main
Ray
Publish 0.1.0
1741258
STM6904TGEDS6F
STMicroelectronics · Supervisor And Reset ICs · MSOP-8
STM6904TGEDS6F from STMicroelectronics, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MR | input | Active-low manual reset input with an internal 10 kΩ pull-up to VCC; RST stays low while MR is low and for tREC after MR returns high, with a minimum MR low pulse width of 1 µs. |
| 2 | VCC | power_in | Primary supply voltage input (0.8 V to 5.5 V operating) that also serves as the input for the integrated fixed-threshold undervoltage monitor, VRST1 = 3.078 V for this order code. |
| 3 | V2IN | input | Second fixed-threshold reset monitor input, which is VRST2 = 1.110 V for this order code. |
| 4 | VSS | power_in | Ground pin for the power supply. |
| 5 | V3IN | input | Adjustable third reset comparator input with high impedance; RST is driven low when the pin voltage falls below the 600 mV internal reference, with the trip point set by an external resistor divider. |
| 6 | V4IN | input | Adjustable fourth reset comparator input with high impedance; RST is driven low when the pin voltage falls below the 600 mV internal reference, with the trip point set by an external resistor divider. |
| 7 | TRSEL | input | Reset timeout select that must be tied to VCC (tREC = 420 ms) or VSS (tREC = 210 ms) and must not be left floating. |
| 8 | RST | output | Active-low open-drain reset output, driven low when any monitored supply falls below its threshold or MR is low, and requiring a pull-up to VCC (10 kΩ suggested). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | MSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage (VCC) | VCC | 0.8 | 5.5 | V | 12 | ||
| VCC supply current | ICC | 10 | 14 | µA | VCC < 5.5 V | 12 | |
| VCC supply current | ICC | 9 | 13 | µA | VCC = 3.3 V | 12 | |
| V2IN supply current | I2IN | 3 | 5 | µA | V2IN = 3.3 V | 12 | |
| Input leakage current (MR) | ILI | 500 | 800 | µA | VIN = VSS | 12 | |
| Input leakage current (TRSEL) | ILI | -0.5 | 0.5 | µA | VIN = VSS or VCC | 12 | |
| Open drain RST output leakage current | ILO | -0.5 | 0.5 | µA | VCC > VRST; RST not asserted | 12 | |
| Output low voltage (RST; open drain) | VOL | 0.3 | V | VCC ≥ 0.8 V, ISINK = 1 µA | 12 | ||
| Output low voltage (RST; open drain) | VOL | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA | 12 | ||
| VCC reset threshold T (falling) | VRST1 | 3.047 | 3.078 | 3.109 | V | 25 °C | 12 |
| VCC reset threshold T (falling) | VRST1 | 3.023 | 3.133 | V | -40 to 85 °C | 12 | |
| V2IN reset threshold G (falling) | VRST2 | 1.099 | 1.11 | 1.121 | V | 25 °C | 13 |
| V2IN reset threshold G (falling) | VRST2 | 1.09 | 1.13 | V | -40 to 85 °C | 13 | |
| Reset timeout period tREC | tRP | 140 | 210 | 280 | ms | TRSEL = LOW (VSS) | 13 |
| Reset timeout period tREC | tRP | 280 | 420 | 560 | ms | TRSEL = HIGH (VCC) | 13 |
| V3IN, V4IN input threshold | VRSTIN | 589 | 600 | 611 | mV | 13 | |
| V3IN, V4IN input current | I3IN, I4IN | -25 | 25 | nA | V3IN, V4IN > 0.8 V | 13 | |
| MR minimum pulse width | tMLMH | 1 | µs | 13 | |||
| Storage temperature (VCC off) | TSTG | -55 | 150 | °C | VCC off | 11 | |
| Input or output voltage | VIO | -0.3 | V | upper limit VCC + 0.3 V | 11 | ||
| Supply voltage | VCC | -0.3 | 7 | V | 11 | ||
| Output current | IO | 20 | mA | 11 | |||
| Lead solder temperature | TSLD | 260 | °C | 10 seconds | 11 | ||
| Thermal resistance junction to ambient | θJA | 146 | °C/W | 11 | |||
| Ambient operating temperature | TA | -40 | 85 | °C | Industrial grade (6 temperature range) | 14 |
CAD (KiCad official)
- Symbol:
STM6904TGEDS6F - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
stm6904tgeds6f-etched.step/stm6904tgeds6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm6904tgeds6f.step/stm6904tgeds6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (20 pp, sha256
d0d30f4775cad0ba, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM6904TGEDS6F
