component
STM706TM6F
Public Made by Adomby adom
STMicroelectronics Supervisor And Reset ICs, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownSTM706TM6F
STMicroelectronics · Supervisor And Reset ICs · SOP-8
STM706TM6F from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MR | input | Active low input with internal pull-up; asserts reset output and holds it low for trec (typ. 200 ms) after MR returns high. |
| 2 | VCC | power_in | Supply voltage input, operating range 1.0 V to 5.5 V with typical quiescent current of 40 µA. |
| 3 | VSS | power_in | Ground reference. |
| 4 | PFI | input | Power-fail comparator input; asserts power-fail output low when PFI falls below threshold VPFI (typ. 1.25 V). |
| 5 | PFO | output | Power-fail output (push-pull); asserts low when PFI < VPFI with typical propagation delay of 2 µs. |
| 6 | WDI | input | Watchdog input; if input does not toggle within 1.6 s, watchdog output WDO asserts low and reset is triggered. |
| 7 | RST | output | Active low reset output; asserts low for trec (typ. 200 ms) when VCC < VRST, watchdog times out, or MR goes low; guaranteed valid down to 1.0 V. |
| 8 | WDO | output | Watchdog output (push-pull); asserts low when WDI does not toggle within 1.6 s or VCC falls below reset threshold. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
STM706TM6F - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
stm706tm6f-etched.step/stm706tm6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm706tm6f.step/stm706tm6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (32 pp, sha256
fe2adb0e76018e05, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).