component
STM6601CM2DDM6F
Public Made by Adomby adom
STMicroelectronics Supervisor And Reset ICs, TDFN-12(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM6601CM2DDM6F
STMicroelectronics · Supervisor And Reset ICs · TDFN-12(2x3)
STM6601CM2DDM6F from STMicroelectronics, in a TDFN-12(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply input that is monitored during startup and normal operation and should be decoupled to ground with a 0.1 µF capacitor placed as close to the device as possible. |
| 2 | SR | input | Smart Reset button input with ±8 kV HBM ESD protection; it is active low, has an optional 100 kΩ pull-up, and must not be grounded permanently. |
| 3 | VREF | power_out | Precise 1.5 V voltage reference specified with 1% accuracy, which requires a mandatory 1 µF capacitor even when unused. |
| 4 | PSHOLD | input | Processor confirmation input with a factory-trimmed voltage detector; driving it high confirms proper power-up and driving it low during normal operation deasserts the enable output. |
| 5 | CSRD | passive | Smart Reset delay input where a capacitor to ground sets the additional tSRD time; the pin is left open when no capacitor is used. |
| 6 | PB | input | Power-on push-button input with a factory-trimmed voltage detector and ±8 kV HBM ESD protection, requiring a switch to GND and having an internal 100 kΩ pull-up. |
| 7 | VCCLO | output | High-threshold detection output that is low when VCC is below VTH+ and is active low, open drain by default, requiring a pull-up such as 10 kΩ. |
| 8 | PBOUT | output | Status output of the PB input that goes low during the tDEBOUNCE period and is active low, open drain by default, requiring a pull-up such as 10 kΩ. |
| 9 | EN | output | Push-pull enable output that is asserted high after a valid turn-on event to enable system power and is released low on the listed release conditions. |
| 10 | RST | output | Active low reset output that pulls low for tREC after startup or after a long push, open drain by default and requiring a pull-up such as 10 kΩ. |
| 11 | INT | output | Active low interrupt output asserted for at least tINT_Min on a push-button press or undervoltage condition, open drain by default and requiring a pull-up such as 10 kΩ. |
| 12 | GND | power_in | Ground reference pin for the device. |
| 13 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TDFN-12(2x3) |
| Category | Power Management (PMIC) |
| Pins | 13 |
CAD (KiCad official)
- Symbol:
STM6601CM2DDM6F - Footprint:
Package_DFN_QFN:DFN-12-1EP_2x3mm_P0.45mm_EP0.64x2.4mm - 3D model: TDFN-12(2x3) (KiCad packages3D, STEP)
- 3D model files:
stm6601cm2ddm6f-etched.step/stm6601cm2ddm6f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm6601cm2ddm6f.step/stm6601cm2ddm6f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (52 pp, sha256
24305a688f436ae9, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).