main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs stm6821mwy6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers stm6821mwy6f: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/stm6821mwy6f · Ray
stm6821mwy6f-etched.fit.json stm6821mwy6f: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
stm6821mwy6f-etched.glb stm6821mwy6f: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
stm6821mwy6f-etched.step stm6821mwy6f: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC bod… · Ray
stm6821mwy6f-hero.glb stm6821mwy6f: hero from the plain model · Ray
stm6821mwy6f-hero.overlay.json stm6821mwy6f: hero from the plain model · Ray
stm6821mwy6f.glb Publish 0.1.0 · Ray
stm6821mwy6f.kicad_mod Publish 0.1.0 · Ray
stm6821mwy6f.kicad_sym Publish 0.1.0 · Ray
stm6821mwy6f.lbr Publish 0.1.0 · Ray
stm6821mwy6f.step Publish 0.1.0 · Ray

STM6821MWY6F

STMicroelectronics · Supervisor And Reset ICs · SOT-23-5

STM6821MWY6F from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RST output Active-high push-pull reset output (inverse of RST); asserted high whenever VCC falls below VRST (4.270-4.490 V for M-grade), watchdog timeout occurs, or MR is logic low; VOH ≥ 0.8 VCC with ISOURCE up to 800 µA (VCC ≥ 4.25 V); remains asserted for trec (140-280 ms, typ. 200 ms) after fault clears.
2 VSS power_in Ground (0 V supply return).
3 MR input Active-low manual/push-button reset input with internal 52 kΩ (typ.) pull-up resistor; a logic low asserts the reset output and holds it for trec after MR returns high; VIL < 0.3 VCC (VRST < 4.0 V); minimum pulse width 1 µs; may be left open if unused.
4 WDI input Watchdog input; if held static (high or low) for ≥ tWD (typ. 1.6 s, range 1.12-2.24 s) the watchdog timer expires and reset is asserted; timer clears on any rising or falling edge or while reset is asserted; WDI = VCC draws up to 160 µA (time-average); float or tristate to disable watchdog (max leakage 10 µA, max load capacitance 200 pF).
5 VCC power_in Supply voltage, 1.0 to 5.5 V operating range; quiescent ICC 4 µA typ. / 12 µA max (MR and WDI unconnected, VCC < 3.6 V); reset output guaranteed valid down to VCC = 1.0 V (TA = 0 to 85 °C).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

CAD (KiCad official)

  • Symbol: STM6821MWY6F
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: stm6821mwy6f-etched.step / stm6821mwy6f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm6821mwy6f.step / stm6821mwy6f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (31 pp, sha256 ba50f0fd6706f830, retrieved 2026-09-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF