main
Ray
Publish 0.1.0
6a130d4
STM6719SFWB6R
STMicroelectronics · Supervisor And Reset ICs · SOT-23-6
STM6719SFWB6R from STMicroelectronics, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Active-low open-drain reset output that is driven low whenever VCC1, VCC2 or RSTIN falls below its reset threshold or MR goes low, and stays low for trec after all monitored supplies are above their thresholds and MR returns high; connect an external pull-up to VCC1 (a 10 kΩ pull-up is sufficient for most applications). |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | MR | input | Active-low push-button manual reset input with an internal 50 kΩ pull-up (25 kΩ to 80 kΩ); RST is driven low while MR is low and for trec after it returns high, and it can be driven from TTL/CMOS logic or switched to VSS, with the input left open or tied to VCC1 when unused. |
| 4 | VCC2 | power_in | Secondary supply voltage monitoring input with factory-programmed reset thresholds from 3.08 V to 0.79 V; device operating voltage range is 0.8 V to 5.5 V. |
| 5 | RSTIN | input | High-impedance adjustable reset comparator input; RST is driven low when RSTIN falls below the 0.626 V internal reference (VRSTIN 611 mV to 642 mV), with the monitored threshold set by an external resistor divider. |
| 6 | VCC1 | power_in | Primary supply voltage monitoring input and input for the primary reset threshold, with factory-programmed reset thresholds from 4.63 V to 1.58 V; device operating voltage range is 0.8 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | VCC | 0.8 | 5.5 | V | 19 | ||
| VCC1 supply current | ICC1 | 12 | 35 | µA | VCC1 < 5.5 V, all I/O pins open | 19 | |
| VCC1 supply current | ICC1 | 8 | 23 | µA | VCC1 < 3.6 V, all I/O pins open | 19 | |
| VCC2 supply current | ICC2 | 3 | 9 | µA | VCC2 < 3.6 V, all I/O pins open | 19 | |
| VCC2 supply current | ICC2 | 2.5 | 7 | µA | VCC2 < 2.75 V, all I/O pins open | 19 | |
| Input leakage current | ILI | -1 | 1 | µA | 0 V = VIN = VCC | 19 | |
| Open drain RST output leakage current | ILO | 0.5 | µA | VCC1 > VRST1, VCC2 > VRST2; RST not asserted | 19 | ||
| Output low voltage (RST) | VOL | 0.3 | V | VCC1 or VCC2 ≥ 0.8 V, ISINK = 1 µA, RST asserted | 19 | ||
| Output low voltage (RST) | VOL | 0.4 | V | VCC1 or VCC2 ≥ 4.5 V, ISINK = 3.2 mA, RST asserted | 19 | ||
| VCC1 reset threshold, suffix S | VRST1 | 2.85 | 2.925 | 3 | V | Suffix S (falling) | 19 |
| VCC2 reset threshold, suffix F | VRST2 | 1.02 | 1.05 | 1.08 | V | Suffix F (falling) | 20 |
| RST pulse width (trec) | trec | 140 | 210 | 280 | ms | Pulse width option blank | 20 |
| RSTIN input threshold | VRSTIN | 611 | 626.5 | 642 | mV | 20 | |
| RSTIN input current | IRSTIN | -25 | 25 | nA | 20 | ||
| RSTIN to RST output delay | tRSTIND | 22 | µs | VRSTIN to (VRSTIN, 30 mV) | 20 | ||
| VCC1 to RST delay | tRD | 20 | µs | VCC1 = (VRST1 + 100 mV) to (VRST, 100 mV) | 20 | ||
| VCC2 to RST delay | tRD | 20 | µs | VCC2 = (VRST2 + 75 mV) to (VRST2, 75 mV) | 20 | ||
| MR pull-up resistance | 25 | 50 | 80 | kΩ | 21 | ||
| MR minimum pulse width (STM6717/18/19/20) | tMLMH | 1 | µs | Applies to STM6717/18/19/20 variant | 21 | ||
| MR to RST output delay | tMLRL | 200 | ns | 21 | |||
| MR glitch immunity (STM6717/18/19/20) | 100 | ns | Applies to STM6717/18/19/20 variant | 21 | |||
| Input rise and fall times | 5 | ns | 18 | ||||
| Ambient operating temperature | TA | -40 | 85 | °C | 18 | ||
| Storage temperature (VCC off) | TSTG | -55 | 150 | °C | VCC off | 17 | |
| Lead solder temperature | TSLD | 260 | °C | Lead solder temperature for 10 seconds | 17 | ||
| Input or output voltage (VCC1 referenced) | VIO | -0.3 | V | Max printed as VCC1 + 0.3 V (expression, not converted) | 17 | ||
| Input or output voltage (VCC2 referenced) | VIO | -0.3 | V | Max printed as VCC2 + 0.3 V (expression, not converted) | 17 | ||
| Supply voltage | VCC1, VCC2 | -0.3 | 7 | V | 17 | ||
| Input or output current (all pins) | IIO | 20 | mA | All pins | 17 | ||
| Power dissipation SOT23-6 | PD | 675 | mW | SOT23-6 | 17 |
CAD (KiCad official)
- Symbol:
STM6719SFWB6R - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm6719sfwb6r-etched.step/stm6719sfwb6r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm6719sfwb6r.step/stm6719sfwb6r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (30 pp, sha256
1dd8d7f2d8316ee8, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# STM6719SFWB6R
**STMicroelectronics** · Supervisor And Reset ICs · SOT-23-6
STM6719SFWB6R from STMicroelectronics, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Active-low open-drain reset output that is driven low whenever VCC1, VCC2 or RSTIN falls below its reset threshold or MR goes low, and stays low for trec after all monitored supplies are above their thresholds and MR returns high; connect an external pull-up to VCC1 (a 10 kΩ pull-up is sufficient for most applications). |
| 2 | VSS | power_in | Ground reference for the device. |
| 3 | MR | input | Active-low push-button manual reset input with an internal 50 kΩ pull-up (25 kΩ to 80 kΩ); RST is driven low while MR is low and for trec after it returns high, and it can be driven from TTL/CMOS logic or switched to VSS, with the input left open or tied to VCC1 when unused. |
| 4 | VCC2 | power_in | Secondary supply voltage monitoring input with factory-programmed reset thresholds from 3.08 V to 0.79 V; device operating voltage range is 0.8 V to 5.5 V. |
| 5 | RSTIN | input | High-impedance adjustable reset comparator input; RST is driven low when RSTIN falls below the 0.626 V internal reference (VRSTIN 611 mV to 642 mV), with the monitored threshold set by an external resistor divider. |
| 6 | VCC1 | power_in | Primary supply voltage monitoring input and input for the primary reset threshold, with factory-programmed reset thresholds from 4.63 V to 1.58 V; device operating voltage range is 0.8 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-6 |
| Category | Power Management (PMIC) |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | VCC | 0.8 | | 5.5 | V | | 19 |
| VCC1 supply current | ICC1 | | 12 | 35 | µA | VCC1 < 5.5 V, all I/O pins open | 19 |
| VCC1 supply current | ICC1 | | 8 | 23 | µA | VCC1 < 3.6 V, all I/O pins open | 19 |
| VCC2 supply current | ICC2 | | 3 | 9 | µA | VCC2 < 3.6 V, all I/O pins open | 19 |
| VCC2 supply current | ICC2 | | 2.5 | 7 | µA | VCC2 < 2.75 V, all I/O pins open | 19 |
| Input leakage current | ILI | -1 | | 1 | µA | 0 V = VIN = VCC | 19 |
| Open drain RST output leakage current | ILO | | | 0.5 | µA | VCC1 > VRST1, VCC2 > VRST2; RST not asserted | 19 |
| Output low voltage (RST) | VOL | | | 0.3 | V | VCC1 or VCC2 ≥ 0.8 V, ISINK = 1 µA, RST asserted | 19 |
| Output low voltage (RST) | VOL | | | 0.4 | V | VCC1 or VCC2 ≥ 4.5 V, ISINK = 3.2 mA, RST asserted | 19 |
| VCC1 reset threshold, suffix S | VRST1 | 2.85 | 2.925 | 3 | V | Suffix S (falling) | 19 |
| VCC2 reset threshold, suffix F | VRST2 | 1.02 | 1.05 | 1.08 | V | Suffix F (falling) | 20 |
| RST pulse width (trec) | trec | 140 | 210 | 280 | ms | Pulse width option blank | 20 |
| RSTIN input threshold | VRSTIN | 611 | 626.5 | 642 | mV | | 20 |
| RSTIN input current | IRSTIN | -25 | | 25 | nA | | 20 |
| RSTIN to RST output delay | tRSTIND | | | 22 | µs | VRSTIN to (VRSTIN, 30 mV) | 20 |
| VCC1 to RST delay | tRD | | | 20 | µs | VCC1 = (VRST1 + 100 mV) to (VRST, 100 mV) | 20 |
| VCC2 to RST delay | tRD | | | 20 | µs | VCC2 = (VRST2 + 75 mV) to (VRST2, 75 mV) | 20 |
| MR pull-up resistance | | 25 | 50 | 80 | kΩ | | 21 |
| MR minimum pulse width (STM6717/18/19/20) | tMLMH | 1 | | | µs | Applies to STM6717/18/19/20 variant | 21 |
| MR to RST output delay | tMLRL | | | 200 | ns | | 21 |
| MR glitch immunity (STM6717/18/19/20) | | 100 | | | ns | Applies to STM6717/18/19/20 variant | 21 |
| Input rise and fall times | | | | 5 | ns | | 18 |
| Ambient operating temperature | TA | -40 | | 85 | °C | | 18 |
| Storage temperature (VCC off) | TSTG | -55 | | 150 | °C | VCC off | 17 |
| Lead solder temperature | TSLD | | | 260 | °C | Lead solder temperature for 10 seconds | 17 |
| Input or output voltage (VCC1 referenced) | VIO | -0.3 | | | V | Max printed as VCC1 + 0.3 V (expression, not converted) | 17 |
| Input or output voltage (VCC2 referenced) | VIO | -0.3 | | | V | Max printed as VCC2 + 0.3 V (expression, not converted) | 17 |
| Supply voltage | VCC1, VCC2 | -0.3 | | 7 | V | | 17 |
| Input or output current (all pins) | IIO | | | 20 | mA | All pins | 17 |
| Power dissipation SOT23-6 | PD | | | 675 | mW | SOT23-6 | 17 |
## CAD (KiCad official)
- Symbol: `STM6719SFWB6R`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.45 mm tall, datasheet A, max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `stm6719sfwb6r-etched.step` / `stm6719sfwb6r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `stm6719sfwb6r.step` / `stm6719sfwb6r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/stm6719sfwb6r.pdf) (30 pp, sha256 `1dd8d7f2d8316ee8`, retrieved 2026-11-10, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/stm6719sfwb6r-datasheet.pdf)