reset ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "stm706ym7f",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "stm706ym7f.kicad_sym",+    "stm706ym7f.kicad_mod",+    "stm706ym7f.glb",+    "stm706ym7f.step",+    "stm706ym7f.lbr",+    "docs/hero.png",+    "docs/stm706ym7f-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "STM706YM7F",+    "manufacturer": "STMicroelectronics",+    "package": "SOP-8",+    "pin_count": 8,+    "category": "Power Management (PMIC)",+    "subcategory": "Supervisor And Reset ICs",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943278708838400",+    "parts": {+      "symbol": "stm706ym7f.kicad_sym",+      "footprint": "stm706ym7f.kicad_mod",+      "model_3d": "stm706ym7f-etched.glb",+      "model_3d_plain": "stm706ym7f.glb",+      "model_3d_step": "stm706ym7f-etched.step",+      "model_3d_step_plain": "stm706ym7f.step",+      "lbr": "stm706ym7f.lbr"+    },+    "distributor_links": {+      "lcsc": "C2068200",+      "digikey": "497-14847-2-ND",+      "mouser": "511-STM706YM7F"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T06:34:34Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "497-14847-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "511-STM706YM7F",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "MR",+        "type": "input",+        "description": "Active-low manual reset input with internal pull-up; asserts reset when driven low, remains asserted for minimum 140-280 ms (trec) after rising edge."+      },+      {+        "number": "2",+        "name": "VCC",+        "type": "power_out",+        "description": "5 V nominal supply voltage input; operating range 1.0 V to 5.5 V, typical supply current 40 μA."+      },+      {+        "number": "3",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground reference."+      },+      {+        "number": "4",+        "name": "PFI",+        "type": "input",+        "description": "Power-fail input; compared to internal 1.20-1.30 V threshold (VPFI) to detect supply undervoltage condition."+      },+      {+        "number": "5",+        "name": "PFO",+        "type": "output",+        "description": "Push-pull power-fail output; driven low when PFI falls below VPFI (1.20-1.30 V) to provide early warning of power failure."+      },+      {+        "number": "6",+        "name": "WDI",+        "type": "input",+        "description": "Watchdog input; requires rising or falling edge transition within 1.6 s timeout period to prevent watchdog reset trigger; can be disabled by floating."+      },+      {+        "number": "7",+        "name": "RST",+        "type": "output",+        "description": "Active-low reset output; asserted low when VCC < VRST (4.25-4.50 V for STM706), MR is low, or watchdog timeout occurs; minimum pulse width trec = 140-280 ms."+      },+      {+        "number": "8",+        "name": "WDO",+        "type": "output",+        "description": "Push-pull watchdog output; driven low when watchdog timeout occurs or VCC falls below reset threshold; returns high upon WDI edge detection or VCC recovery above threshold."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 33,+        "cost_usd": 0.2057,+        "at": "2026-10-01T06:34:20"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943278708838400",+        "pages": 33,+        "sha256": "8dd84b398c8ff01b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file