**STMicroelectronics** · Supervisor And Reset ICs · MSOP-8
STM6904TGEDS6F from STMicroelectronics, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MR | input | Active-low manual reset input with an internal 10 kΩ pull-up to VCC; RST stays low while MR is low and for tREC after MR returns high, with a minimum MR low pulse width of 1 µs. |
| 2 | VCC | power_in | Primary supply voltage input (0.8 V to 5.5 V operating) that also serves as the input for the integrated fixed-threshold undervoltage monitor, VRST1 = 3.078 V for this order code. |
| 3 | V2IN | input | Second fixed-threshold reset monitor input, which is VRST2 = 1.110 V for this order code. |
| 4 | VSS | power_in | Ground pin for the power supply. |
| 5 | V3IN | input | Adjustable third reset comparator input with high impedance; RST is driven low when the pin voltage falls below the 600 mV internal reference, with the trip point set by an external resistor divider. |
| 6 | V4IN | input | Adjustable fourth reset comparator input with high impedance; RST is driven low when the pin voltage falls below the 600 mV internal reference, with the trip point set by an external resistor divider. |
| 7 | TRSEL | input | Reset timeout select that must be tied to VCC (tREC = 420 ms) or VSS (tREC = 210 ms) and must not be left floating. |
| 8 | RST | output | Active-low open-drain reset output, driven low when any monitored supply falls below its threshold or MR is low, and requiring a pull-up to VCC (10 kΩ suggested). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | MSOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage (VCC) | VCC | 0.8 | | 5.5 | V | | 12 |
| VCC supply current | ICC | | 10 | 14 | µA | VCC < 5.5 V | 12 |
| VCC supply current | ICC | | 9 | 13 | µA | VCC = 3.3 V | 12 |
| V2IN supply current | I2IN | | 3 | 5 | µA | V2IN = 3.3 V | 12 |
| Input leakage current (MR) | ILI | | 500 | 800 | µA | VIN = VSS | 12 |
| Input leakage current (TRSEL) | ILI | -0.5 | | 0.5 | µA | VIN = VSS or VCC | 12 |
| Open drain RST output leakage current | ILO | -0.5 | | 0.5 | µA | VCC > VRST; RST not asserted | 12 |
| Output low voltage (RST; open drain) | VOL | | | 0.3 | V | VCC ≥ 0.8 V, ISINK = 1 µA | 12 |
| Output low voltage (RST; open drain) | VOL | | | 0.4 | V | VCC ≥ 4.5 V, ISINK = 3.2 mA | 12 |
| VCC reset threshold T (falling) | VRST1 | 3.047 | 3.078 | 3.109 | V | 25 °C | 12 |
| VCC reset threshold T (falling) | VRST1 | 3.023 | | 3.133 | V | -40 to 85 °C | 12 |
| V2IN reset threshold G (falling) | VRST2 | 1.099 | 1.11 | 1.121 | V | 25 °C | 13 |
| V2IN reset threshold G (falling) | VRST2 | 1.09 | | 1.13 | V | -40 to 85 °C | 13 |
| Reset timeout period tREC | tRP | 140 | 210 | 280 | ms | TRSEL = LOW (VSS) | 13 |
| Reset timeout period tREC | tRP | 280 | 420 | 560 | ms | TRSEL = HIGH (VCC) | 13 |
| V3IN, V4IN input threshold | VRSTIN | 589 | 600 | 611 | mV | | 13 |
| V3IN, V4IN input current | I3IN, I4IN | -25 | | 25 | nA | V3IN, V4IN > 0.8 V | 13 |
| MR minimum pulse width | tMLMH | 1 | | | µs | | 13 |
| Storage temperature (VCC off) | TSTG | -55 | | 150 | °C | VCC off | 11 |
| Input or output voltage | VIO | -0.3 | | | V | upper limit VCC + 0.3 V | 11 |
| Supply voltage | VCC | -0.3 | | 7 | V | | 11 |
| Output current | IO | | | 20 | mA | | 11 |
| Lead solder temperature | TSLD | | | 260 | °C | 10 seconds | 11 |
| Thermal resistance junction to ambient | θJA | | 146 | | °C/W | | 11 |
| Ambient operating temperature | TA | -40 | | 85 | °C | Industrial grade (6 temperature range) | 14 |
## CAD (KiCad official)
- Symbol: `STM6904TGEDS6F`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `stm6904tgeds6f-etched.step` / `stm6904tgeds6f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm6904tgeds6f.step` / `stm6904tgeds6f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939821276401664) (20 pp, sha256 `d0d30f4775cad0ba`, retrieved 2026-11-10, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm6904tgeds6f-datasheet.pdf)